HT201269 Can anyone assist me to solve this issue? how to purchase apps from Apple Store using in Afghanistan?
Dear All,
I use my iPhone here in Afghanistan, and location of my Apple ID is set to US, I want to purchase some apps from Apple Store but when i enter my credit card details so it ask me for US's Credit Card, Even i could not find Afghanistan in the list of countries.
Can anyone assist me to solve this issue?
Thank You.
Sorry, but there is no iTunes Store for Afghanistan and you are not allowed to use the iTunes Store of any other country, so unless you physically go to another country and have a valid payment method issued in that country (an Afghani credit card will not be accepted), you cannot purchase apps.
Regards.
Similar Messages
-
cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?
I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).
-
I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??
Sir, Thank you very much for your prompt response. I have already done this. But the problem is still persisting. Actually, I want to upgrade my WhattsApp application and as soon as I click the upgrade button in App Store, it asks for the password of previous apple i.d., which I don't have as I have bought this phone from somebody. There is no option for log out or log in. It there any other way out to upgrade the WhatsApp ????
-
Can anyone put some light on this issue.
When transferring PO idocs from R/3 to the middleware, some idocs doesn't reach the destination due to one buyers address segment not getting populated.
Since this segment contains the address where it needs to to sent is missing, the idocs does not reach the concerned place.
But when the output is repeated, this segment gets filled up and idocs correctly reach the destination
In the program this segment is populated on the following condition.
The address number from the table T001W should match with the address number from the table ADRC..
if sy-sucrc eq 0, the segment gets populated else it does not.
But when the output is repeated in the PO, the sy-sucrc becomes zero again.
I don't understand the connection between when the output is repeated and the above condition.
How the above condition is getting successful when the output is repeated..
Can anyone put some light on this issue.I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Please try activating the datasopurce again and try it.
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
he customer exit is hit before the entries are populated in extraction queue. Actually, when the transaction is done, the changes are written to database table and at the same time into the extraction queue. Just before going to extraction queue, the custom fields get populated in customer exit. -
Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro??
Hi, Can anyone encounter the problem that you couldn't update your apps from Mac book pro??
Currently, my mac can't update any of the software from App store as well as bulit in software like garageband.yeah...
i did that but it didn't work.
Every times, i click on the software updates, software updates dialog box is popping up and
checking for new updates.
After that, acknowledged me whether i want to update or not.
once, i click on "install".
it appears following message.
"A network error has occurred. Check your Internet connection, and then try again."
i totally can access to Internet as i can browser all the websites.
Please help me, is it a "virus" or "malware" causing my mac?.
i just changed a new mac recently and having this problem -
I can not use the property of Touch ID to buy apps from Apple Store. !!!
I can not use the property of Touch ID to buy apps from Apple Store. !!!
Knowing that I have to activate the property of the settings, but they only work when you open the lock and does not work with me to buy the apps in Apple store !!
And I'm sad and very upset by this problem and I bought this phone in order to enjoy this feature and this experience But this did not happen !!Hi I BOSS,
If you are having issues using Touch ID to make purchases from the iTunes Store, you may find the Purchasing section of the following article helpful:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Regards,
- Brenden -
Guys, good evening!
What is the most recently (or the best) iOS for the iphone 3G?
Nowadays, I'm using the 4.2.1, but I'm having some problems to install apps from Apple Store because this iOS is not compatible with the apps.
Thank you very much...Thank You Niel!
And if I install another version (eg 4.3), can I damage my iphone?
This is the version required by the Apple Store when I try to install apps.
For you understand better my problem, I'm not able to install simple apps like facebook and skype
What do you advise me to do?
Best regards,
Jocemar -
i have an ipad2 with software up to date and attempted to buy app from apple store i am gettig this error message
your session has timed out, is anyone to help?Hi..
Try a reset...
Tap Settings > General > Reset > Reset Network Settings
Then restart your iPad.
Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on. -
I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.
Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?
-
I can't install any app from apple store. The install button is not working now. Before it was working perfectly had installed many app and I had purchased many app from i-store
If you installed Leopard that is why you can't install Mt Lion. The system Must be running Snow Leopard 10.6.8 to upgrade to Lion or Mt Lion.
If you only erased the Macintosh HD partition then you left the Mt Lion Recovery HD partition in tact on that system. At startup hold down the Command+r keys to boot to the Recovery HD Partition. From there erase the Macintosh HD partition and then select Reinstall Mac OS X. It should then download Mt Lion and ask you for the Apple ID that was used to purchase Mt Lion.
The Reason Snow Leopard might not be installing is because of the Recovery HD partition. To get rid of that you must First Re-Partition the drive As One Partition. Then install Leopard then SL (Or Snow Leopard from the start) and then update it to 10.6.8. Once that is done you should be able to log on to the Mac App Store and Re-Download Mt Lion. -
I want to initialize my MBpro end reinstall lino, but I purchased it from apple store and cancelled the installation file. If i try to download again it from appstore I couldn't...How I can do ? Please help me
Thanks for the feedback. Now, before installing in, put a copy some place safe and you won't have to download it again, wasting bandwidth, time, and electricity. Why? Because the installer blows itself away during the installation—IMO, a braindead delivery system, copied from their iOS world, but totally unsuitable for computers.
-
I cannot purchase apps from itunes store due to my Apple ID has been disabled. I was trying to reset my ID password, I managed to reset but still unable to purchase apps from itunes store. Any good suggestion to resolve this issue? Thanks
Contact itunes support:
http://www.apple.com/support/itunes -
I have downloaded an app from apple store to my PC and later will syc to my new Iphone4. In meantime, can I and if so how do I open app on PC
If the App is for the iPhone, it cannot be used on the PC...
Only the iPhone...
See Here Apps Store FAQs
http://support.apple.com/kb/HT4461
Maybe you are looking for
-
I have a 2008 iMac which had Leopard initially and I have upgraded to each new OS without a hitch. I downloaded "Mavericks" and began the install, it asked me for my "Admin Password" which I have never ever used since I set the Mac up, I have it safe
-
How can I make the landscape or portrait senser working when playing video
I use MPMoviePlayerController to play the movie. Can I implement it like the method - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation? I know we can set orientation using setOrientation:UIDeviceOrientationPo
-
The App Store is not supported in this country
Hi, everyone I live in Hong Kong, and I bought my Ipad in US. When I click on the App Store. It said "The App Store is not supported in this country' How can I solve this problem? Thx for help =]
-
N95, where is the stop watch gone?
I am missing a very usefull utility I have been useng ever since Nokia phones, it is the stop watch with rounds, spiltts etc... is there an extra aplication arround?
-
Dynamic internal table definition
Hi, I need to define at runtime an internal table. In particular let p_type the parameter to define the type for an internal table DATA: itab TYPE STANDARD TABLE OF p_type WITH HEADER LINE. This code doesn't work. I have tryed t