HT201280 How can I rotate a table in "Numbers" ?

I have 'Copy'd a 'chart' to a second sheet, rotated and expanded it for higher resolution and ease of reading.
I then copied a small 3 column x 2 row table, which is linked to the main chart table on sheet 1, onto the chart in sheet 2, showing (and updating) significant figures from the chart when figures are added or changed in the main table.  Unfortunately, while I am able to position the small table strategically on the chart I cannot rotate it like I have the chart, to make it read sensibly.
Can anyone help as to how I may rotate the small table on sheet 2, please ?

Thanks Jeff.   I had investigated doing just as you said but being new to 'Numbers', I could not find the means so I looked for another method and oviously, run up against another stopper. As is the way, 10 minutes after posting the question I spotted the little icons, bottom left of the screen and behold, they work. Thanks again.
There are a number of things in 'Numbers' that seem 'Not to work' for no apparent reason.  In particular the the 'Chart colour' drop-down menu has no effect on anything as far as I can see. I have to use the menu bar.
Thanks also to "Wayne Contello" I did try that but, as you say, all interactiveness is lost. I also tried it in Excel but gave up. To much trouble.

Similar Messages

  • How can I make a table cell extend beyond the page?  The text disappears when the cell becomes larger than the page.

    How can I make a table cell extend beyond a page?  The text disappears when the cell becomes bigger than the page.  I want the table to continue to the next page.

    As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • How can I fill a table of objects from cursor with select * bulk collect???

    Hi All, I have a TYPE as OBJECT
    create or replace type dept2_o as object (
    deptno NUMBER(2),
    dname VARCHAR2(14),
    loc VARCHAR2(13));
    I can fill a table of objects from cursor with out select * bulk collect...., row by row
    declare
    TYPE dept2_t IS TABLE of dept2_o;
    dept_o_tab dept2_t:=dept2_t();
    i integer;
    begin
    i:=0;
    dept_o_tab.extend(20);
    for rec in (select * from dept) loop
    i:=i+1;
    dept_o_tab(i):=dept2_o(
    deptno => rec.deptno,
    dname => rec.dname,
    loc =>rec.loc
    end loop;
    for k IN 1..i loop
    dbms_output.put_line(dept_o_tab(k).deptno||' '||dept_o_tab(k).dname||' '||dept_o_tab(k).loc);
    end loop;
    end;
    RESULT
    10 ACCOUNTING NEW YORK
    20 RESEARCH DALLAS
    30 SALES CHICAGO
    40 OPERATIONS BOSTON
    But I can't fill a table of objects from cursor with select * bulk collect construction ...
    declare
    TYPE dept2_t IS TABLE of dept2_o;
    dept_o_tab dept2_t:=dept2_t();
    begin
    dept_o_tab.extend(20);
    select * bulk collect into dept_o_tab from dept;
    end;
    RESULT
    ORA-06550: line 6, column 39;
    PL/SQL: ORA-00947: not enough values ....
    How can I fill a table of objects from cursor with select * bulk collect???

    create or replace type dept_ot as object (
    deptno NUMBER(2),
    dname VARCHAR2(14),
    loc VARCHAR2(13));
    create table dept
    (deptno number
    ,dname varchar2(14)
    ,loc varchar2(13)
    insert into dept values (10, 'x', 'xx');
    insert into dept values (20, 'y', 'yy');
    insert into dept values (30, 'z', 'zz');
    select dept_ot (deptno, dname, loc)
      from dept
    create type dept_nt is table of dept_ot
    declare
       l_depts dept_nt;
    begin
       select dept_ot (deptno, dname, loc)
         bulk collect
         into l_depts
         from dept
       for i in l_depts.first .. l_depts.last
       loop
          dbms_output.put_line (l_depts(i).deptno);
          dbms_output.put_line (l_depts(i).dname);
          dbms_output.put_line (l_depts(i).loc);    
       end loop;
    end;
    /

  • How can I filter a table from Data Control without enter query

    I have a table from a web service data control based on WSDL.
    I want to filter the table without input query at filter text box. Without filter text box, each would filter the table with a hardcoded query internally.
    For example, when user click A menu button then it filters the table where type = '1' and B menu button filters the table by type='2' and C menu button filters the table by type=' ' .
    How can I filter the table without enter query?
    Could anyone point me to a solution please.
    Thanks.
    jdev 11.1.5
    Edited by: 893364 on Oct 26, 2011 12:15 PM
    Edited by: 893364 on Oct 26, 2011 12:21 PM

    Hi,
    when you created the table, did you try selecting the "filter" option. Select the table and go to the Property Inspctor. In the tool bar of the Property Inspector there is an icon to change the configuration. Its adding filter filter fields for the user to search in.
    Option 2: The data of the Web Service actually is held in the iterators. If you wanted to filter the WebService query, I would not use the WS DC but a JAX-WS proxy in a POJO to fetch the WS Data. Then have the Data Control created from the POJO. You could have a method exposed on the POJO that allows you to filter the internally held data
    Frank

  • How can I insert a table in the header?

    The question is easy: How can I insert a table of one row in the header.
    Thanks in advance.
    Jesús.

    There are multiple versions of Pages in circulation on Mavericks and Yosemite. Telling us which one helps with a more accurate answer.
    If you are referring to Pages v5, then you cannot insert a table into the header or footer, because implicitly, these are table cells too. The discontinued Pages ’09 v4.3 would allow table insertion in the document header/footer fields.

  • HOW can i rotate the loop as many lines of multi line container in BPM

    Hi All
    I have to send an idoc to 2 Receivers by spliting the message.
    Based on the occurance of a particular source segments i need to create those many instance of targets.
    IDOC ---> Rec1 (More than one message instance)
         ---> Rec2  (More than one message instance)
    I have taken messages of Receiver into a multi line container1
    and messages of Receiver 2 into another multi line container2.
    HOW can i rotate the loop as many lines of multi line container.
    Thans
    Prasad

    Hi Raj
    There are two webservices are 2 receivers.
    In the idoc there is specific segment , which occurs unbounded,Each occurence we Need to check the value of a particual field and send to corresponding Receiver.
    For Ex:
    ZE1KONH (1..Unbounded)
       >MSFGN =004 --> Rec1
      >> MSFGN==0009 Rec2
    It could be like , 1 or more segm for Rec1 and 1 or more segm for Rec2
                            all are for Rec1 or All are for Rec2.
    so in the tranformation we need to put all message of Rec1 in corresponding multiline container as well for Rec2. Then i need to send to correspongind Receiver.
    So here i need to send all splited messages to appropriate receivers

  • In PSE 7, how can I rotate my video, which displays sideways, to vertical?

    How can I rotate my video which displays sideways to vertical in PSE 7?
    It's a waterfall, I filmed it vertically, but it displays horizontally. Full Edit doesn't work on film clips and the rotate option is greyed out.
    Thanks for any feedback.
    Kathryn

    PSE 7 is Ps Elements,  not Photoshop.  Try posting in the Photoshop Elements forum, as not many users here are familiar with Elements.
    http://forums.adobe.com/community/photoshop_elements?view=discussions

  • How can I rotate an image in Final Cut Pro X?

    I imported over a thousand pictures from iPhoto to make a slideshow of my trip to California. How can I rotate images without reimporting them?

    Select the photos you want rotated, open the Inspector (command-4). In the Video section of the Inspector, hover your mouse near the Transform and click show if it's not already open. The rotation setting is in there.

  • How can I generate a table of contents from bookmarks

    How can I generate a Table of Contents from bookmarks in Adobe Acrobat XI?

    Something to try.
    Rick Bostein  provided a "Create Bookmark Report" Acrobat Action.
    With this report as a PDF you could insert it at the start of your PDF document to serve as a "TOC". 
    Go here:
    https://acrobatusers.com/actions-exchange 
    Scroll down some.
    Be well...

  • How can I rotate a PDF document when viewing in adobe reader?

    How can I rotate a PDF document when iewing in adobe reader?

    That hardware button can actually be toggled to work either as a mute button, or a lock orientation button. This can be edited at the settings screen.

  • How can I Export dynamic table to bapi,  which is imported from BAPI.

    At first time execution of BAPI , I am getting Items(Table formate) . Again I have export these Items to BAPI. As a Input Table. How can transfer data export table to import table.
    And also I need delete some items, which are come form bapi. Then I need to export .
    Any body can help me to achieve this issue.
    <b>EX.   At first execution of BAPI, I am getting items in one out structure. After that I need to execute same BAPI using these items.</b>

    You'll have to *alias* your columns, not prefix it with the table names:
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[CHE_TEST@asterix1_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • How can I rotate view of a pdf file, like in earlier versions?

      How can I rotate view of a pdf file, like in earlier versions?

    Adobe Reader Touch (Windows Store app with "Modern" UI) for Windows 8 is a relatively new product, which was introduced in December 2012.  Adobe Reader XI, X, or older is a completely separate product - a traditional desktop app with classic UI.  The desktop version has been available in the market for 20 years (!!) and it does not share any common components with Adobe Reader Touch.
    Adobe Reader Touch does not support page (view) rotation yet.
    For Windows 8, you can download and install Adobe Reader XI from the link below.
    http://get.adobe.com/reader/enterprise/
    For Windows RT, you can use Microsoft Reader (built-in PDF viewer), instead.

  • Iation.  When I import it to iMovie 6.0.3 the clip is on its side.  How do I rotate it 90% .  You ten have to turn your head sideways to view it !  How can I rotate the orientation?

    I've imported a QTPmovie 10.03 from my iphone4 in portait orientation.
    When I import it to iMovie 6.0.3 the clip is on its side.  How do I rotate it 90% .  You then have to turn your head sideways to view it !  How can I rotate the orientation in imovie 6.0.3?

    Klaus
    Unfortunately, I did not have any success with this.
    These pages were " not found"
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
    http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169
    and
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    only opened in  http://www.apple.com/
    - it kept deleting /downloads/macosx/video/mpegstreamclip.html .
    However, I googled and found http://tips4mac.blogspot.co.uk/2007/08/rotating-clip-in-imovie-06.html this really helpful..and it worked !
    regards
    BKDB

  • In pages, how can I rotate text ?

    In pages, how can I rotate text ?

    The text needs to be in a TextBox which you can create from the ToolBar and the that can be rotated by control clicking near the top right corner of TextBox and dragging it around.
    Alternatively click on the TextBox > Inspector > Metric > Rotate: enter value.
    Peter
    Greetings from hot, sweaty and beautiful Broome

Maybe you are looking for