HT201274 my phone is lock because i prees wrong password more than 10 times

My phone is lock because i prees wrong password for more than 10 times. I can open my phone what should i do?

Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware. At the end Restore from your iTunes Back-Up or use iCloud to get your data back.

Similar Messages

  • HT1212 my iphone is lock because of entering wrong password

    my iphone is lock because of wrong entering password

    marites rosales wrote:
    my iphone is lock because of wrong entering password
    If you cannot remember the passcode, you will need to Restore the device...
    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • CAM giving error "Locked because of execeeding wrong password attempts"

    Hello,
    I ahve a 6140 managed through CAM. While discovering I have used a wrong password by mistake for 2-3 times. I have the array now registered with the right password. When I try to update the firmware, I am getting an error message " Locked . exceeding wrong password attempts".
    Kindly help me in unlocking the 6140 in CAM so that I am able to upgare the firmware on it.
    Many thanks in advance
    Ushas Symon

    A while ago I had the same problem. I restarted CAM and I could go on with the upgrade.

  • HT1212 how to close apps if your phone is locked because you forgot the password

    I need to close "find my iphone" in order to restore my phone. I don't know how to close this app

    Go to a computer.  Use its internet browser to sign on at http://www.icloud.com
    Go to Find My iPhone there.  Click on your device and choose "Remove This Device".

  • I have locked myself out of my ipod by entering the wrong password to many times now it tells me to plug it in to the computer and go to itunes when i do that itunes says it cant connect because the ipod is locked im lost at what to do about this anybody

    i have locked my self out of my ipod by entering the wrong password to many times now it tells me to plug it in to the computer and log into itunes when i do itunes tells me it cant open my ipod because its locked does anyone know how to fix this?

    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Please Get the iPod Touch User Manual for iOS 5

  • My wife's ipad is locked because she put her password or apple id in wront too many times. it now says connect to itunes. when I connect to itunes it says ipad is locked. cannot go any further. do they not have a safe mode?

    my wife's ipad is locked because she forgot her password or put her apple id in wrong. the screen says to connect to itunes. when I connect to itunes on my computer it says her screen is locked (Duh I know that). How do I unlock it without deleting all her info.

    Hello Butzi1,
    Thanks for using Apple Support Communities.
    Since iTunes is asking your to enter the passcode, and you are unable to access the iPad, you will need to put the device into recovery mode and restore the iPad by following the directions below.
    Use recovery mode
    Follow these steps if you never synced your device with iTunes, if you don't have Find My iPhone set up, or if you can't get to your own computer. You'll need to put your device in recovery mode, which will erase the device and its passcode. Then you'll restore your device as new or from a backup.
    Disconnect all cables from your device.
    Turn off your device.
    Press and hold the Home button. While holding the Home button, connect your device to iTunes. If your device doesn't turn on automatically, turn it on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode.
    Click OK, then restore the device.
    iOS: Forgot passcode or device disabled
    Take care,
    Alex H.

  • HT1267 my phone was disabled because of the wrong passcode, what will i do to open it

    my phone was disabled because of my wrong passcode,

    Do as the manual tells you to do and restore the iphone.
    If you are unable to restore then type "unable to restore " into the search bar at the top of this page by Support and read the resulting help articles.

  • HT1535 my iphone4 got disabled because of entering wrong password. can i have some support related to this?

    my iphone4 got disabled because of entering wrong password. can i have some support related to this?

    Can you read the User's Guide?
    If so, do as it suggests and restore the device.

  • HT1212 my i-pod is Disable ... because i enter wrong password many times... so please give me helpful solution.... thanking you...

    my i-pod is Disable ... because i enter wrong password many times... so please give me helpful solution.... thanking you...

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • My ipad is locked after entring wrong pasword more than 10 times and i did not back up my ipad. now my device is not able be conncted with i tunes to restore or update, i need a help how can i unlock it?

    my ipad is locked after entring wrong pasword more than 10 times and i did not back up my ipad. now my device is not able be conncted with i tunes to restore or update, i need a help how can i unlock it?

    You have to restore the iPad by syncing to the original computer that you synced to.
    This article explains the process.
    http://support.apple.com/kb/ht1212

  • I'm trying to back up my phone and itunes states I can't authorize more than 5 computers with this apple ID, I no longer own any of the other computers I supposedly authorized my account on. What now? I can't back up my iphone.

    I'm trying to back up my phone and itunes states I can't authorize more than 5 computers with this apple ID, I no longer own any of the other computers I supposedly authorized my account on. What now? I can't back up my iphone.

    Use the Deauthorize All command documented in this article, or if it isn't an option, the 'contact iTunes Store support' link at the bottom of it.
    (115000)

  • HT4061 my ipad is blocked, because I entered wrong password many times. what can I do

    my ipad is blocked, because I entered wrong password many times. what can I do

    Restore the iPad from the computer to which the iPod is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPad into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • My iphone is stopping because I entered wrong password what is a solution?

    my iphone is stopping because I entered wrong password what is a solution?

    DEAR ALLAN when I tried many time to opened it with a password it sttoping and there is no space to enter password so what is a solution please 

  • TS3274 my ipad locked because I forgot my password how I can unlock

    my ipad locked because i forgot my passward how i can unlock ? thank you

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • Managed system user locking because of solman_setup wrong information

    Hello,
    Each time I go to solman_setup -> Managed system,
    there are two systems with a red point because of non
    working rfc connection.
    When I reconfigure them (3. connect managed system), I change the
    user/password to connect to the managed system.
    But our solman still connects to the managed system with the wrong
    username and password.
    Then the user is locked in the managed system (too many connections with a wrong password),
    How could I proceed to tell solman to stop using the old username
    password provided?
    Regards,

    Hello Beniot,
    I has similar issue some time back, please have a look at below link.
    RFC error in third step while performing managed system configuration
    reset the password and retry, and try to check dump in both the system, solman and system which you are trying to do manage system config.
    Even after this you are getting error, please paste the screen shot or attach the error.
    Regards,
    Haseena

Maybe you are looking for

  • Error in ALV display when run in background

    Hi All, My program gives ALV Block Display . I am getting an extra ALV block displayed before display of each of my ALV block . However , while in normal execution (F8) , the program is running fine. Can I debug a background job ? Please help.

  • FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

    Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue? I'm running CS6 Production P

  • Labview 2009 I/O assistant issue

    Hi, I'm using labview 2009, and I can't get the I/O assistant to work-everytime I try to run it, it gives me the error message "Measurement & Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from La

  • Can we use a Shared Dist.List in the Header of WF Template as Admin ?

    All, Is there any chance anybody tried assigning a Shared Dist.List in the "EXPRESSION" for the WF ADMIN in the AGENTS of Version-dependent tab. I know we can give a ROLE, Rule, org. unit, job, user etc., but am just wondering if using a Dist. List i

  • Will using Myriad Pro help keep filled files small?

    I am a newbie as far as LiveCycle goes and have a problem with a form I created growing to 10 times the intial size because I used our company standard font Century Gothic throughout the document. If I change all the fields to Myriad Pro (the default