HT201269 I can't make any calls from my new phone

I just got my phone on warranty, and my carrier is not showing on the top right screen. Help me

I assume you put a SIM card in your replacement phone.  If so, youll need to contact your carrier.

Similar Messages

  • HT5176 How can I make a call from my new iPad(3rd generation) with wifi+4G

    How can we make a call from iPad 3rd generation with wifi+4G?

    You cant "Call" anyone. Its not a phone. You can facetime other IOS users. Setup facetime with your apple id in ipad settings/facetime. You can also download apps like skype in the app store.

  • Can't make a call from my I phone Always say call failed

    Hello
    i have a problem with my I phone that it new phone and i didn't use it until now but i have a problem with it that i can't make a call always say call failed , i changed the sim card but i still have the same problem .
    so can you please help me

    First try resetting your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

  • Can't make any calls from my Skype account to land...

    I have had this problem for 2 years. I cannot call a phone from my Skype account. I have credit on my account and even topped up again today but still I can't make calls. The screen comes up as if it is about to make a call but it just says contacting and nothing happens.....i have tried using several devices but same result....highly frustrating and Skype support is very poor!!!!can anyone help me ?

    Richardmadden. wrote:
    I have had this problem for 2 years. I cannot call a phone from my Skype account. I have credit on my account and even topped up again today but still I can't make calls.
    Hello and welcome to the Skype Community!
    The reason you can't make calls is because you are calling from the UAE which blocks all outbound VoIP traffic including Skype to protect the state monopoly. Accessing the internet using a VPN to avoid the block may assist.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • I can't make any calls after changeling my number?

    I Can't make any calls out of my phone after changing my number? Can anyone help me with that

        DanMoon35 No need to panic! I am sure we can get your calls working again. What make and model phone are you using? Have you tried to restart the device?
    SheritaH_VZW
    Follow us on Twitter
    @VZWSupport

  • How Can I make redirect caller from agent to any branch IVR?

    I have IPCC Enterprise Edition (ICM 5.0, IVR 3.1)
    How can I make redirect caller from agent to chosen branch IVR, and send with call any variable to IVR (e.g. account number).
    Regards
    Krzysztof

    I would suggest that post-routing should not be used. The way to go is to use translation routing applications. Although post-routing is easy to set up, almost all deployments require translation routing. I can't think of anything good to say about post routing, other than it's trivial to configure.
    You want the main route point to be on the CM_PIM.RC for a number of reasons. You can check to see which of your IVRs are on line, and/or to do load balancing. If calls don't need to go to the IVR if agents are ready, you can have an LAA Select node immediately, and then translation route. Even if you just have one IVR, translation routing will enable you to do RONA more easily.
    You need to bite the bullet and learn translation routing. If you do it that way, peripheral variables attached to the call remain unaffected whether the call is under the control of the CM_PIM.RC or the IVR_PIM.RC. This is exactly what you want.
    There is no need, in my opinion, to go to an external database. In your IVR, decisions made by the caller (e.g. which "skill" they want) set peripheral variables. When the call comes out of this script you check the peripheral variable, and depending on the value do a queue to the appropriate skill group and run external script (BasicQ.aef).
    Separate the intelligence gathering IVR script from the Queuing script. Allow ICM to make the routing decisions.

  • How can I make a call from iPad

    How can I make a call from IPad

    Oh, you have to get the iPhone app.
    Seriously, though .... you are aware that it's not a telephone, right? Any calls you make will be using VOIP and any of the apps and/or services (Skype, Google Talk, etc., etc.) which support that. Some of those are US-only, all have various restrictions and cost structures.

  • I can't make any call

    Subscription is activated in my account but I can't make any call. How canit will be solved.

    Try a Battery Pull:
    1. Remove the battery while phone is turned on
    2. Wait a few seconds before inserting it again
    3. Allow the long boot up process to finish (takes a few minutes usually)
    This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://store.berryreview.com/product.asp?id=27660&n=QuickPull-Free
    A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
    Under Options>Mobile Network, check the settings there. You may be roaming and hence your data services could be "Off when roaming" and  your network selection mode could be set to "Home only". Change these and it may work.
    Other than that, I would suggest talking to your service provider since this may be an issue at their end.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Can't make any calls. Can receive calls, sms data etc just fine

    Hi,
    All of a sudden this mid-morning, I wasn't able to make any calls from my iPhone 4S.
    Everything else works fine. was able to make calls earlier in the morning too.
    Have tried:
    - turning it on and off
    - soft reset
    - turning airplane mode on and off
    - checking caller ID
    - resetting network settings
    nothing works.
    Please let me know what else I can try.
    Signal is good, when I receive calls, voice are crystal clear.
    Phone is provided from my company, so no problem with payments i think.
    updated to ios 5.1.1 last week.

    Check to make sure you haven't accidently turned "Airplane Mode" on. If that's not on, try syncing and backing up your phone and doing a complete reset and sync everything back onto your phone. If all else fails, contact your phone company. Good Luck.

  • Can i make cellure call from ipad

    Can i make cellular call from my ipad

    No, you can't.
    But you can call by Voip apps - not only Skype, but also Viber, Rebtel, Truphone, Smartgroschen, Nimbuzz and Fring.
    Some of these apps gives you free top up (for example Smartgroschen: 0,50 EUR) at start so you can test it without any costs!

  • Can't make any call though enough skype credit

    I have paid for skype credit, and I have only called once.I checked my account, and was sure there is some money left.However, I can not make any calls afterwards.It always hung up as soon as I made the call.It showed "blocked"How can I fix it?

    Hi and welcome to the Skype Community,
    Please sign in to your Skype web account page at www.skype.com/go/myaccount - Within the "Usage" section you can find information about your calls and call attempts. Could be the number you tried calling is blocked for calls from Skype. Can you share what type of number this is?

  • I'm trying to activate my new 4S and I can't make any calls -it says "No Service" What am I doing wrong?

    I followed all the prompts and plugged my new 4S into my desktop, everything has sync'd but I still can't make any calls. It's obviously not connecting to the network. What am i doing wrong?

    Do you have a SIM in the iPhone?

  • Can't make any purchase from the AppStore even if it is free ,

    Hey There
    Can't make any purchase from the AppStore even if it is free ,It always tells me error has occurred. This happens since I upgraded to Mavericks,, Could you please help

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I am facing problem in using viber...can not receive  any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls

    I am facing problem in using viber...can not receive  any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls whn my phone is locked even as i can receive calls on HTC

    Hi,
    This is an official representative of Viber Media.
    Unfortunately we cannot change this feature due to Apple's restrictions. :/
    For more questions or technical support, please visit our official HelpDesk.
    Thanks,
    Viber

  • I recieve phone call from my iphone on my mac  but i can not make a call from my mac

    I recieve phone call from my iphone but i can not make a call from my mac What shall ido

    Then follow the steps here:
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    But basically make sure that iCloud is enabled with the same account in both your Mac and iPhone, turn off Wi-Fi calls if enabled in your iPhone and make sure that Facetime has the same accounts in your devices.

Maybe you are looking for

  • Mini display port to VGA not showing correctly on TV

    I have a new 2012 (June) MacBookPro running 10.7.4 with a 2.5 GHz Intel i5 processor. Graphics  Intel HD Graphics 4000 512 MB. I'm trying to connect a Toshiba flat screen TV to the computer via a mini display port to VGA adapter purchased from Apple

  • Metrics when redistributing a static default route into EIGRP?

    I saw a network working with EIGRP and resdistributing a static default route into it. I did not find the "default metrics" to redistribute into EIGRP but the static default route works and is redistributed. My understanding was that everytime you re

  • My iPod Touch won't sync unless I restore.

    Every time I try to sync my iPod it fails to sync because of an "unknown error." It will sync if I restore it, but as you can imagine its incredibly frustrating to have to restore it every time i want to ad a new song. Can anyone help? Thanks.

  • Getting "Document Dimensions" Readout to Stick

    I like to set the little status area at the bottom left of my image window to "Document Dimensions", because I like to watch the pixel count. It will stay like this during my editing session once I set it. Unfortunately whenever I go to look at the t

  • Remove CS2 before installing CS4?

    I have been using CS2 for all of my work and would like to keep using it as I transition to CS4 Design Premium. I won't have a lot of down-time. Can I install CS4 suite on my hard drive while leaving my CS2 apps untouched? 1.8 PPC G5 10.4.11 1.25 GB