HT201272 i have gone into the settings on my itunes but,cant find my prevous purchases when i click on more.help

i seem to have lost my ringtones i have purchased from my iphone.

If you have an existing ID, & you don't want to use a credit card, you'll have to redeem an iTunes gift card. If you don't want to do that, you'll have to create a new ID by following the directions here, EXACTLY:
http://support.apple.com/kb/ht2534

Similar Messages

The wifi on my iphone 4s is not working, i have gone to the settings and tried to swicth it on but it shows the gray slide and refuse to turn on, what should i do about this

product name - iPhone 4s
memory - 64 GB
storage capacity - 56.6 GB
version nos - 8.1.1(12B435)
the WiFi on my iPhone 4s is not working, i have gone to the settings and tried to switch it on but it shows the gray slide and refuse to turn on, what should i do about this.

iOS: Wi-Fi settings grayed out or dim - Apple Support

Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?

Since updating my iphone 4S it has started showing no service, i have gone into the apple store and they couldn't fix it does anyone have any suggestions?

They offered to value my iPhone and then put that money towards buying me out of my contract however I don't want to have to spend more money when my contract ends on august anyway.

Got a MacBook Air 128 flash storage like a month ago and in the last few days I have gon into the "get info" it says there that I have 160 GB avalibile , dos anyone know what could be going on with my Mac?

Got a MacBook Air 128 flash storage like a month ago and in the last few days I have gon into the "get info" it says there that I have 160 GB avalibile , dos anyone know what could be going on with my Mac?

This issue can be caused by a corrupt local snapshot index. The procedure below will temporarily disable local snapshots and force the index to be rebuilt.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil disablelocal
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command.
To re-enable:
sudo tmutil enablelocal

I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas?

I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic

Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy

Hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??

hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
Please could someone help???
And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
Thanks alot! I really appreciate your help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have the latest version of Itunes but it freezes my whole computer when it starts up

I have the latest version of Itunes but it freezes my whole computer when it starts up. I have installed/reintalled Itunes but it still stops my whole computer when I start Itunes.

OK, so we rule out LSP then,
Try following steps one at a time and test your itunes:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator", now try your itunes.
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

I have updated to the latest version of itunes but now i cannot see what i have on my ipod

i have update to the latest version of itunes but now i cannot see whats on my ipod

Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy

I had my Ipod nano 7Gen factory restored. Nano touch is working smooth without any song init but after i have any of the songs shifted from itune touch buttons get messed up. They don't work. Help me in over coming this issue

I had my Ipod nano 7th Gen factory restored. Nano touch works smooth without any song in-it but after i have any of the songs shifted from itunes, touch buttons get messed up. They don't work. Help me in over coming this issue.

Hello Rohantm,
Thank you for the details of the issue you are experiencing with your iPod nano (7th generation) touch screen. I recommend the following steps for the issue you described (you can skip the steps you have already tried):
Touch screen does not accept input
Clean the screen with a microfiber polishing cloth.
Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
Sync with iTunes and restore the iPod.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Find the full article here:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Thank you for using Apple Support Communities.
Best,
Sheila M.

My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore, can anyone help with this?

My ipod touch is disabled, i installed the latest version of itunes, but cant figure out how to restore the ipod, can anyone help?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

I am Whenever I click a button on any web page there is no response. I have gone through the settings and have not found what needs to be changed to enable

I open web pages, such as adobe, and click the button, in this case to download Flash Player and there is no response. I have opened and reviewed the settings for foxfire and have been unable to find anything that might remediate this issue. Additionally, I have also checked the settings in Trend Micro and have uncovered nothing there that would remediate this issue.
Interestingly, the button on this page appear to work quite well.

You may need to turn off the feature of "warning" you about redirects. In some cases Firefox does not display the infobar and just silently blocks the redirect, which I suspect is what is happening on download sites.
To test this theory, open
orange Firefox button (or Tools menu) > Options > Advanced
On the General mini-tab, ''uncheck'' the box for "Warn me when websites try to redirect or reload the page"
Then try the download again (you might need to reload the page before trying again, depending on how the site is designed).
Any luck?

I want a case for the thrid gen ipod touch but cant find any.

i want a case for my ipod touch thrid gen but cant find any help.

Have you looked on Amazon? Here is what came for for iPod Touch 3G Cases.
http://www.amazon.com/s/ref=pd_lpo_k2_dp_sr_sq_top?ie=UTF8&keywords=3g%20ipod%20 touch%20case&index=blended&pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=20 1&pf_rd_i=B002SHYU54&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0CRHRB0THNNC75P4X9N2
B-rock

I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

I have looked through the video tutorials for CS6 and cant find any help for PHP using SQL.

Where is a good place that I can go to learn more about using dreamweaver and different languages than html. Is there a service that adobe offers that I could buy that would take me from rookie all the way to professional with a good easy to use structure such as adobe tv but more advanced and thorough? I am trying to build a website with a log in page and registration. I have the HTML part down well enough but need help writing the php scripts and using SQL to store the user info

I'm moving this to the main Dreamweaver support forum.
In answer to your question, you need to be aware that the PHP server behaviors in Dreamweaver CS6 use the original MySQL functions that are scheduled to be removed from a future version of PHP. The server behaviors have already been removed from Dreamweaver CC. If you are planning to create a site using PHP and MySQL, do not rely on Dreamweaver's server behaviors. You must use either MySQLi (MySQL Improved) or PDO (PHP Data Objects) instead.
If you're looking for video tutorials, you might be interested in the courses I have created for lynda.com. As a beginner, a good place to start would be PHP for Web Designers or Introducing PHP (there are several sample videos that you can watch for free on my website). Both courses were recorded on Dreamweaver (PHP for Web Designers on Dreamweaver CS6, Introducing PHP on Dreamweaver CS5.5). PHP for Web Designers shows how to connect to MySQL with MySQLi. You need a subscription to lynda.com to watch the complete courses, but you can get a seven-day free trial by following the links on my website.
If you don't want to commit to a subscription service, I have also written a book called PHP Solutions, which covers MySQLi and PDO in depth. It also shows how to build a login system. At the moment, the second edition is available, but a revised third edition is due to go on sale in December.
There are also a lot of free resources on the web that you can find. The important thing to beware of is that a lot of old material relies on the original MySQL functions. Whichever resource you use, make sure it shows how to use MySQLi or PDO.

HT201272 i have gone into the settings on my itunes but,cant find my prevous purchases when i click on more.help

Similar Messages

Maybe you are looking for