HT201272 I made a purchase of an album on iTunes...somehow I deleted the whole album from my iMac and now when I go back to my purchases it does not give me the option to download the whole album again, instead it gives me the option of plaing them...plea
I made a purchase of an album on iTunes...somehow I deleted the whole album from my iMac and now when I go back to my purchases it does not give me the option to download the whole album again, instead it gives me the option of plaing them...please help!!
Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library
Similar Messages
-
The print driver for HP Laserjet 3380 was for print only, was removed and when I went to download from apple, it stated to contact manufacturer. I have old driver in Time Machine, how do I reinstall from Time Machine that driver that worked?
Hi,
Trible post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-solution-center/m-p/4790405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
I am a new at this. I just rented and downloaded a movie, clicked out of iturnes and now when I go back into itunes, I don't see a way to play the movie that I just downloaded ten minutes ago. I just want to watch it on my laptop.
Help.Welcome to the Apple Community Vane_paranormal.
If you rent a movie on your phone, you have to watch it on your phone, likewise if you rent it from the Apple TV you will have to watch it there.
If you want to watch a rental on multiple devices, rent it from a computer. -
Can anyone explain why on my iPhone 4S, whenever I play music, it won't hold my place in the song? I pause it, and then when I go back later, it's all the way back at the beginning? A google search was not very helpful, any tips would be great!
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
thanks.If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.
-
I deleted the folder System en Macintosh HD and now when i on my mac it says Disk Error Press Any Key To Restart Please HELP !!
Reinstall Mac OS X.
(59450) -
I tried to update my iphone4, in the middle it gave an error and now when try to connect it the computer doesnt even detects it and neither does itunes
Power the phone off completely. Plug the USB end of the cord into the computer, leaving the other end unplugged from the phone. While the phone is powered off, open up iTunes, hold down the home button on the phone, and plug in the USB cord to the phone, making sure you keep holding down the home button. In about 15 seconds you should get a pop-up in itunes saying that it's detected an iPhone in recovery mode. Click 'Ok' and 'Restore'.
Your iOS update crashed and your phone is in recovery mode. The good news is that this will fix it, bad news is that unless you had everything backed up in either iTunes or iCloud, you've lost everything as your phone was wiped when the iOS update crashed. -
My IPAD was upgraded and now when I open a book in Kindle it will not open and reverts back to opening screen of the IPAD and this occurred after some upgrade with IOS.Help.
ThanksThe app may not be iOS6 compatible. Have you tried to reset it? HOld down the sleep and home keys, past when you see the red slider, and unitl you see the silver apple. Let it reboot and see if that helps. If it doesn't, then I'd contact Kindle and see when they're going to update their app or if they even know there's an issue. Unfortunately, the burden is on app developers to be compatible with the operating system, not on the OS to be compatible with millions of apps. So it's up to them.
-
I have an iphone 5c and I left the office to reach 0 percent and now when I put it in charge of a battery icon appears red and under a usb cable and will not turn ... what can I do ?
Read this
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
and ensure you plug it into a wall socket to recharge -
Hi,
Sorry, I'm new to the community, so apologies if I'm repeating myself.
OK, so I tried to install Windows Vista onto my iMac with the disk partition. Everything was going fine and it wasn't until last minute, when it was installed that an error came up saying that this can only be done with Windows 7. After this error, I couldn't access any errors of my iMac and when I shut down and restarted my computer, it automatically logged into Windows.
So after a panic, I rang Apple Care and the lady helped me log into my apple area, delete Windows from my iMac, and all was restored.
However, now when I shut down my computer and boot it back up, I think my iMac is trying to log into Windows areas that no longer exist. It loads up a black screen and doesn't move from there. To log into my Apple area, I have to do the whole process of holding Alt immediately after I switch the power on and access the Mac drive and log in that way.
It's beginning to become a real pain and I'm paranoid this process is going to damage my computer. Any advice on how to restore logging-in back to it's former glory when I first purchased it?
ThanksSolved it. Thank you very much for that!
-
I downloaded new version of Itunes to my ipad2 and now I can't find sync button. There is nothing down the left side to pick device, etc. The screen is completely blank. Help
if your using windows, try this.
-
Just updated to the latest Flash and now it's saying for the last 2 days that Flash has crashed on my Firefox on my iMac. It was working fine before then. It wasn't working at first on my Safari either after the update but after closing the browser and reopening it, Flash was working. I tried the same thing with Firefox and even tried shutting the computer off and it still doesn't work. After uninstalling and reinstalling Firefox, of which I had the latest version before it was uninstalled, Flash still doesn't work. It doesn't work for games, videos, etc, even when trying to look at the Adobe website, it still says that it's crashed. I called Adobe and they said that it's not an Adobe product problem, but a browser problem. Any suggestions?
You updated from Flash 12 to Flash 13.0.0.182, correct?
IF it is the same thing, as seems likely, it would appear to be a known issue only affecting some Macs and the work around is to downgrade by using an uninstaller and reinstall the older versions
* ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround <br />Apr 10, 2014 4:28 PM http://forums.adobe.com/thread/1447282
*# Download and run our uninstaller: http://fpdownload.macromedia.com/get/flashplayer/current/support/uninstall_flash_player_osx.dmg
*# Download and run the version 12 installer from: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_player_12_osx.dmg
'''Adobe Update 4/10'''<br>
We have determined that this problem is due to a compiler update in our build infrastructure that exposed a long-standing bug in a Mac system library. Flash Player now attempts to use CPU instructions that are not available on a subset of supported Mac hardware from 2006 to 2007. None of the machines in our compatibility labs are affected, so the issue didn't show up in our testing, but we were able to track down a machine that reproduces the issue yesterday. We're actively working on a fix and I'll update this post again once we have more information. -
hi i am having a problem with importing from the Bin to The desktop i have just reinstalled
logic and this is somthing new for me can someone help me please walterHi wallyatworku2, do you think you could manage to post a screenshot here on the forum, of your Track Window and Bin and also the allert generated bij Logic?
-
I tried to set up Sync on my smartphone. I had an "old format" account and started setting up a new one.
The verification email was immediately "outdated".
Since :
-When I request a new email (on mobile) it says it could not be sent.
-When I try and validate my email (on desktop) nothing happens.
-When I try and connect, I get an "Invalid Token" error.
-When I tried to "reset my password", the link "encountered an error".
-I can no longer sync my devices with the "old" method.
EDIT : I tried creating an account with another email... same problem.Seems to have resolved itself... Anyone can confirm ?
Maybe you are looking for
-
How to display UI elements dynamically on the click of a radiobutton
hi all, I have created two radio buttons rb1, rb2 dynamically. If i click on rb1, ...... one label, one inputfield (ie., some UI elements ) must be displayed in the same view & if i click on rb2, other UI elements must display. can anyone tell how
-
FF3.x: Trying to deploy via Citrix w/o Location Bar & Search Bar (kiosk mode)
Is is a userpref that would allow me to disable the search and address bars?
-
VAT Registration number in FB60
Hello SAP experts, May any body advise me how can I get Vat registration numger in FB60 automatic from Vendor Master(I hope it should) I am not seeing Vat registration number(field is in display mode) in FB60 while doing invoice for the vendors where
-
Integration with iProcurement application
I'm trying to integrate Oracle iProcurement application's main business process, i.e browsing through shopping catalog, adding items to the shopping cart, saving and retrieving shopping cart, retrieving the pending requisitions etc, with my web appli
-
Can't access welcome page after installing 10gAs 10.1.2.0.2
I've installed 10gAs 10.1.2.0.2 on Unix and am trying to check my installation by accessing the welcome page. The url I'm using is http://hostname:7777. I've checked the httpd.conf file to confirm the port and even the file at ORACLE_HOME/install/rea