HT201269 I am trying to activate the blue tooth on my iphone 5 after updating to ios7 and it says it is not compatible to the iMac??  any suggestions

just bought a new imac and i just updated my iphone 5 to ios7.  i am trying to use the bluetooth but the imac says connected and the iphone says the imac is not supported.
Any suggestions on how to resolve this
thanks

Bluetooth pairing of the iDevices to a computer (except for tethering) has NEVER been supported in ANY iOS.

Similar Messages

  • I have an app that is in my update section and it says it is not compatible with the I pad.  How do I get rid of it?

    I have an app that is in my update section and it says it is not compatible with the I pad.  How do I get rid of it?

    Never mind, I just needed to delete the app!  Which I thought I had done it was hiding right in front of my face!

  • My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

    My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

    Hi there Juicy Guava,
    You may find the troubleshooting steps in the article below helpful.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    -Griff W. 

  • I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any suggestions on how to fix this?

    I recently did an apps update and now the update is locked and I have 15 apps I can't open.  Any ideas on what may have caused this and to fix it?

    If Ralph's suggestion doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • Trying to update my itunes and its saying f drive not found

    i have itunes and trying to upgrade it cause i just got 4s, when updating it says f drive not found.  i dont even have a f drive.  please help!

    I'd try the following user tip with that one:
    "Invalid Drive X:\" install errors

  • Cannot access POGO games.Downloaded 6.0 and it says it is not compatible with Java Console 6.0.22, java console 6.0.23 and Norton Toolbar 2010.9.06. Pogo needs the Java Console to run. What version of Firefox can I download to access the pogo games.

    the following is the error message I receive when accessing pogo games:
    The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.

    The Java plugin (Tools > Add-ons > Plugins) is used to run Java applets.<br />
    The Java Console extensions are only needed if you want to check the code for errors and debug Java applets and are not needed for running Java applets as a visitor.
    See also:
    * http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

  • I am trying to update my software and it says I do not have permission?

    How do I get permission to update my software?  I am having trouble with Java on a program and I'd like to do the software update but my computer will not let me.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I can't access the iTunes Store from my iphone 5 after updating to ios7. Why?

    I just updated to ios 7 and now when I choose the iTunes app I get to the store but the screen remains blank and if I do a search, it times out. This is in wifi or celluar.

    You must've blocked cookies. iTunes requires cookies I believe. If you did block it follow these steps:
    Go to settings > safari > block cookies > never.

  • Pages is updating my documents and I can't open them anymore... Any suggestions to fix the problem?

    The app is updating 97 documents, I can't open them and it's been updating for more than 2 hours. I really need these documents, how can I fix the problem?

    Click on the '''Tools''' menu in '''Firefox''' and then click on '''Downloads'''.
    This will bring up the "Downloads" window.
    It should list all of your downloads. You can open each download by double-clicking on it.
    If you still can't open the downloads by double-clicking, try the following:
    In Firefox, click on '''Tools''' and then '''Options'''
    Click the '''General''' tab to find out where your Downloads are going to. It should be listed in the '''Downloads''' section. You might need to click on the '''Browse''' button to find out exactly where they are going.
    Once you know where the downloads are going to, you can go directly to that location and open them from there.
    Hope this helps.

  • How to fix the music appearance in my iphone 4s after updating to iOS7

    The title, album and singer are in just one line. Is the real appearance in iphone 4s music? Because i see in the other, there is two lines for title and singer-album.

    Try giving your iPhone a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, it's rebooting. Once it finishes, try your camera again.

  • BW3.5: Error message when trying to activate the transfer rule

    When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error  in [[  ]]
    Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
    System response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system CI2220 to identify the error, and remove the cause.
    CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
    Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
    Thanks in advance
    Arunabha

    Hi Roberto,
      Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
      Thanks
    ARUN

  • VO Ext- Error ocurred trying to activate the wizard pageAttribute settings

    Hi
    I am new to OAF and working on R12.1.3 vesrion. I am facing an issue while extending standard VO CustomerAccessesVO which is in the path
    /oracle/apps/asn/common/customer/server. My requirement is to add a new column AS_ACCESSES_ALL.SALESFORECE_ROLE_CODE in the extended view.
    This VO uses the entity object CustomerAccessEO(/oracle/apps/asn/common/customer/schema/server) and this entity object extends another EO AccessEO which is having base table AS_ACCESSES_ALL (/oracle/apps/asn/common/schema/server).
    While extending this VO, I only select EO CustomerAccessEO and then I will have the attribute in available attribute list and selected attribute list.
    Available attribute list is having all the attributes which are in EO AccessEO(As CustomerAccessEO is not having any attribute it only extend AccessEO).
    Selected attribute list is having all the attibutes which are present in the query of CustomerAccessesVO.
    Now if I include a new attribute as my new column and even I don't include any new attribute and click on Next button. I got error 'Error ocurred trying to activate the wizard pageAttribute settings' java.lang.NullPointerException.
    Now If I included my new column by adding new attribute and ignore this error I am able to extend this VO and able to get all the file Server.xml, XXCustomerAccessesVO.xml, Voimpl.java, Rowimpl.java.
    But the problem is rowimpl.java file is generated empty.*
    However I substitute this extended VO I am able to see the extended VO in application but that says- No entity object used. No attributes are selected.
    In short my problem is:-
    *1) Getting error 'Error ocurred trying to activate the wizard pageAttribute settings' in Create View Object wizard.
    2) If I ignore error why *rowimpl.java file is generated empty even I checked all the check boxes.
    3) Why I am getting message in application-- No entity object used. No attributes are selected.*
    Please reply as this is have become critical.
    Thanks
    Piyush

    Hi All,
    Problem is still not yet resolved.
    Can any one please look into it.

  • I tried to activate the lost mode ( or lock a device ) to my lost iPhone 4S but un successful , please advise ?

    I tried to activate the lost mode ( or lock a device ) to my lost iPhone 4S but un successful , please advise ?

    the device needs to be connected to the Internet before it works

  • When Iam trying to activate the update rules

    Dear One's......!
    When Iam trying to activate the update rules Iam getting the error message as "Data fields already updated for InfoSource T_T07_O005 with MOVE"
    Can any one kindly update me on the same?
    Thanks in advance,
    Raj

    Hi,
    this is not a error message but just a hint, a information, that you already have update rules from another infosource updating the same target which are updating the same fields. Just press enter and continue with activating.
    regards
    Siggi

  • While trying to activat the purchasing data source in LBWE I'm getting erro

    Hi,
                  .while trying to activate the purchasing data 2lis_02_scl source in LBWE Iu2019m getting following error msg.
    'Client XXX has status is not modifible'
    Regards,
    devi,

    Hi,
    The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
    1)WorkBench Request & 2) Customizing Request.
    Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
    Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
    Refer this links http://www.allinterview.com/showanswers/57910.html
    customising and workbench request
    Difference between Customizing request and Workbench request
    Thanks,

Maybe you are looking for

  • SUM for a field in ALV

    Hello Guys, CAn any one tell me how to do the SUM for a particular column in ALV.It should display at the End of the records.The column field is TYPE N(4). My CODE is like this: CLEAR fc_tmp.   fc_tmp-col_pos         =  5.   fc_tmp-reptext_ddic    =

  • I Can No Longer Switch My Camera to Video Mode

    After my ipad had a new update recently, I can no longer switch my camera from camera to video mode. I lost all of my pictures and videoes as well. How can I get them back and have my camera working like before? It does switch from back to front, but

  • Can't zoom in or out on some pages. Help?

    I tried pinch zooming and double tap zooming, none of it works. Zooming in and out do work on certain sites though. I was able to pinch zoom in all sites, but now I can only pinch zoom on certain ones.

  • Overdelivery in intra-company stock transport order

    Hello, I have the following scenario - I have two plants, 1000 and 2000, both under the same company code. I transfer 450KG of material 123456 from plant 1000 using STO with SD (mvt. type 641), material is packed in HUs. In the receiving plant, the H

  • Reference documents type

    Hi,     Is there any transaction or table where i can find refrence document types associated with a document type(in this case CB-charge back) ,which has references to document types DG-Customer Credit Memos and DZ-Customer Payments?.This is FIAR li