HT201269 problem transferring music - replaced 4S with same model

my music did not dowload to my new phone when I used itunes to transfer the to replacement phone i was sent. how do you fix this? where did the music go and how do you download it?

Hello, LIGirl12.
Thank you for the question. The first thing you want to do is check your music library in iTunes to see if your media is present. If this media is there, then you can sync it back to the device. I have attached an article that shows you how to syncing this media to your iPhone. If the media is not present, you can download any past purchases to the computer by following the second article below.
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Hope this helps,
Jason H.

Similar Messages

No sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem.

no sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem. No sounds coming out from the speakers, even after reset everything. Mute button is assigned for mute function instead of screen rotation lock.

Hi herbie13!
It sounds like you will still want to link your iPad and computer, but you want to prevent the iPad from syncing information from your computer to your iPad. I have an article here for you that can help tell you how to set this up:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386
You will want to follow the steps here to set up the iPad for syncing, but when it comes time to sync, you'll just want to make sure that the boxes for syncing the multitude of items that you can sync remain unchecked so that none of that information gets synced into the iPad.
Another note: your second Apple ID will not be able to access the apps, music, movies, tv shows, etc., that you have purchased under your primary Apple ID. Even though it seems that the secondary Apple ID still has access to those items, that is just because you are viewing your second Apple ID through the iTunes Store section on your computer and you have those items saved locally on your computer. You will need to repurchase and download all of the content that you wish to use again on your second Apple ID, if that is what you wish to solely use on this iPad.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Problem Transfereing Music. Computer Freezes.

Hi there. Just got a new Ipod and I am haveing problems transferring music to it. I installed Itunes and loaded all my music into it. My problem comes whenever I try and transfer my music to the Ipod. As soon as I try and transfer it the computer basically goes into hibernation mode and won't come out without restarting the computer.
Anyone else had this problem?

thanks - all other usb devices are disconnected. I tried to run the error check on the ipod, but when I click "start" (on the tools tab) that screen just goes away & doesn't seem to be doing anything.

Advice for transferring files to computer with same title nam

Hello, I'm looking to purchase a new creative player and i need to thiink about how to transfer my music from my old player to the new one. I assume i would have to transfer music to my computer then from there to the new player. However i tried transferring songs to my computer a while ago and remembered having problems with songs which had the same song title as others. I think these songs were completely removed. Has anyone had the same problem or know what i can do to avoid problems transferring songs when the title is the same. Guess it would be easier to make sure all song titles are unique, i know! Also what is th ebest software to transfer music to PC

Answering my own question!
Experimentation has showed me the video kind doesn't change when I transfer the files over my iDisk. So, I'm assuming something in the burning to CD process changed the Video Kind. Problem solved, if not the "why." I'll report it to Apple as a minor reproducible bug.
I was going to delete my original message, but then it occured to me to leave it up if anyone has the same question. So, here you go.

Problem transfering music onto 6280

Hi,
I am looking for any help with this issue, I am about to throw my phone in the bin!!
I am transfering music via my pc, when i get about 5 songs into ANY cd, the programme (nokia pc suite, latest version) says it has encountered an error and must shut down, this is not isolated it is any cd I try!
I am using a 1 gig memory card and therefore know I have plenty of space,I have tried different conversions and different rates of conversion!
I am at the end of the line with this flippin' phone......any advice would be gratefully recieved.

Just what do you mean by "First I uploaded the music from a flash drive into his cloud"? What did you do?
To sync see:
iTunes: Syncing media content to iOS devices and iPod
Note that you can only sync with one iTunes library/computer.

Agent install with replacement machine with same name

we replace old workstations with new ones with same name, SCCM does not update, it still shows the machine with an active agent, but it never gets installed on the new machine. what do I need to do to get the agent on the new machines?
Pat

Hi,
If you are trying to use autimatic client push it will not install the client that scenario as the computername is already active in SCCM. You could use a startup script in a GPO to always make sure that the client is installed on all computers, Jason Sandys
has written a great one, you can find it here..
http://blog.configmgrftw.com/configmgr-client-startup-script/
In the scenario above you also risk getting a duplicate in SCCM as the new computer with the old name has new hardware.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Having problems transferring music from my pc

I bought an ipad 3 last week and seem to be having difficulties transferring music from my pc. Do I click import, this seem to work but only transferred 2 1/2 albums & podcasts.

Tried a disk clean up and even upgraded the firmware on my player.
Now in nomad explorer the music files do not even show up while the data library still take ages to load and I still cant transfer anything from it as it tells it cannot read from jukebox device.
Tried deleting some files to see what would happen ? the file says it has been deleted but when I disconnected and looked in library again the file was still there.
I forgot to mention in my first post that I was able to transfer everything off my Zen onto pc but I had to remaster my computer and as such lost all files and since then I cant transfer off the Zen - not sure if that matters but thought I should mention it
Can?t really test at friends? computer because even if I could and it worked I have 25 GB of files that need to be transferred which doesn?t make it feasible to transfer all onto a friend?s computer
Any help is grateful as I need to back up my music files in case my Zen breaks down (I am on my third Zen in 4 months as the first two were defecti've)

Problems transferring music with USB 2.0

I recently installed a USB 2.0 PCI card with 4 ports, the card installed fine and plugging my Nano into it was fine, however, when I try to transfer music onto the Nano it keeps freezing. It'll transfer maybe the first 2 or 3 tracks of an album and then stop. Clicking on 'Update iPod' means it'll do perhaps another 2 tracks and then it'll freeze again. I have to keep clicking on 'Update iPod' to eventually get all the songs moved over - it kinda defeats the object of using USB 2.0!!!
I'm running SP 2 so thats not the problem and everything else that's connected to the new ports are running fine. Any ideas...anyone...please??!!

Hi,
what you could try is to reinstall the chipset driver because I think the USB is related to the chipset.
In my opinion the upgraded Windows had changed the USB driver from Toshiba one to MS one. So the Port replicator is not recognized all times.
Bye Rudi

Problems transferring music from turntable to computer with Audigy 2ZS Plse He

I originally had Sound Blaster PC28. I have installed last year Audigy 2ZS with 6 analog plugs and updated regularly. Everything is fine from burning to playing music of any format allowed. However, last week I tried to transfer vinyl music to my computer using Sony Sound Forge Version 8 and nothing works. Here's what I did. Luxman Turntable connected with ground to LINE IN ( in DENON amp ) and in the AUX output I have 2 Monster cables boing to my computer twinned on goldplaited /8 jack which is connected to the second (from right) LINE IN in the sound card. This done while referring to Manual & Getting Started Demo Creative program in the software. NO SOUND AT ALL COMES IN the computer - while the music is playing qell on my audio system player. I've done all kind of adjustment with the Microsoft Volume Play & Recording Controls and with Creative Mixer.
I can only distinguish on Sony Sound Forge two volume bars that there is some faint connection fluttering . I still tried to record but upon playback, there is no visual waving lines illustrated in SoundForge window nor sound played back. I expected that. What am I doing wrong or is Audigy 2ZS not suitable for such ? FYI, I tried the other5 jacks on the sound car ( adjusting to WHAT U HEAR or LINE IN controls ) .
The infos in Creative manual and software demo show the 2nd jack of analog sound card from the right being used as a LINE IN for cassette, synthesizer & cd player ( Iguess it goes also for truntable ? - i tried with cd player and it does not work either ) Third jack from the right is only for microphone (also tried but does not work either) . Sorry for lenghty description, I tried all I could . Am retired 7 yrs old and i wish to transfer all my jazz vinyls to puter inorder to make cds. Kindest to All for your help. Merci beaucoup !

nighthawk7jazz wrote:
I originally had Sound Blaster PC28. I have installed last year Audigy 2ZS with 6 analog plugs and updated regularly.
Everything is fine from burning to playing music of any format allowed.
However, last week I tried to transfer vinyl music to my computer using Sony Sound Forge Version 8 and nothing works. Here's what I did.
- Luxman Turntable connected with ground to LINE IN ( in DENON amp ) and
- in the AUX output I have 2 Monster cables boing to my computer twinned on goldplaited /8 jack which is connected to the second (from right) LINE IN in the sound card.
This done while referring to Manual & Getting Started Demo Creative program in the software. NO SOUND AT ALL COMES IN the computer - while the music is playing qell on my audio system player.
I've done all kind of adjustment with the Microsoft Volume Play & Recording Controls and with Creative Mixer.
I can only distinguish on Sony Sound Forge two volume bars that there is some faint connection fluttering . I still tried to record but upon playback, there is no visual waving lines illustrated in SoundForge window nor sound played back. I expected that.
What am I doing wrong or is Audigy 2ZS not suitable for such ? FYI, I tried the other5 jacks on the sound car ( adjusting to WHAT U HEAR or LINE IN controls ) .
The infos in Creative manual and software demo show the 2nd jack of analog sound card from the right being used as a LINE IN for cassette, synthesizer & cd player ( Iguess it goes also for truntable ? - i tried with cd player and it does not work either )
Third jack from the right is only for microphone (also tried but does not work either).
Sorry for lenghty description, I tried all I could . Am retired 7 yrs old and i wish to transfer all my jazz vinyls to puter inorder to make cds. Kindest to All for your help. Merci beaucoup !
Connections:
Turntable_(out)-->(in)_[Denon phono input w/ RIAA preamp]_(out)-->(in)_[Audigy Line-In (see the user's guide)]
(if you want to play back through Denon amp, --> [Audigy line-out [_(out)-->(in)_[Denon line-in (playback or aux-in)].
Software settings:
Creative CT Mixer
- enable Wave and Line-In sources, set level to 50-00%
- set .Rec source to AnalogMix(), set level to 50-00%
- find the best levels (I normally have these set as: line-in = 70% (.rec = 00% if not using ASIO drivers))
SoundForge:
- (depending on device driver mode you're using and which A2ZS model you have there), set input to AnalogMix() (w/ ASIO) or just select the one meant for Line-In,
- set recording levels
jutapaMessage Edited by jutapa on 08-29-2006 09:4 AM

Zen Touch 40 GB: problems transferring music files and playli

Hi,
Creative Zen Touch 40 GB, one year old<
[color="#330000">PlaysForSure Firmware 2..0<
Creative MediaSource Organizer 5.0.38<
Creative?Sync Manager 5.0.9.0<
Windows XP Service Pack 2<
527?music (.wma) files on the player; 4205 MB of free space<
I'm finding it increasingly difficult to?transfer music files and playlists to my Zen Touch player now that the amount of free space on it has fallen below 5 GB. More often than not, it's necessary to put the player into Recovery mode, perform a clean-up, and then reboot and rebuild the library before Sync Manager works properly. I often need to repeat this process several times before I can transfer anything. Increasingly, too, Windows fails to detect the presence of the player when I connect it to my computer. Rebooting both the player and the computer usually fixes this issue. Transferring files by dragging and dropping in Windows Explorer is obviously much quicker than using Sync Manager, but here again I keep running into problems. It's as if the player freezes and refuses to take on-board any more files. Also, I can't find a way to transfer playlists except with Sync Manager. Are these known problems? I recalling running into similar issues with the Zen Touch 20 GB a few years ago. And could the fact that I'm doggedly using an old (998) and underpowered computer be an issue? I'm thinking of replacing the computer anyway, but is it likely that these synchronization problems would diminish or disappear altogether if I were to upgrade to something speedier?Thanks for any insights,Pete

I too have a simular problems! Managing music is the biggest problem with over 0 Gigs. Some artists songs sometimes change name titles, artists,?and etc. Win Explorer is most used by me now. Yes, I do lose sync from time to time! Especially when I open two windows on the portable zen. There are two tools that need. . Playlist management - it takes too long to do it on the player. I want to create "Gym Vibes" and had it on my old creative?Nomad player, but couldn't transfer. "Creative Sync Manager" doesn't do it!?Without all that sync stuff how can I create and edit creative's playlist on a PC?2. A method for detecting dupicates?This is my second creative portable and if I don't get the tools I won't buy another!

Problem transfering music to Nokia 5000

Greetings,
Using Nokia PC Suite version 7.0.9.2 under Windows Vista Ultimate, 64-bit, using Bluetooth connection to my Nokia 5000.
I'm trying to transfer music files to the phone using Nokia Music Manager. I'm unable to play any transferred files in my phone - whenever I try, I'm getting "File corrupted" message. The converted files (to AAC format) play fine in Music Manager itself. Also, if I transfer the original MP3 files directly using file transfer, they play fine in the phone.
The same problem also existed with the previous version of Nokia PC Suite (I think that was 7.0.8.2).
Regards,
Dimitri

I have N73 Music Edition
lol. Easier way to do it follow this advise...
1. Connect N73 Via USB
2. Select Mass Storage Mode
3. Copy & Paste all your music tracks into ur Mem Card via Mass Storage Mode.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

Having problems transfering music to my Nano between laptop and desktop.

Recently my desk top PC broke down. I then got a Nano for my birthday (cool) so bought some podcasts and tracks from i-store and downloaded a small proportion of my cd collection using my laptop. For some reason it takes a couple of hours to download a cd into i-tunes. For that reason, now my PC is back with me I downloaded the rest of my cd collection onto the hard drive then transfered the music into the recently installed i-tunes.
Here's the problem, when I connected the nano to the PC for the first time I was asked if I wanted to replace the present library (laptop) with the new PC library. I want both as I don't see how to get the bought and paid for stuff off the laptop, onto my PC and then on to the Nano.
I can understand why this may of happened as you could just plug your i-pod/nano etc into someone elses laptop and bootleg their music but I don't want to have tp pay for my downloads twice. Can anyone help me out?

your iphone can only synce with one pc at a time, but when you want to add songs to your iphone for another pc, and you don't want to lose the data that you already have,
1- on your music store creat a new list(on your iphone)
2-press synce
3- the songs that are on the pc, drag them to the play list you created and synce.
that is what i always do

Transferring Music Between Computers With Ipod (Very Unique Situation)

My Ipod has about 300+ songs on it that aren't on my old desktop (Windows)and I would like to know if I can get those 300 songs off the Ipod and onto my new MacBook Pro. I looked at the tutorial for how to do this and I saw two problems I would need to address. The first is the guide says something about not being able to move the files from a PC to a Mac and the second is it talks about updating the files on the ipod which I can't do since the files I want to find aren't on there. Can I move these files without updating the Ipod? Oh and by the way I moved all the other files over to the MacBook.

There's a manual method of copying songs from your iPod to your Mac at this link: Two-way Street: Moving Music Off the iPod
If you prefer something more automated there are also a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but check the others out and choose whichever you are happy with.
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
iPod.iTunes Mac Only
PodView Mac Only
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
There is also a new function in iTunes 7 under File, "Transfer Purchases from iPod" which transfers iTMS purchases. A paragraph on it has been added to this article: How to use your iPod to move your music to a new computer
If your iPod is set to update automatically take care when connecting to your MacBook and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod will appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

Problem transfering music from itunes to iphone

Hi! Wondering if you could help: I can play in Itunes the music I download. But when i decide to transfer these songs from Itunes to my Iphone 4 by draging it, like I always did before, it doesn't work. By the way I just bought a new laptop and downloaded Itunes on it. Can someone tell me what could be the problem?

hi, your message is kind of old and you've probably already figured out how to transfer the music. i just read some of the replies to you and see that no one mentions the "Autofill" option so i wanted to let you know--just in case it might help you to do things a bit less complicated. i had the same problem with the new version of iTunes (11.0) and discovered the best way to transfer your music is to add it to your iTunes library like you usually do and click on the "Autofill" button at the bottom so the music is transferred without problems. You still won't get to keep your playlists (I know right? ******* genius whoever came up with this brilliant idea...) and you must make sure you're "auto-filling" the music from the recently added list, otherwise it will just transfer music from a different location.
i hope this helps! you can email me or PM me if you've got any other questions!

Problem transfering music/updating ipod

I recently moved and changed computers. My ipod had my library from home on it but i had a new library at my apt. i plugged my ipod in to see what kind of transfer there would be and it erased my ipod and filled it with the new library. then i went back home, and reversed it with my old library. finally, i had enough at my apt so once more i erased my ipod and built it with the library from my computer. today i tried to traditionally transfer music, adding music into my ipod. it would not update, it said it was finished updating but when i looked, none of the new songs were transfered into my ipod.... please help im so frustrated. ive tried reinstalling but that doesn't solve the problem.

Welcome to Apple Discussions!
What you are trying to do is illegal. You cannot take your friend's music. That is one of the reasons for the message.
Also, even if legal, you cannot use iTunes to move music from iPod to computer.
btabz

HT201269 problem transferring music - replaced 4S with same model

Similar Messages

Maybe you are looking for