HT201270 My wifi is not working and the bluetooth is searching
My wifi is greyed out and not able to be turned on. The bluetooth is also not working and is simply searching continously.
My iphone 4s 7.1.2 is doing the exact same thing. and the bluetooth continously searching isn't what it is normally supposed to do. It can't find anything.
Similar Messages
-
when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to
First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG -
I have update ios5.1 now wifi does not working and wifi hotspot does not displaying in setting
Dear All,
I have update ios5.1 last week on my iphone4 16GB. Now Wifi is not working and Wifi Hotspot not displaying in setting menu.
Pls help. What can i do now
SenthilCan you tap the little "i" in the blue circle and "Forget this Network"
-
I Purchased iphone 5C on December 2014. However now it's very difficult to have it working. The screen is constantly not working and the right side bottom&top does looks like its melted? the cover I mean , which maked the phone slide out of its cover. I did not purchase anny additional warranty or insurance so I don't know what to do with it? Can i send it in and they can send me a new one under the manufacturer warranty or what do i do with it?
I Have alwa had an iphone but this 5c is making me never have one again. Thanks in advanceEach iPhone comes with a one-year warranty. You said it looks melted? That's going to be difficult to prove that you did not damage it, and it happened on its own. That is the only way it would be covered.
-
he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..
As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck. -
My curser pad is not working and the curser is going crazy. I have tried everything and it still does not work?
I don't know what other solutions you've tried but on mine it was like a "Ghost in the Machine" (moving around and clicking on things on its own) and all I did to fix it was to lightly dampen a cotton ball with window cleaner (evaporates) and clean firmly around the inside edge of the pad and to also click it firmly quickly and many times to clean out ANY kind of dust or debris that has fallen into the cracks. worked GREAT for me , so far!!???
-
When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.
Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.
-
have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the MBP to the Apple Store to have it checked.
Best -
last 6 months back brought i pod for 50$, but i came to know that,the product is vintage model, hence no support from apple, now problem is that ipod is not working, and the serial number is <edited by host>,can u pls reach me on <edited by host>
This is a user-to-user support site not a place to reach techs. You can make a Genius Bar appointment at your nearest Apple Store and see if you can do an out-of-warranty replacement or you can use a 3rd party repair site.
-
why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing! I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not.
Anyone else feel me on this?
any help?Well that still didn't make any kind of difference. I would just do without it but I've becomes really use to it with Avid for so long. I have to admit there are a lot of small moments like this that makes me miss Avid. Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...
-
I cant scroll my iphone or the touchscreen is not working and the invert color is on i wanted to off it i cant scroll it down what will i do i need some help
Did you try recovery mode? iOS: Unable to update or restore
Or How to put iPod touch / iPhone into DFU mode -
Myi iphone4 microphone not working and the home button not work after IOS6 updat
Myi iphone4 microphone not working and the home button not work after IOS6 updat
Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going. -
My music will not play after it gets to a certain volume. It works fine if i turn it up loudly however when i turn it down past a point it will not work and the music wont play.
If in settings, music, volume limit is off then restart your phone first. Hold the home and off button down until the apple symbol comes up.
-
Upgraded to ios6 this morning on iphone 4. Now my email will not work and the settings are correct
upgraded to ios6 this morning on iphone 4. Now my email will not work and the settings are correct
Try a couple of basic troubleshooting steps that can apply to any iPad issue.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail app and restart. In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
None of these things may work, but without more specific information, they are a good place to start.
Maybe you are looking for
-
Value based on the periodic unit price(only with pr.ctrl S) field in MatMas
Dear all, There is this field in mateial master called "Value based on the periodic unit price (only with pr.ctrl S)" in accounting view 1, 1 - May I know what is this field about (in between our company using material ledger). 2 - May I know why the
-
Using JavaScript to extend the height of a DIV to the height of a document or page.
Hello everyone, How can I use JavaScript to dynamically resize a DIV on a page so that the div extends vertically to the size of the page or document. I have been experimenting all evening with different methods, some don't even work. Thanks everyone
-
Hi everybody, I've been searching around for quite some time, but didn't find a simple solution to my problem. I've a stacked bar chart with multiple categories. There I need to place the sum of all categories above the bar. An example can be found h
-
Hi experts, I detected an error that occurs when I try to copy an existing journal entry. I think that the problem is related to the maximum length of the description of the journal entry, that is 160 characters. When I copy an existing journal entry
-
Hi all, I am facing an issue when I run one of my custom ALV reports in the background. There is a one line gap between each line of the output when we check the spool content. I tried to change the number of columns in the existing printer format to