HT201300 2.2 hz mac pro i7 15" whats the most ram i can load ie x2 8mb
hi . can i install x2 8mb ddr ram into a 2011 mac book pro ?
Yes.
http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.2- 15-early-2011-unibody-thunderbolt-specs.html
Similar Messages
-
What is the most RAM I can put in mac book pro 15 inch 2.16(2006)?
What is the most RAM I can put in mac book pro 15 inch 2.16(2006)?
Depends. There were two version of the MBP that shipped in 2006 with different max RAM. The quickest way to see which is yours is to use System Profiler to get your Mac's "Model Identifier."
Do "About this Mac" from the Apple menu and, in the resulting window, click "More Info..." That launches System Profler for you.
The answer is in the first screen of Profiler that comes up--"Hardware Overview." Note the second line in this example:
If the Model Identifier says "MacBookPro1,X" you are limited to 2G RAM. Period.
If the Model Identifier says "MacBookPro2,X" you can install two, 2G modules for an installed total of 4G RAM, but the logic board can only access 3.2G of it. That becomes your "max RAM.
Hope this helps,
AJ -
I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?
Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen? -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
HELP - Mac Pro Running Very Slow (After Additional RAM Installed)
I have recently upgraded my Mac Pro (2007) and increased the original memory up to 10 GB 667 MHz DDR2-F8-DIMM.
I also added an optical disk drive as the original would not play some of the newer DVDs/DVRs. Believe me, I'm not much of a do-it-your-selfer, but was encouraged by How-To DVDs on the net on how to install memory and the optical drive.
I am using Mac OS 10.5.8 and the original processor is 2 x 3 GHz Dual-Core Intel Xeon.
Just when I thought all was well, over the last few weeks my MAC has been getting slower and slower. Now, whenever I re-start or shut down, the Mac can take upwards of 5 minutes to come up. It hangs on the blue screen for what seems to be an eternity. Now whenever I use Safari or Firefox, the rainbow wheel spins and spins and this did not happen much before my "upgrade".
If someone would be kind enough to walk me through or educate me on how/why this is happening, I would be very grateful!
Sincerely,
DonDid you try with just the new RAM? what was it, and you added.... 4 x2GB?
Riser A: 2-2-512-512
Riser B: 2-2-512-512
The ideal balance is symmetrical sets of four.
Clone your system and run Disk Warrior, reformat your fastest drive for system, and restore with SuperDuper. Or try starting over with clean install, would be useful as an emergency and backup, especially as it seems possibly overdue for some maintenance.
Make sure you have 30-40% free on disk drive, and add more if you haven't to separate scratch and data from system.
Run AHT and something like Memtest or Rember. Memtest you can run 40 concurrently each in its own Terminal window makes it go fast for even 5 cycles. -
How far is it possible to upgrade a Mac Pro mid-2010 to the maximum extract.
Hello
How far is it possible to upgrade a Mac Pro mid-2010 to the maximum performance. I would be interested how far one could come close to the performance of the new Mac Pro 2013, or is it hopeless.
My computer
Mac Pro
mid-2010
Processor 2 x 2.4 GHz Quad-Core Intel Xeon
Memory 14 GB 1066 MHz DDR3 ECC
Graphics Card ATI Radeon HD 5770 1024 MB
Software OS X 10.9.1 (13B42)
Please excuse my english is not the best because.For what apps?
Okay, you have the slower 2.4GHz processors, most have found that MHz still rule and matter, meaning a 6-core 3.4GHz for some applications (most) was the best and the sweet spot.
So you could upgrade to a pair of 3.2GHz 4-core (cheapest) rather than splurge on two 6-core 3.34GHz (more expensive and more cores).
First thing to do, put the system on a 256GB Samsung 840 SSD.
For photoshop and graphics, invest in some more SSD ($US300 for 500GB) and put those on a PCIe SSD controller ($300 Sonnet Tempo Pro) and put Aperture/Lightroom on one, and use the 2nd SSD for scratch.
RAM: 24-32GB would probably help all but the more casusalist of user.
Tips and articles:
http://www.macperformanceguide.com head to the TOPICS main page and there are dozens of sections each a different area of upgrade and optimization for applications. Storage, memory, how to, use arrays, backup strategy. -
Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP. -
I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it. -
I have a new mac book pro and wan't to install my version of lightroom 5 from my old pc to the new one.
How can i do that? Can't find it here on the site? Thx
[email protected]Hallo, I installed the program as you said. Everything ok.
When i have to give my serialnummer, it is not accepted. Code is not valid he said
1160-4008-7475-7547-5706-0812
Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
www.adobe.com
Hit the Download link at the bottom the page.
Hit Lightroom
Hit Free Trial
When you are done downloading, launch, and enter your serial number from your previous installation.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.
Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...
-
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXYou just now installed 10.8.5? Did you purchase that at the app store?
What is the upgrade being offered?
FWIW, you are not running iOS on a Mac Pro (we are talking about the desktop tower Mac Pro, right?) -
When watching my Apple TV (3rd gen) the picture jumps a few frames every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.
These may be different issues, but lets look at rentals first.
Poor motion can result from mismatched output. If your source is 24 or 30 fps you should set the output of the Apple TV to 60 Hz, for 25 fps content use 50 Hz.
Additionally motion software on the TV itself can cause the picture to jump, check your TV settings and turn off any motion settings in use, -
Can video cards for the new Mac Pro be installed in the field?
Current Configuration of the new Mac Pro is as follows:
ACES MacPro Workstation Seat
Processor
6-Core/3.5GHz/Xeon E5
Memory
32 GB
Graphics
2X AMD FirePro D500
Hard Disk
1 TB
Display
24" LED / HP
Media Player
2GB FIPS USB Drive
Mouse
Apple Magic Mouse
Keyboard
USB
Ports
4-USB 3.0;
6-Thunderbolt
1- HDMI
Netwk Interface
Ethernet/802.11n
Card Reader
NIST SP 800 Compliant
My question is can the Graphic Display cards be removed and replaced in the field by an experience Mac Technician?
Any special tools required?Now here is the back, showing the heatsink paste still in place, and the thermal pads used to cool the RAM chips to the central cooler:
note that the two cards are not interchangeable -- they have their power lugs on opposite sides. One card has chips to support actual display output to the thunderbolt Busses, the other card has none, but has the custom micro-PCIE slot for the PCIe SSD "stick".
One reason for this design is that to make a leap forward, you would have to water-cool the slots for a traditional form-factor PCIe slot Mac pro. Then do it again to include a second GPU. In my opinion, this model Mac Pro is about conquering the cooling problem of this much CPU and GPU compute-power in one box.
NVIDIA graphics card replacements? maybe eventually, but not at this writing. -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering. -
I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.
ErnestNot sure if I'm following you. I have 4 hard drives installed on my Mac Pro. I had a RAID 5 configured and functional for about 5 months. My battery died on the RAID card. I replaced the battery, seated the RAID card back in the slot I removed it from. When I booted to the USB drive to look in the RAID utility, I could see the battery is charged but my volumes are not showing.
The drives don't show in disk Utility. I built the RAID with the RAID Utility and they did show there. I have a early 2008 Mac Pro, Mavricks OS running Mac Server
Maybe you are looking for
-
Will an iWeb gallery work on a non-mobile me server?
I've been using MobileMe's free trial working out a website for my dad's artwork and am close to the end of the trial. I had planned on just going to GoDaddy as I could find no justifiable use of the other features of MMe for myself. Q. Will the iWeb
-
We configured the DME by using the Format MT103, system geteration the MT103 file which one Ok. Now we want tp print the payment advices as well. please guide where to assign the payment advices form after developing from ABAPER.
-
Premiere Pro CS4 is not rendering H.264 Blu-ray videos correctly on my computer. I can save H.264 videos fine, it saves as an MP4, but when I try and do the higher quality one, it gives me a couple different files: An m4v, a wav, an xmpses, and an md
-
This is my second day (since I installed the 10.4.10 update) that I find that my MacBook Pro CANNOT maintain its Internet connection... I lose the ability to send e-mails, browse Internet pages or download anything from the Internet. My wife's comput
-
When I open Apple mail after a while, It will lock my computer up to a constant spinning rainbow. It might take 5 minutes or 4 hours, but eventually it will lock the computer up. I have deleted the cache but still am not getting a solution. Any ideas