HT201274 i have ipod 2nd generation and i had reset Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co
i have ipod 2nd generation 32 gb and i had reset > Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!
For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
hello , im working with hebrew and the dot "." isnt correcting to right with the align , i know that in indesign u use with paragraph direction to correct it but here what should i do. sorry for my english
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
I had an Apple ID, but forgot my password. I created a new Apple ID. I belive I used my hotmail account for my apple ID, but I need to remove it, because the information I used do not let me set up my new Apple ID
<E-mails Edited by Host>Why don't you just go to https://iforgot.apple.com and reset the password on the original ID?
-
My thunderbolt 27" display works fine with Mac powerbook 13" 2.8Ghz, however with bootcamp and installed Windows 7 pro 64 bit version installed, the display only has a resolution of maximum 1280 X 800. I updated the graphics driver to Intel HD3000 with no difference. Any ideas how to get the same quality as with the mac os?
Just posted a problem I'm having connecting my Jaybird Freedom and iPhone5 (https://discussions.apple.com/thread/4716045). The Jaybirds connected fine with an iPhone4s and another (forgotten) device so I don't think the problem lies with the Jaybird. I'd be interested if you hear differently.
-
I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else. I tried turning off using both buttons...nothing. Any suggestions?
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem -
when i turn my macbook pro on , the apple logo shows up, but it is just loading. I have tried to turn if off , but the same problem appears. Someone know what the problem is?
Boot into Safe Mode
A Safe Mode boot can take a few minutes compared to a normal boot.
Once you are in Safe Mode open System Preferences > Accounts > Login Items
If you have anything listed there to launch when you startup your Mac, delete all items.
Then go to the Apple menu / Restart.
You can also use Safe Mode to do a "live verification" of the startup disk in case it needs repairing.
Help here > Using Disk Utility to verify or repair disks -
I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.
Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem. -
My ipod will not let me use all but like 3 apps fully without closing me out of the app and i can only use safari or the app store for about 10 seconds without it shutting down the app. This has been happening for about 6 months after the upgrade to ios 4. Please help, should i take my ipod to an apple store?? It is a ipod 2nd generation itouch with ios 4.
We won't know until you try the procedure. The reset will not affect the content of the iPod.
Stedman -
I have an ipod 2nd generation and it only works when i plug it in
okay so i habe this ipod 2nd generation i actually have two and they are both doing the same thing at first i plug them in and the only thing that comes up is the do not disconeect screen but after a while oh fiddling with it i got the screen to go away and i can se my music and videos and i can see that my battery is full now the moment i unplugg either ipod they automatically freeze, the backlight goes out then the screen eventually fades completely away. now while this is happening none of the bottons works and the ipods are not able to be turned on or play at all almost as if there dead. but they are not becuase as soon as i plug them back in everything shows up perfect the battery is fully charged the backlight is on and the butttons work. help please
Sounds like your battery is not taking a charge, I know it shows full with you plug it in. Try plugging it into a wall socket for a few hours and see if the iPod will work on battery power.
-
I have a 2nd generation Ipod.
I have it connected to my computer and see (my name) ipod on my screen.
Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
An Ipod can be synced with only one ITunes library at a time. Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
Then it asks me if I want to delete and sync.
I am not sure what to do for fear of erasing everything I have put on my Ipod.
I would appreciate if someone could help me out.If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
Here is the iPod/iTunes manual from the Apple Support Site.
http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
Have A NICE DAY! -
I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message. What do I need to do now?
iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.
Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
My mail is configured correctly. When I go to view my inbox I get the 'Load More Messages...' with the number of messages showing. I touch the display and nothing happens. I have uninstalled and reinstalled the email account and restarted the device. I can send mail fine as well as view my sent messages. Very confusing.
I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds. -
I have a 2nd generation Ipod with lots of apps (free and paid). I would like to get a 4th generation Ipod but do not know if I will loose all my apps or not? Can any one tell me?
You will not lose your Apps. They can be reloaded onto your new iPod Touch.
-
I have a iPod 2nd generation and it will not charge or connect to itunes
I have a iPod 2nd generation and it will not charge or connect to itunes, I have tried pressing the power button and home botton together and nothing happened.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Also:
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
Maybe you are looking for
-
Help required in F-30 transaction
Hello All, I am having a problem while posting a document throught F-30 transaction. I am posting a RV type of document. I am not populating the assignment field (ZUONR from bseg table). But after completion of the entire transaction/posting the resu
-
Hi, my 2nd generation iPod Touch screen won't work properly (which I got a year ago along with a university special with a Macbook Pro). When I plug it to iTunes, it shows all the info thats in the iPod, but the screen would only turn bright-white fo
-
Hi ! When i tried to upload data from R3 to BW based on generic DataSource ( function module ) , in the monitor i get the following error : Status code : 56. Description: "Idoc with error added" . How can i get more details about the error? How To c
-
Determination dumps with assertion_failed error
Hi gurus, I am enhancing a TM feature and my determination dumps with assertion_failed error. I check ST22 and the dump lies in method /BOBF/IF_FRW_CONFIGURATION~GET_CONTENT_KEY_MAPPING. Below is my determination to set the read-only flag. CREATE OBJ
-
It seems the iPhone does not support WPA Enterprise authentication. That's the only way I can use the wireless at work. Are there any plans to add support? I know Mac OS X supports it just fine. I spend most of my day at work and it'd be a bummer to