HT201274 erase ipad when I do not know my Restrictions Passcode?
can I erase all content on ipad when I do not know my restrictions code? How?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
Similar Messages
-
How Do I Reset My Settings When I Do Not Know The Restrictions Password?
When I went to the app Settings. I was trying to change my Restrictions Password. But I do not know the Passcode/Password.
Nike_Educated.16 wrote:
I was trying to change my Restrictions Password. But I do not know the Passcode/Password.
To remove the Restrictions passcode you will need to either...
1) Restore the Device as New...
See Sections 5 and 6 here...
http://support.apple.com/kb/HT4137
OR...
2) From a Backup created Before the Restrictions Code was set....
Restore from Backup > http://support.apple.com/kb/ht1766 -
how do i get into my ipad if i do not know passcode and i dont want to erase the data i have on it
Hello Mariemonkey82
Follow the steps in the article below to put your iPad into recovery-mode so that iTunes can restore it.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G. -
How do I get twitter installed on my iPad when it does not have iOS 5.0?
How do I get twitter installed on my iPad when it does not have iOS 5.0? How can I upgrade my iPad?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Hi,
I am user iPad and I do not know how can attach a file into email e.g. CV.
ThanksYou attach files within the app that creates the file or within the app that the file is saved. For example you email photos from within the Photos App itself. Typically there will be an action icon within the app - an arrow icon many times - you tap on that to bring other options like Share - then Email.
Attachments must be mailed within the apps themselves. -
How do I reset my security questions when I do not know the originals?
how do I reset my security questions when I do not know the originals?
Is there a support phone number to call to speak to a live person in the USA?
Izzy12345Hello Izzy12345,
Thanks for the question. The following article outlines the process of resetting your security questions:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you feel more comfortable speaking with someone, the following resource outlines how to start a support request:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thanks,
Matt M. -
How do I reset my iPad when it will not respond to holding down the on/off button
How do I reset my iPad when it does not respond to holding down on the on/off button. It went to the Apple icon and is frozen there.
Hello charlenefromnew sharon,
Thanks for the question. After reviewing your post, it sounds like the iOS device is not responding. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Not responding or does not turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
HT1766 How do I listen to my music on my iPad when I am not connected to wifi?
How do I listen to my music on my iPad when I am not connected to wifi?
Describe more in detail what you mean.
Does the player start, look like the music is playing, but your hear nothing?
Does the player say it can't find any music?
Are you trying to use ear buds or the built-in speakers?
The fact that you say you can't play music when not connected to WiFi leads me to believe you have not really synced your iTunes library to your iPad but instead are playing your music from iCloud or from Home Sharing. -
HT1430 How do I restart iPad when buttons are not responding?
How do I restart iPad when buttons are not responding?
GIve the reset another try; nothing to lose.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
How do you reset your iPod Touch 5th Gen if you do not know the restrictions password?
I have an iPod Touch 5th Generation and i need to reset it because i am having issues with it not loading basically anything since i did the update. I don't know the restrictions passcode so i was wondering if there was any way to reset it without the password.
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod. . Place the iOS device in Recovery Mode if necessary to allow the restore.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3 or iOS 7
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
I don't know my restriction passcode
i dont know my restriction passcode on my ipod 4th gener...
Forgotten RESTRICTIONS Passcode
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iPod.
- If you are up to file manipulation see the following but it may not work for iOS 6.1.3:
How to reset forgotten Restrictions...: Apple Support Communities
- How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog -
My passcode is working to unlock the screen but does not work with restriction passcode.
Tried it several times but it did not work, though i can use the phone and all features even after 13 failed attempts.
Should restriction passcode be different from what i set?There is no default restriction password. If you didn't set it someone else may have. If you can't find it then you may have to follow the steps here:
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
Do you have a backup which might not have this restriction passcode? If so restore to that backup? -
hello I have a I phone 5 and I want to reset it but I don't know my restrictions passcode. can you help me?
You would need to restore as new if you cannot remember the restrictions code you set.
-
How can I unlock my ipad 4 when I do not know the password
How can I unlock my ipad 4 when I do not kow the password
Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
I am new at using an Ipad. My Ipad was connected to my home wireless. I changed the password on my home router and now I do not know how to change that password on my I Pad. Can someone help me?
Tap settings on your iPad
then tap Wi-Fi
click on the blue arrow which is next to the network
a new section will be opened
it will display the router settings and all ( you dont have to deal with it)
then tap forget network at the top
go back and tap your network
iPad will ask the password of the network just enter the new password and you are good to go
if a message appears unable to connect just go back turn Wi-Fi off then start it again
and try connecting to it again
i hope this will help you if not reply me and ask me for more questions.......do reply if it worked
Maybe you are looking for
-
Windows 2008 Server Configuration - Help
Hello All, I am not an expert in configuring servers and I have just started to learn. Please forgive me if I am doing something funny! I have a router with static IP address and DHCP enabled on the router. The router had the following configuration
-
OATS Load test is not able to scale for more than 10 users
Hi, I am using OATS load test runner for performance testing Fusion based application on webcenter portal.I am not able to run OATS load tester sucessfully for more than 10 VU's.After that it gives a component not found issue or loop error.Please let
-
For SAP BI MOBILE 1. We can force the user to setup the 8 DIGIT PIN. However - is there a way to not allow the user to change the "require application password - after 5 minute" setting? Currently the user has to setup an application password but he
-
Partner Determination Procedure-access sequence
Dear Gurus, My requirement is support team determination when message is created.I maintained the Rule 13200137 in PFAC_RESPO. In this below path in procedure SLFN0001 against partner function procedure of funcions SLFN0003 SUPPORT TEAM (CRM).IN THE
-
Remove shadow on cropping image
Hi All, Can any one help me how to remove shadow on croping image(image from photoshop) in adobe premiere after rendering video?