HT201269 i have 4s used one and i been using it since a while ago and use my i cloud on it but when i upgrade
i have 4s used one and i been using it since a while ago and i cloud was working fine but when i upgrade it was asking me for the previse user i cloud ? what should i do
Looks like its fixed. I am syncing it now. A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well. My old phone is now an 8 gig ipod. the books app no longer works and that *****.....but better than nothing...
Similar Messages
-
MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable! Rarely used and out of warranty, what a rip off!! I have been on MACS since the 80's and things are getting more and more difficult to deal with. Why did it quit after barely being used? Any help from Apple?
It depends on what you mean by "barely one year old". If the iMac is only a couple of days out of warranty, Apple's been known to make exceptions and extend the warranty, though it's by no means guaranteed. If it's several days or more out of warranty, then Apple will fix it, if it's a hardware problem, but the repair won't be free. This is no different now then it would have been with a Mac purchased back in the 80s.
Why the drive failed, if indeed it has, is impossible to say. Could have been a static shock, a weak component that failed when power was applied, or a mechanical fault in one of the tiny parts used in optical drives and hard drives that finally broke.
Regards. -
I have had FPCX since Sept, first used Oct. I have not had one 'movie' export properly, first time since using FPCX. Audio stops completely at some point and does not re-start. Any ideas, folks?
First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
You could also list any relevant error messages you encounter.
What version of FCP X are you using?
All these things will make it easier for people to help you.
Andy -
I Have followed all the steps and still cant remove iCloud to my existing account and add to the new one, the old email account was changed a year ago and cant get that email plus the password don't work please HELP!
Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
I can only purchase in the US app store however I live in the UAE, the problem is I bought an iTunes gift card quite while ago and to use that I had to have an Apple ID in the US app store, so I changed my region to the United States but now I have $0.76 in my account and it doesn't let me to change my region before using that amount of credit and there is no any app which costs $0.76 and I want to change back my region to the United Arab Emirates.
Please help me!Click here and ask the iTunes Store staff to zero your account balance.
(93247) -
I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.
Hi...
Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund > Apple - Support - Mac App Store - Contact Support.
No guarantees. -
I cannot uninstall or install itunes. error is 'trying to use on a network resource that is unavailable'. I cannot find path to any folders containing installation package itunes.msi. Unable to download itunes since 2 updates ago and crashed computer. Windows update as suggested in some posts does not assist either.
Can anyone assist me? Thank you so muchShould the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.
Use another browser.
Mylenium -
i accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?
Howdid you buy iPhoto originally? Did it come preinstalled on a new macwith MacOS X 10.7 or later? Then you can download it from the Purchased tab of the AppStore:
See: OS X: About OS X Recovery
Restoring iLife applications after Internet Restore of OS X
If your computer came with OS X Lion or later and you erase your hard disk and install OS X, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
Choose App Store from the Apple menu.
Enter your Apple ID and password when prompted.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your computer. Your account will not be charged for them. Click Install to complete installation of your applications.
If your Mac came with an earlier system, reinstall iPhoto from the bundled application installation disk.
And if you bought an iLife disk, use that to reinstall. -
I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.
Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout
-
I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.
Morning Clementine Lin,
For more information this, please see this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
Have a nice day,
Mario -
Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.
No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hi, I used the Image Processor feature to resize and save in a separate folder all the time in Bridge CS3. I recently upgraded to CS4 and I can't get the Image Processor to work. When I select the feature, it opens photoshop but nothing happens...it
-
Adobe Media Encoder Fails Midway Through Encode, But Says File Was Successfully Encoded
When I send a sequence from Premiere Pro to the AME queue and then start the queue, the encode runs through about a third to half of the sequence and then fails. However, AME says the encode is complete, and gives it a green check mark in the list. T
-
Subject: Choice element in JAXB 1.x
Recently i ran into problem of having too many elements in choice tag. JAXB doesn't throw exception, but generated files doesn't comply Java. While compilation it throws "code too large" exception. On removing few i can manage, but i am looking for l
-
Call an executable after Installing an application.
Hi.. I am using Labview 7.1 application builder to build my application. In that one, one option is there to call one more executable after installing this application.(Installer settings/Advanced/Run after installation). But I am trying to call one
-
Greetings, I have been testing a small java applet for a phpbb mod, named Proxy Revealer Basically the java applet "phones home" (connects back to the http host serving the applet) via a Socket connection to establish a direct connection, then basica