HT201263 waited almost 48 hours and need to use the iphone

i press erase all settings and contents, the loading circle is only appeared and waited for almost 48 hours. i wonder what i have to do since my lock button is no longer useful?.any help?

the lock button is barely responding since my phone had a several damage before. do u think this loading circle will stop after all the data is erased?

Similar Messages

  • I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

    I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

    Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

  • I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card.

    I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card. Serial number (removed), IMEI (removed). Thank you!
    Personal info removed to comply with the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Had to reinstall iTunes,backed up iPhone5 before the reinstall and need to restore the iPhone backup that is on the computer,Windows8, but it is not an option in the new iTunes restore menu. How do I map or add the old backup to the new iTunes?

    Had to reinstall iTunes,backed up iPhone5 before the reinstall and need to restore the iPhone backup that is on the computer,Windows8, but it is not an option in the new iTunes restore menu. How do I map or add the old backup to the new iTunes restore option?

    Hi MrsMoosie,
    I'm sorry to hear you are having these issues with your iPad. If your iPad isn't responding or doesn't appear to be charging, you may find the information and troubleshooting steps outlined in the following articles helpful, in particular the following portion:
    If you don't see the charging screen within an hour, or you see the connect to power screen, check your connector, USB cable, and power adapter. Make sure that everything is plugged in firmly, free of debris, and not damaged. You might want to try a different USB cable or power adapter.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.

    How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.Help me, anyone? Thanks in advance.

    Just to add.....I created a folder on my PC to store all videos taken from my iPhone and my wife's iPhone.
    I just cannot sync those videos taken using my wife's iPhone to my iPhone.

  • I am using Firefox for Mac (v 3.6.11, Mac OSX 10.6.4) and need to use the Function keys (specificlaly Ctrl-F7) in a web application. I can't seem to get it to work the same as in Firefox on PC.

    I am using a web application that requires the use of the F7 key. Actually, to be more precise, I need the functionality that you would get on a PC if you hit Ctrl-F7 while in this web application in Firefox. I have changed the Mac's settings to allow standard use of the function keys (rather things like volume up/down, etc.) However, when I try to use Ctrl-F7 it appears to be using the function that is built into Firefox browser rather than the web application running within Firefox. (FYI, nothing happens when I try Cmd-F7 or Alt/Option-F7 either).

    Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
    For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Lests say you travel for 1 hour and you are using the gps in your iphone for 1 Continuous hours will that affect your iphone lifetime?

    will that affect the iphone parts and make it damage?

    Using the phone for one hour, or leaving the phone on and in standby for one hour, will reduce the total life expectancy of your phone by exactly one hour...
    On a similar note, if you continue breathing for one year, at the end of that year, the total remainder of your life will have been shortened by exactly 1 year... That is not to say that you will be expected to die at the age of say, 75 instead of 76, but rather, one of your 76 years has now been used...

  • Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen.  Even ending a call is difficult as the screen blanks out within seconds

    I have to use the Keypad a lot when making calls.  Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out.  Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions.  Back and forth just trying to enter the options is a pain.  Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
    If I use the Speaker function the keypad works; the speakler phone is not alway appropriate. 
    It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle.  This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates.  It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem. 
    I'm not sure if it's a hardware or software (design) issue.

    It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
    Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

  • Women User's Issues: Acrylic nails and inability to use the iPhone

    OK, I know that this may seem to be a trivial issue at first glance. However, did no one at Apple actually have women who wear artificial nails (AKA acrylic nails) Beta-test the iPhone's touch screen?
    My girlfriend wears them. Her current phone has to be replaced, so I walked her into an Apple store and had a salesman demo the iPhone. My sweety loved 95% of its capabilities and features - it lacked only a voice-activated dialing feature.
    Here's the reason she did not purchase an iPhone on the spot: You have to use your fingers to use it! Women with long, natural nails, and in this case, artificial nails can't make skin contact with the screen. Forget trying to type in an email or text message. The salesman obviously had never encountered this particular end-user "bug" and had no work around. My girlfriend spent a half-hour fumbling around, using her knuckles, the sides of her fingers, etc. and finally the salesman threw up his hands and said that he had to go help other customers. Gee, thanks for the help buddy.
    Since the iPhone can't be used with a stylus, what's the work around? And no, my girlfriend, and all of the other women who wear artificial nails are NOT going to stop wearing them. Only a techno-geek would suggest that as a viable alternative.
    What has worked for you ladies?
    Thanks so much.

    RDPowell,
    I have seen two suggestions on these discussions, holding your hand at a flatter angle so that the pads at the end of the finger touch.
    Another user posted they use the side of their fingers.
    Here are some threads that discuss what others have done:
    http://discussions.apple.com/thread.jspa?threadID=1227227
    Medium length fingers mentioned in the second post:
    http://discussions.apple.com/thread.jspa?threadID=1029547
    Suggestion to use thumbs:
    http://discussions.apple.com/thread.jspa?threadID=1057740
    Using knuckles is mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=1300856
    Hope this helps,
    Nathan C.

  • HT1688 i have a iphone 4 for my sisten from Unite State, I'm living in Dominican REpublic and i cant use the iphone here

    Hello i wanna desblock my iphone in dominicam republic
    IMEI: 01 326800 367768 6
    ICCID: Unknow

    Only the carrier it's locked to can authorize unlocking it.
    If the phone is displaying ICCID unknown, then it's a brick. That's a critical failure, usually caused by jailbreaking/hacking. It can not be fixed.

  • I need to use the F12 key as a function key not as volume

    I am using a DOS system for work and need to use the F12 key as a function key and not volume how to I do this....... frustrating!

    Tried that still changes volume

  • I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

    I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
    Thanks,
    David

    wjosten wrote:
    Phil0124 wrote:
    I doubt the phone is locked to GCI in any way
    Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
    Fact is your post won't help the OP.
    And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
    Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
    Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

  • After clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading".  i turned computer off thinking something was wrong.  now itunes won't open at all.  do i need to download itunes again?

    after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading".  i turned computer off thinking something was wrong.  now itunes won't open at all.  do i need to download itunes again?

    Did you actually download the installer from Apple or did you use Software Update.  You can download the installer http://www.apple.com/itunes/download/
    Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time.  And of course make a backup of your whole library first.  It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates.  Better safe...

  • We have 30 ipads at our school and it is great.  We are about 850 student on my school and everyone are using the ipads. One hour at the time. (we have a booking system.)   I teach music and are using Garageband. I need to find away were my students that

    We have 30 ipads at our school and it is great.  We are about 850 student on my school and everyone are using the ipads. One hour at the time. (we have a booking system.)
    I teach music and are using Garageband. I need to find away were my students that are working on a project can export the files and save them somewhere, so when they 7 days later open Garage band can import there song with all the correct  midi-tracks. When I export the song to Icloud the song become an Mp4 file (I think).  And I can import the files via Icloude.
    This is because too many times the song has been sabotages during the week
    Dan Sweden

    Dan,
    your students could store their projects in iCloud, only you would continously have to change the AppleIDs of the iPads, so each student could store the songs with their own AppleID.  I don't think this will be feasable.
    The other possibility would be to share the projects to iTunes and to download them to iTunes  on a Mac at the end of each lesson. Does your school have Macs? This will not work with PCs.
    See this link:  GarageBand for iPad: Get answers fast http://help.apple.com/garageband/ipad/1.2/index.html#chsec12c387
    Look at the section "Share GarageBand songs",   
    Send a GarageBand song to iTunes:
    -- Léonie

  • My iphone4 has been stuck on the connect to itunes logo for a few hours.I connect it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes.I'm afraid that if I restore it I will loose everything help

    My iphone4 has been stuck on the connect to itunes logo for a few hours. I connected it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes. I'm afraid that if I restore it I will loose everything help please!!

    AT this point whatever data you have on yoru phone is already gone since it is in recovery mode. 
    However you can restore from your backup, when your phone reboots from recovery.
    YOu do have a backup right?

Maybe you are looking for

  • Why does Motion crash when I try to remove rigged parameter?

    Each time I try to remove a rigged Mask source drop well Motion crashes. This video shows the steps I take. Will you please see if you can recreate the crash? I've tested this on two different Mac computers (Macbook Pro with Lion and Macbook with Sno

  • Client Security Solution - System Key Recovery - After Lenovo Service

    I have a T61p running Windows 7, which I recently had to send to Lenovo for service after the video failed. According to my repair summary, the motherboard on the computer was replaced. I received the laptop back today, and now when I log on, the sys

  • TS1589 My amber light keeps blinking on my airport extreme

    The utility tells me there is no internet connection but I know there is because my old router connects. What do I do next?

  • Why queries added to QueriesTableAdapter don't work?

    Greetings community, Greetings community, First, my apology for not putting the code in the code window, but when I try to do this with more than one code window, posting doesn’t work. I tried to mix one SQL code window and two VB.NET code windows, b

  • About XMLSocket reconnection

    hello: I got a question about XMLSocket. The problem is this: if the connection is established to the server then it is done. if the connection is not successfully established then it will retry the connection 10 seconds later. here is my code: class