HT201270 Frozen Screen and no on/off buttom capability

I have a 4s and my on/off button stopped working about 6 months ago and now today my screen froze and I cannot do anything.  Any help?

Hi jlamppa,
If the sleep/wake button your your iPhone has stopped working completely and that is preventing you from resetting your device now that it is not responding, you may need hardware service. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

Similar Messages

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • IPad has frozen screen, can't turn off?

    iPad has frozen screen, can't turn off?
    had multi-tasking gesture feature on and was trying to zoon out of a picture.
    Help!!  Thanks  : 0

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I accidentally broke my iPhone4S screen and its out off warrantee.

    I accidentally broke my iPhone4S screen and its out off warrantee. Where can I change it and how much do I have to pay?

    SEARCH!!!
    http://lmgtfy.com/?q=iphone+parts

  • Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

    Just installing a few updates from the Mac App Store for mountain lion on my 2010 MacBook Pro, during this it made a noise and then the screen and keyboard went off, like it is off. What happened, is it off...or should I just wait it out?

    What kind of noise?
    The only things I can think of that make noise are fans and disks. Fans usually will not cause the computer to shutdown as you describe. My guess is your disk drive died. I hope you made a backup prior to start the ungrade.
    Allan

  • My iphone 4 got stuck while software update and now it keeps show the apple screen and then shut off

    Hey everyone!
    My iphone 4 got stuck while I was doing the software update to iOS 6.3.1 without using the computer (directly from the iphone settings) and now it keeps show me the apple screen and then shut off. I really don't know that to do and I would like some help, please!
    thank you very much.

    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • HT4904 I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

    I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

    Booting From An OS X Installer Disc
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.

  • Downloading app seems to have crashed ,now have striped screen and wont turn off, tried the 2 button10sec trick but still nothing dturn off, tried the 2 button 10secill not turn off tried the 10sec two button trick still not working any suggestions please

    while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?

    Try here:
    iOS: Not responding or does not turn on
    If not successful, let the battery fully drain. Then charge for an hour and try again.

  • TS2570 when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    Hi , and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Hold alt or option key at bootup, do asny boot choices show up?

  • HT201401 my iphone has a frozen screen and it does not turn off to reset.  what do I do?

    My iphone has a frozen screen. It will not turn off to reset.  What can I do?

    Press and hold the Home and Power buttons for 15-20 seconds until the white Apple logo appears to reset the device.

  • Xorg / catalyst / kernel upgrade - Frozen screen and input [SOLVED]

    I knew it, never upgrade xorg/graphic drivers when using ATI cards, just bless your god when it works and never touch it again. But I got tempted and I did a full system upgrade, and now... my xorg is broken.
    I'm using ATI proprietary drivers catalyst 8.12-1 with xorg 1.5.3-3. My card is an ATI x1950 pro.
    It used to work perfectly, but since the update, when i startx I just get a terminal (because of my .xinitrc) in fullscreen without my window manager getting launched, and my mouse in the middle of the screen; and nothing responds the mouse won't move, even ctrl+alt+backspace won't work. I have to ssh on my machine and 'killall X'.
    I tried starting off with a default config (using aticonfig --initial -f), but still the same problem.
    I have a dual screen setup.
    I disabled AIGLX and Composite, but no success.
    If I fail to repair this, since I made a backup of my pacman database, I could revert it right ?
    Please help us, us pwned ATI users !
    Here is the /var/log/Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux fatale 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
    Build Date: 05 December 2008 09:10:55PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 13 03:36:24 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "ScreenSamsung" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "PS/2 Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "Xinerama" "true"
    (**) Option "AIGLX" "false"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) Xinerama: enabled
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is disabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling PS/2 Mouse
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d5900
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc RV570 [Radeon X1950 Pro] rev 0, Mem @ 0xe0000000/0, 0xf5000000/0, I/O @ 0x00008000/0, BIOS @ 0x????????/131072
    (--) PCI: (0@1:0:1) ATI Technologies Inc RV570 [Radeon X1950 Pro] (secondary) rev 0, Mem @ 0xf5010000/0
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (--) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (WW) Warning, couldn't open module record
    (II) UnloadModule: "record"
    (EE) Failed to load module "record" (module does not exist, 0)
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    Module class: X.Org Video Driver
    (II) Primary Device is: PCI 01@00:00:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.56.4
    (II) ATI Proprietary Linux Driver Release Identifier: 8.561
    (II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 4.1
    (--) Assigning device section with no busID to primary device
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    (--) Chipset Supported AMD Graphics Processor (0x7280) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x9377518
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "dri" "true"
    (**) fglrx(0): Option "KernelModuleParm" "agplock=0"
    (**) fglrx(0): Option "RingSize" "8"
    (**) fglrx(0): Option "EnableDepthMoves" "yes"
    (**) fglrx(0): Option "UseInternalAGPGART" "no"
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    ABI class: X.Org Server Extension, version 1.1
    (--) fglrx(0): Chipset: "Radeon X1950 Series" (Chipset = 0x7280)
    (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x0762)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    (--) fglrx(0): MMIO registers at 0xf5000000
    (--) fglrx(0): I/O port at 0x00008000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (**) fglrx(0): Option "mtrr" "on"
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 3.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    (II) fglrx(0): VESA VBE OEM Software Rev: 9.13
    (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: RV570
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): Using adapter: 1:0.0.
    (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
    (II) fglrx(0): PCIE card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000090, disabled=0x00000000
    (II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: NUL Model: 1 Serial#: 1
    (II) fglrx(0): Year: 2001 Week: 1
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) fglrx(0): Sync: Separate
    (II) fglrx(0): Max Image Size [cm]: horiz.: 31 vert.: 23
    (II) fglrx(0): Gamma: 1.00
    (II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.597 redY: 0.343 greenX: 0.316 greenY: 0.566
    (II) fglrx(0): blueX: 0.153 blueY: 0.131 whiteX: 0.310 whiteY: 0.328
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 65.0 MHz Image Size: 304 x 228 mm
    (II) fglrx(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1184 h_border: 0
    (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
    (II) fglrx(0):
    (II) fglrx(0):
    (II) fglrx(0): Monitor name:
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff003aac010001000000
    (II) fglrx(0): 010b0103081f1700caf0649857519127
    (II) fglrx(0): 214f54afce0001010101010101010101
    (II) fglrx(0): 010101010101641900a0400026301888
    (II) fglrx(0): 360030e410000018000000fe000a2020
    (II) fglrx(0): 20202020202020202020000000fe000a
    (II) fglrx(0): 202020202020202020202020000000fc
    (II) fglrx(0): 000a202020202020202020202020000e
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Connected Display2: DFP on secondary TMDS [tmds2i]
    (II) fglrx(0): Display2 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: SAM Model: 1e5 Serial#: 1212821817
    (II) fglrx(0): Year: 2006 Week: 7
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: Off
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
    (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@67Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 832x624@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1280x1024@75Hz
    (II) fglrx(0): 1152x870@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    (II) fglrx(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
    (II) fglrx(0): Monitor name: SyncMaster
    (II) fglrx(0): Serial No: HMEL205539
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff004c2de50139314a48
    (II) fglrx(0): 0710010380261e782ade95a3544c9926
    (II) fglrx(0): 0f5054bfef8081808140714f01010101
    (II) fglrx(0): 010101010101302a009851002a403070
    (II) fglrx(0): 1300782d1100001e000000fd00384c1e
    (II) fglrx(0): 510e000a202020202020000000fc0053
    (II) fglrx(0): 796e634d61737465720a2020000000ff
    (II) fglrx(0): 00484d454c3230353533390a20200056
    (II) fglrx(0): End of Display2 EDID data --------------------
    (WW) fglrx(0): More than one displays are connected,so clone mode is enabled
    (II) fglrx(0): Primary Controller - DFP on secondary TMDS
    (II) fglrx(0): Secondary Controller - CRT on secondary DAC
    (II) fglrx(0): Internal Desktop Setting: 0x00000008
    (II) fglrx(0): POWERplay version 3. 1 power state available:
    (II) fglrx(0): 1. 574/682MHz @ 0Hz [enable load balancing]
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 24 modes found for primary display.
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
    (**) fglrx(0): *Mode "1280x1024_mine": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024_mine"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (**) fglrx(0): Default mode "1280x1024_mine": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024_mine"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (**) fglrx(0): *Mode "1280x1024": 109.6 MHz (scaled from 0.0 MHz), 63.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x60.0 109.62 1280 1336 1472 1720 1024 1024 1026 1062 +vsync (63.7 kHz)
    (**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
    (**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
    (**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
    (**) fglrx(0): Default mode "1280x720": 60.5 MHz (scaled from 0.0 MHz), 37.0 kHz, 50.0 Hz
    (II) fglrx(0): Modeline "1280x720"x50.0 60.46 1280 1328 1456 1632 720 721 724 741 +hsync (37.0 kHz)
    (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
    [.. Millions of ModeLine's..]
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.0
    ABI class: X.Org Video Driver, version 4.1
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): Ring buffer size: 8 MB
    (**) fglrx(0): KernelModuleParm: "agplock=0"
    (II) fglrx(0): [pcie] 262144 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Direct rendering enabled
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Interrupt handler installed at IRQ 16.
    (II) fglrx(0): Exposed events to the /proc interface
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (II) fglrx(0): detected X.org 7.4.3.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 13, (OK)
    drmOpenByBusid: drmOpenMinor returns 13
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x4d000
    (II) fglrx(0): [drm] mapped SAREA 0x4d000 to 0xb7af0000
    (II) fglrx(0): [drm] framebuffer handle = 0x4e000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.56.4
    (II) fglrx(0): Date: Dec 1 2008
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x0004f000
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01004000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1280,3280)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1280 x 2256
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (**) fglrx(0): Textured Video is enabled.
    (II) LoadModule: "glesx"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension GLESX
    (II) fglrx(0): GLESX enableFlags = 80
    (II) fglrx(0): GLESX is enabled
    (**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Setting up tile and stipple cache:
    32 128x128 slots
    14 256x256 slots
    5 512x512 slots
    (II) fglrx(0): Acceleration enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (WW) fglrx(0): Option "AccelMethod" is not used
    (WW) fglrx(0): Option "AccelDFS" is not used
    (WW) fglrx(0): Option "GARTSize" is not used
    (WW) fglrx(0): Option "BufferSize" is not used
    (WW) fglrx(0): Option "UseFBDev" is not used
    (WW) fglrx(0): Option "ColorTiling" is not used
    (WW) fglrx(0): Option "RenderAccel" is not used
    (WW) fglrx(0): Option "SubPixelOrder" is not used
    (WW) fglrx(0): Option "DynamicClocks" is not used
    (WW) fglrx(0): Option "PCI:1:0:0" is not used
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 14, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 14, (OK)
    drmOpenByBusid: drmOpenMinor returns 14
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) fglrx(0): Shutdown CMMQS
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x4d000 at 0xb7af0000
    Thanks :)
    edit: weird thing (or not) but DPMS (or whatever it is, the thing that turns off my monitor after some time) seems to work, altough moving the mouse or pressing the keyboard doesn't wake up the screen. Has this something to do with my mouse and keyboard not being recognized by xorg ?
    edit2: omg yes it is ! I added:
    urxvtc -e 'screen'
    so when I startx an un-window-managered fullscreen terminal launches with a screen session, and if I ssh on it I can type in this terminal from another computer, and the screen actually displays what I'm typing, so that's definitely an input problem !
    Final Edit: Well all solved, concerning the "frozen" stuff, it was just that my keyboard and mouse weren't detected because of the new hotpulg thingy (check http://wiki.archlinux.org/index.php/Xor … otplugging for more info, or just add 'hal' to your rc.conf), then restored my original xorg.conf, rebooted and it all went back to normal (: ). Hope this helps.
    Last edited by arsenist (2008-12-13 03:28:42)

    Has this something to do with my mouse and keyboard not being recognized by xorg
    Hmm, I wonder what it would reveal if someone read the news? http://www.archlinux.org/news/424/
    Even your Xorg.0.log is telling you the problem.
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Keyboard0
    (WW) Disabling PS/2 Mouse
    Last edited by jacko (2008-12-13 03:28:40)

  • My ipod shows a blue screen and then turns off and wont turn back on. What should I do?

    I turned on my iPod touch today and it turned on as usual. I unlocked it and went to play a game. I got tired of the game after about 5 mins so I went to the home screen. I swiped to the previous screen and it showed a blue screen after about 3 seconds. I was sort of surprised as this hadn't ever happened before. It didn't turn itself off so I pressed and held the power and home buttons. It turned off after three seconds. I tried to turn it back on but it wouldn't turn back on. I remembered about what someone said about pressing and holding the power button and the home button. I did so and as expected it turned back on. I unlocked it and the same thing happened again. Blue screen! I turned it off and tried the same thing again. Yet this time when it got to the lock screen, I pressed and held the power button and slid to power off. I didn't want to try turning it on again so I asked this question. WHY DOES MY IPOD SHOW A BLUE SCREEN? (Over and over agin every time I turn it on?) Please help!

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Pictures open at lower left of screen and are cut off at the bottom

    When I go to a site and open a picture it opens on the left bottom of the screen and the bottom portion of the picture is cut off. Any suggestions?

    Please post the web address here so we can look for ourselves. Also . . . .
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • AHHHHHHH!!!!!!! frozen screen and reset loop of death.....

    ok so my iphone froze the other day...i hit all kinds of buttons and nothing would work until i used the slee/home button reset...it worked but then a few mins later i pushed the sleep button to wake up the phone and the screen flashed many multicolored vertical lines (sort of like when your tv loses reception)and then proceeded to fully reset the phone bringing up the apple icon and finally to the home screen...when i use the phone from there everything works fine, or even if i hit the sleep button to turn it off and then i hit it again to turn it right back on im fine, however if i leave it "asleep" for about a minute or so and then try and wake it up...the whole process repeats with the horrible screen and reset...i've tried all the resets in the phone with and without erasing content, and i even tried the restore once but still it's jacked up....any thoughts? has anyone heard of this?

    I managed to give my phone these symptoms, but as I'd just made a settings change, I managed to switch it back and the problem went away:
    I set Mail to automatically check for messages, rather than only manually.
    As soon as I exited the system preferences, the phone froze. It would then come back for a few seconds, then freeze again.
    I couldn't switch the phone off, and when the unlock screen appeared, the "slide to unlock" text didn't "pulse" like it normally does.
    The on-off button took me to the home screen (for some reason) and, by waiting after each "button" press for 10secs for it to take effect, i managed to switch back to manual email checking.
    As soon as I did this, the problem disappeared.
    I don't know if this relates in any way to your problem, but you never know...
    good luck.
    Message was edited by: Tim van Someren

  • In i photo when double clicking on a photo to get it full screen it briefly comes full screen and then goes off and all i get is a large exclamation mark why is this happening? please help

    in i photo double clcking on a photo   it comes full screen briefly and then goes off and   a 
    exclamation mark appears

    iPhoto rebuild database:   https://support.apple.com/kb/HT2638
    Sometimes it's a file problem that is automatically loaded when the program launches, like iPhoto for instance, you'll have to do a tedious process of elimination to find the culprit, like a corrupt picture in a huge iPhoto Library folder.
    One can right click on the iPhoto Library and "show package contents" to access the Originals folder containing one's original photos.
    ..Step by Step to fix your Mac

Maybe you are looking for

  • Album by Year

    I cannot get the plain "Album" sort option in iTunes. It changed itself to "album by year" and is sorting most all of my albums out of order and really messing with compilations. I have tried changing the field through the view menu and by clicking o

  • Working with Aperture for the Press

    I would like to change my workflo and make it faster to get images to my Co. website faster then my competition. I usually drag my images from my card to a folder on my desktop with the event title. I then do my metatag info about the event to my sel

  • I need to reinstall lion but the control-r does not work

    My Macbook is about 3.5 years old and runs with Lion.  The System Preferences froze what in the process of changing the decktop wall paper. So I forced quit and repaired permissions/rebooted.  That did not clear up the problem and I tried Verify Disk

  • Changing leave request status.

    Dear all expert, I am trying to customize my leave application wf (12300111) to 2 level of approval. I am facing a problem, after my first approval approved the leave request, the status in PTREQ_HEADER will change to approved. How can i reset the st

  • Itunes Kills my wireless network??

    Any one have any idea why when I am using Itunes it disconnects me from my wireless network? When I have it connected via a cat5 cable it works fine. I have a server with all my tunes on it and my entire library is on there. This system has been work