HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

@ melfromvictoria
Have you tried right clicking on the 4s and select "restore from back up"

Similar Messages

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

Error while replicating employees from R/3 to CRM. BP no. are not created

CRM Experts,
Request your help in solving the following issue.
While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
Message:
IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
Immediately processing not possible: Screen output without connection to user.
Steps:
1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
3. The BP number is not getting generated.
Really appreciate your solutions/suggestions/clues.
Thanks in advance,
Vijay

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Downloading data from internal table to xls file leading zeros are not disp

Hai abap gurus,
when i am downloading data from internal table to excle file. some field values in a column are with leading zeros and some others dont have leading zeros.but in the output it is showing without leading zeros. then how to get with exact values.
Ex:
ECC Code.
045234
88567
098456
but output is giving like this:
45234
88567
98456
how to get the actual values.....
plz help me in this matter.

Dear Kiran,
Those field in the internal table having Leading Zeroes, make those fields' datatype as character.
Then use the function module to download the content of the internal table to the excel file.
Regards,
Abir
Don't forget to Reward Points *

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Dump while downloading data from Application Server File in 4.6 system

Hi,
When we are trying to upload data from Application Server to internal table using dataset statements, it is resulting in a dump. System we are using is 4.6c.
When we faced similar kind of issue in ECC version, we have used the statement, Ignoring Conversion Errors.
Please let me know how to handle this situation in 4.6 System.
Thanks for your inputs.
Regards,
Phani

Hi All,
I am sorry. My question was wrong. It should be while uploading data from internal table to application server, if there are any special characters, it is going to dump.
I will let you know the dump details and code at the earliesst.
Sorry and Thanks again for your prompt response.
Regards,
Phani.

I hate it i am fed up it so diffiuclt Why they make it so difficult with transferring photos contacts data from iphone 5s to pc .!!!!!!!!!!!!!!!!!!!!!!!!!!!

i hate it i am fed up it so diffiuclt Why they make it so difficult with transferring photos contacts data from iphone 5s to pc .!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hook the phone to the computer, open the Computer icon and look for the iPhone folder. Copy the images. Not difficult at all. Sync your contacts with Outlook through iTunes. Not really so difficult.

"...an error occurred while sending data from the iPhone" - caused by latest iPhone update today?

I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve Callender

Tried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve

I want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

Welcome to the Apple Community.
You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How can I transfer the data from iPhone 3 to iPhone 5?

How can I transfer the data from iPhone 3 to iPhone 5?

Sometimes you might get an error while restoring if the ios version used on 3 is outdated.
But other wise please follow the article
Transfering data

HT1766 I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

If on a Mac, and you elected to save such to your Keychain, you can recover it from your Keychain. Otherwise, you can't.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups & restore the phone as a new device. Your data will be unrecoverable.

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Deleted data from iphone thanks to itunes synchronisation

Yesterday, without realising it, I synchronised my iphone (thanks to this automatic synchronisation service offered as a default on itunes, grrrr) to my husband's itunes account which had NOTHING on it. I have now lost everything on my iphone, including apps, photos, purchased itunes, saved contacts, everything. The setting on the iphone has gone back to basics. Can someone please tell me if there is a way for me to recover everything that itunes deleted from my iphone? I have searched through itunes and my iphone, and there is nothing that specifically answers the issue of accidentally deleting data from iphone due to itunes synchronisation. HELP!

In regards to iTunes content, an iPhone can be synced with an iTunes library on a single computer only, and photos can be transferred via the iTunes sync/transfer process from a single computer only.
Even with iTunes set to sync an iPod or iPhone automatically when connected, when connecting an iPhone to iTunes on a different computer than is used to sync with the iPhone, a warning message is provided along with a warning message that all iTunes content on the iPhone will be erased first, which must be approved.
Contacts on your iPhone are not touched unless you select to sync contacts with a supported address book application on the computer which is selected under the Info tab for the iPhone sync preferences with iTunes, which is not selected automatically.
3rd party apps can be downloaded again with iTunes on a computer that is logged in with your iTunes account or with your iPhone and you won't be charged again for a purchased app as long as you use the same iTunes account to download the app that was used to purchase the app originally, but not the same with music, which can be downloaded once.

HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

Similar Messages

Maybe you are looking for