HT201270 Update Carrier Settings (MacBook Pro + iPad)
Using iPad in the UK on O2 carrier.
As of yesterday, iTunes keeps asking if I want to update the carrier settings of the iPad. I've run the update more than once already and whenever I link the iPad to iTunes it asks me again.
Did this happen to anyone? Any solutions? It is quite annoying...
Thank You
There are others with the same problem:
https://discussions.apple.com/thread/4032787?start=0&tstart=0
See my comment at the end of the thread re my trip to the Apple Store.
Similar Messages
-
HT201270 Why do I get a message about updating carrier settings on my iPad every day?
I get this message every day. How can it need to update the settings every single day? It is weird. Ive been getting this for 2 weeks now.
lukeoatham wrote:
I am still getting the carrier message so the O2 Guru didn't make any difference.
Thanks.
Well I've been on to Apple Support again and they say that since I did a factory restore I'd have a virgin copy of the iOS so it can't be a problem with that. I asked about there being a bug in the iOS but he wouldn't hear of this - no one else seems to have complained to Apple about this but I did mention this Discussion Group. All he could suggest is that I try another computer, to do a factory restore again there and then come back to the Mac!
I do have a WIndows XP virtual machine and am trying that just now, to see if this gets rid of the problem, and I'll report back. However it's not everyone that would have the facility to go down this route! -
I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"
any help pleaseIf you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?
Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time -
When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.
If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!
Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location. -
HT201270 What's the benefit of updating carrier settings?
I received a notification to update carrier settings on my iPhone 5. But I am not able to find the benefits of updating my iOS with this new update.
Carrier updates are sometimes issued to reslove issues the phone may be experiencing. Why don't you contact your carrier and ask what this update is all about.
-
What can I do to get "maps" to work on my Macbook Pro, iPad and iPhone when connected to wifi at home. iPhone "maps" work fine when connected to cellular service. Maps on wifi shows me about 55 minutes away from my current location. Very frustrating. I called Time Warne,r my service provider, but they had no answers since they were not knowledgeable of this situation. Anyone else having problem? I just updated all devices to newest update. Is that the problem.
Did you bring your wireless router with you? If so, it's possible the iPad is getting its location through the router and the router still "thinks" it's where you used to live.
Try taking your iPad to another location where there is wifi (such as a coffee shop). Then, try an app that uses location services. If it's accurate at another location, then the source of your problem is your router.
~Lyssa -
After installing a software update on my Macbook Pro, it would not reboot passed the gray screen and then would shut down.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
When I add an event to calendar on my iphone, it updates on my MacBook Pro. But when I add it on my Mac, it does not update on my iPhone. Help please.
Change your time zones in the settings, They are not on the same time zones.
-
Music from MacBook Pro/iPad/iPhone never streams immediatly
Anybody recognizes this problem?
Everytime that I start a musicfile from either my MacBook Pro, iPad or iPhone I have to switch the audio output back from ' Apple TV' to 'Computer' and than back to 'Apple TV' otherwise the Apple TV is automatically switched on but no music sounds... My idea is that with the first time I choose it Apple TV is switched on, but than has to me activated, which only seems to be possible doing one step back (choose Computer) and than again one forward by choosing the Apple TV again.
I was hoping that this problem was solved with:
Apple TV Software Update 4.4.3
Feature
Summary
Audio output
Addresses an issue in which audio may not play through the optical port when the TV is turned off.
But there still seems to be some problems with this...
Any solutions or suggestions?!?IS tnis the computer with which you normally sync?
-
Can't install SMC Firmware Update for my MacBook Pro 15" early 2011
Can't install SMC Firmware Update for my MacBook Pro 15" early 2011
Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings. -
I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?
Go to: Apple > Force Quit
and select Mail > Force Ouit. -
After recent update to my macbook pro itunes will not open, it just bounces when I click on it
fter recent update to my macbook pro itunes will not open, it just bounces when I click on it
Means they are going to mess up your iPhoto Library pictures database so it's unreadable by older versions of iPhoto on older OS X operating systems.
You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
I dont' think Apple will every intentionally touch the originals, however it's possible they could.
Maybe you are looking for
-
Is there a way to run a query with all the logging to rollback turned off? I have a script that runs many queries on a table, and I keep running out of rollback space. I know I can specifically set a rollback segment with a "SET TRANSACTION USIN ROLL
-
So i have a gx600 notebook it works great and i love it, but recently I got tritton ax360 5.1 surround sound headset. They can plug into the three audio jacks and work okay although I dont have the use of the microphone on the headset or the surround
-
Manage site in Business Catalyst redirects
when I click Manage Site in Business Catalyst it my browser redirects me to: https://nj.worldsecuresystems.com/Admin/GoSite.aspx?SiteGuid=cb468ec5-4d13-439d-acfc-8d9f1 13028f5#token_type=bearer&expires_in=28799992&access_token=eyJhbGciOiJSUzI1NiJ9.ey
-
Color fill in Adobe "Flash" CC
In Adobe Flash CC (CS 5.5-6) how do you use pen and do a color fill on a random shape you created?
-
IPod Nano 4th gen - Use iTunes to Restore
My cousin went to India for a couple of months so he gave me his iPod Nano. It was working when i got it, and i listened to his songs. So I downloaded the latest version of iTunes so I could put my songs in it. When I connected it, iTunes told me to