HT201263 why Ipad 2 goes to recovery mode automatically

can some one suggest me why this happening after restoring data through recovering mode. its shut down automatically and needs againg to restore

Did you do it like this?
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

Similar Messages

IPad goes into recovery mode every time I power up

Is this normal? What could be wrong?

It is by no means normal. When you say that it goes into recovery mode, do you mean that you have to restore the iPad every time that you turn it on?

HT201263 Putting iPad out of recovery mode

I tried to update my iPad to IOS 8 and it just went into recovery mode. How do i take it out of recovery mode without losing my media e.g. pictures

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

IPad 3 goes into recovery mode after every update

I purchased an iPad 3 in September 2012. When I installed iOS7, the iPad went into recovery mode and had to be restored to factory settings. Yesterday, I tried installing iOS 7.0.3 and it did the same thing, and I had to restore it from a backup (which I was smart enough to make before installing this update). Before installing iOS 7.0.3, I was having problems with the iPad randomly going to the black apple screen for a few seconds and then returning to normal. Any idea what is going on? Do I have a v

I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
1) Download and install TinyUmbrella for your PC/Mac.
2) Make sure iTunes isn't running and connect your device via USB.
3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
4) Profit.

HT201263 It is normal, when your ipad is in recovery mode and your itunes is updating software and my ipad screen back to the apple logo??

It is normal, when your ipad is in recovery mode and your itunes starting downloading 1 item (ipad software update) and in few minutes my ipad screen back to the apple logo?? It is ok ?

Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using one of these programs to place the iPod in recovery mode
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella

Windows and iTunes won't recognize my iPad outside of recovery mode

Okay, so there's a lot.
1) Unless I put the iPad into recovery mod, plugging in my iPad to my laptop gets no alert sound whatsoever, meaning it's not being recognized. The only thing that I DO get, is the iPad charging. However, there's more! My iPad sometimes appears like it's not even being plugged in, no charging, no recognition. But it's not my cable, I tried my brother's newer cable and the same thing happened. I plugged my cable into my wall charger and into a socket -- works perfectly.
2) Sometimes, the iPad would get detected by Windows and install drivers, but iTunes still wouldn't pick it up or start automatically. I checked into the device manager and Devices and Printers, it was listed there and the status said it was working fine. I tried updating the drivers, it said the drivers were the best ones available. This is no longer happening however, due to further developments listed lower.
3) I tried everything here: iOS: Device not recognized in iTunes for Windows and nothing works there. That includes uninstalling all iTunes/Apple related software in the specified order somewhere in the help sections, restarting the laptop, and then installing iTunes and restarting again. Didn't work.
4) I tried stopping/starting the Apple Mobile Device process in Control Panel>Services. No effect.
4) I tried the steps where you go into Common Files>apple>x>xdrivers and using the file there, but it would say it's incompatible or something to that effect. So that didn't work.
5) I restored my iPad without iTunes. When I attempted to restore the iPad with iTunes, it gave me an error message (4005,I think), and said it could not be restored. Full stop. Thus why I wiped the iPad using the option in Settings>General on the iPad itself. But wiping it achieved nothing.
6) I put my iPad back into recovery mode to get it recognized in iTunes and Windows again, where before I could get out of recovery mode, I can no longer do that and it appears to be stuck on that screen. Turning it off doesn't change that, because when I turn it back on, it goes directly back to the screen with the Cable + iTunes logo image.
7)Note again, that being in recovery mode will *almost* always allow my laptop and iTunes to recognize the iPad. If I look into Devices and Printers now, it doesn't show up as iPad, it shows up as Apple Mobile USB Device Driver. in iTunes, it shows up as iPad and I get the notice "iTunes has detected an iPad in recovery..."
8) My iPhone works fine and can update, get immediately recognized, etc. So I'm also sure there's no problem with my USB ports in terms of being functional.
Please help me. This has been really frustrating.

You should use a USB port on the back of your computer when you connect. What other devices do you have connected to the USB chain (other than your keyboard and mouse)?
You need to read this article: http://docs.info.apple.com/article.html?artnum=305136 Even if no new driver is available for your computer, reload the USB Driver following the instructions in the article.
Once your iPod can be seen in Device Manager in Windows, change the drive letter on the iPod to something higher (try M or P) and then reformat it (FAT32 format, don't do a quick format). After this Restore it in iTunes.

Ipad stuck on recovery mode each time it sleeps

Suddenly, I couldn't turn on my iPad and when I connected it to iTunes a message appeared indicating that it is on recovery mode and I need to restore it, there were problems with restoring it and it was stuck with apple logo and "waiting for ipad" status for a long time, after multiple tries I managed to restore it successfully and was extremely happy when the ipad works fine, but unfortunately when the ipad sleeps this goes all over again and it is on recovery mode
I tried the same thing all over again and this cycle goes over and over, why it is on recovery mode each time it sleeps? this is frustrating , please any advice would be appreciated, your help is needed.
Thank you so much for your cooperation.

If you did not have modified software installed prior to updating the software and you are not trying to downgrade the iOS version, this error is pointing towards a hardware issue and you'll have to get the phone checked.
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

IPhone 3G goes into Recovery Mode after every restore

Every time I restore my iPhone 3G, it goes into recovery mode right after an error-less restore has been completed. Yes, I've tried using tools such as TinyUmbrella and RecBoot and iRecovery. The device was not jailbroken when I tried to update it to 4.2.1 yesterday. They all reboot the phone and just throw it back into recovery. I have no idea what to do. Searching is futile. I thought I might as well do what I almost never do and ask these communities for support.
I hope they don't disappoint.

I had this problem with my wife's iPad when I updated to 7.0.3 via OTA. It was easily fixed for me, and I assume it should work for everyone else.
It appears that sometimes during installation of the OTA update to 7.0.3, it gets stuck in recovery half way through.
You can connect it to iTunes and restore it, which will wipe it, OR you can download TinyUmbrella and kick it out of recovery. Once you do that, the installer should complete normally (it did for me).
1) Download and install TinyUmbrella for your PC/Mac.
2) Make sure iTunes isn't running and connect your device via USB.
3) Open up TinyUmbrella. Your device should show up on the left. Click on it and then choose "exit recovery".
4) Profit.

Iphone 3g randomly goes into recovery mode all the time?

I have an Iphone 3g version 4.3.5 (8L1). It works fine and i've never dropped it or anything like that. But the first time the problem happened i had just got done sending a text, pushed the lock button, and put it in my pocket. Then a few minutes later i pulled it out to check it and it wouldnt turn on. I held the lock button down and the connect to itunes icon came up, but nothing else. No emergency call option or anything. it wouldnt go away. i connected to itunes and it said it was in recovery mode. I tried to restore it but it came up with an error. i left it and tried again later. i restored but some things were erased. then it worked fine again. but later that night it did it again. so i just plugged it into the charger. in the morning i tried turning it back on again and it turned on without the connect to itunes icon. worked fine all day. but it does this every now and then. when i plug it in it goes back to normal after 10-20 mins. its annoying tho and if im not home my fone is stuck like that until i get back. why does it keep randomly going into recovery mode?

1. The latest iOS version available for the iPhone 3G is 4.2.1, not 4.3.5. Do you actually have an iP3GS or was your iP3G hacked to install 4.3.5?
http://support.apple.com/kb/HT3939
2. "I tried to restore it but it came up with an error." What EXACT error?
3. "i restored but some things were erased" What "things"? Did you get an error again. Were you restoring as new or using a backup?
4. Did you ever restore the phone as NEW without using a backup?

How to get ipad out of recovery mode?

how do I get my ipad OUT of recovery mode. i don't want anything deleted.

If you are already in recovery mode, then your data is already lost. Your only option is to restore through iTunes then reload your most recent backup which you say was some time ago. This is why you need to backup everything at least once a week. Then when problems arise, you haven't lost a lot of information.

HT1414 iphone 4 goes into recovery mode error 40

iphone 4 keeps going into recovery mode, when try to restore the iphone it comes up with error code (40), how can this be fixed?

Hi November-Rain,
I found the following information about error code 40:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
This information was found here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers!
- Ari

Ipad stuck in recovery mode after accidentally unplugging it while updating

ipad stuck in recovery mode after accidentally unplugging it while updating to ios 4.2 . and when trying to restore it back it wont restore, restroing error code is 6 what to do ?

I'm not sure what you can do at this point. If I had been in your shoes, I would have kept the pics in the camera's SD cards until my return home.
I'm really reluctant to suggest this but, at this point, you probably can't lose. Do a "Restore." Be forewarned that it could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
Edit...
I just took a peek at the TinyUmbrella FAQs. Your device has been jailbroke and that's likely the reason why the problem occurred to begin with. Contact the jailbreaker for assistance. Neither Apple nor anyone on the forum can help you as we do not know the characteristics of your device.

How do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP!

how do I get data off my phone? when I plug phone into the wall and hold down the button i can get into photos and messages etc but when I plug into laptop it goes to recovery mode........therefore the data is not yet wiped? HELP! I got married last week on holidays and have not had a chance to save photos yet.

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

Ipod Touch Keeps Going Into Recovery Mode

Hi, I've had an Ipod touch for about 6 months now and haven't really had any problems with it to date. Recently (around the time I installed the 1.1.3 firmware), it seems to be randomly going into recovery mode.
When I plug it into my imac, Itunes says it detected an ipod in recovery mode, and I have to restore it. During the restore process the screen lights up with apple logo and spinning wheel, it says successful restore. But the ipod doesn't restart... just goes straight back into recovery mode. It usually takes about 2 or 3 restore attempts before it works properly. I resync and everything goes back to normal for a few uses. Then I go to turn it on and nothing... itunes just tells me to restore again.
Anyone else seen this issue before? I'm pretty sure the batteries aren't flat (since when it finally does restore, they usually start around half full... and I've tried leaving it on the charger for a few hours to no avail). And I only turn wifi on when I need it (usually turned off). I've tried pretty much everything I can find in the help files (hold button, hold+power, hold while connecting to itunes, nothing seems to wake it up... just black screen until a successful restore happens)...
Thanks in advance...

I had the same problem with my Touch but it started the first day. It was also doing weird things like telling me the battery was full then half an hour later warn me there was only 10% left. It got better for a while but long syncs with iTunes usually threw it into restore mode again.
I finally brought it to the Apple store nearby and they were able to recreate the problem when they tried a sync on their machine. They told me it was a hardware issue and did an exchange right there. I have heard bringing it to an Apple Store will increase your chances of an exchange. Sending it in may or may not get you a new one. Good luck.
Message was edited by: sdutcher

My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?

My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?
please help!

See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.

HT201263 why Ipad 2 goes to recovery mode automatically

Similar Messages

Maybe you are looking for