HT201300 I have a early 2008 macbook pro and i need a replacement bezel frame for the screen. Where do I find if it is a A1211?

I have a early 2008 macbook pro and i need a replacement bezel frame for the screen. Where do I find if it is a A1211?

http://www.welovemacs.com

Similar Messages

I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge

I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge. I read it may be the charger,
that sometimes is blank, but it does charge my computer.
Anything I can try?
I have updated to 10.9.2
Message was edited by: wplewis

Bring it back to the Apple store with your MBP and charger. If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
Ciao.

I have an early 2008 macbook pro and the apple site says this about the memory...

MEMORY
Logicboard RAM
None
Maximum RAM
6.0 GB (Actual) 4.0 GB (Apple)
Type of RAM Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
How do you get to 6mb of ram? I did a search online and memory cards don't seem to be made in 3g capacities.
thanks,
C

4 + 2 = 6
more info:
https://discussions.apple.com/message/12026687#12026687

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

I have an early 2008 macbook pro (Pre unibody)

I have an early 2008 macbook pro with 10.5.8. The clock will not hold the correct time when the power adapter is disconnected. The main battery is dead. Does the motherboard have a back up battery that holds the date and time or does that function depend on the main batter being in order? Thanks.

rapture_elk wrote:
Hi -
I have an early 2008 (pre-unibody) MacBook Pro with Intel Core 2 Duo 2.5 GHz Processor - is it possible to upgrade it to a faster Core 2 Duo mobile processor? I know this is possible with some PC laptops.
Thanks
Hi: It isn't possible to upgrade the processor. It is not a socketed CPU.
Stedman

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confuse

I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.

To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X

I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384

HT201335 i have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem

have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem

Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 Do you see the AirPlay icon on the menu bar? If not, restart the router

I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear.

I have just bought a Macbook Pro and sync data from my old version onto the new one...However when I tried opening the mail client...Message window does not appear. The old Macbook Pro I was using used Snow Leopard. Now with the new it is a Lion. Toruble now when I click onto new message window I have the spinning icon which show it is trying to load. However it fails and Im left with having to Force Quit it. How can I resolve this problem

Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

Tried the "Apple Bake" on my early 2008 macbook pro and it worked, does that mean for certain it is my Nividia chip that is bad?

So I had my early 2008 macbook pro (A1260) not wake up after clamshell sleep. After researching the boards felt confident it was the logicboard issue. Not being able to afford a replacement I decided to try the "apple bake", as I have been employed as a maintenance tech for a corrugation company and was comfortable doing the work myself. Anyhow it worked (350 degree f - 8mins) and my mac was back to life working as normal except for the fans running at %100 all the time. The fix was short lived, only lasted about 5 weeks and wouldnt wake up from sleep again. (yes, I applied new thermal paste the first time haha) I did the bake again and again it was revived this time fans working properly (still not sure what that was about) I have since had to do it one more time and now I just dont ever close it or let it go to sleep. I found a guy online who will replace the gpu for a good price ($150), my question is, is it actually the Nividia chip thats the issue and not something else? Is there any other issue that would be reolved by doing the bake and Im just thinking its the faulty 8600 geforce chip?
Macbook Pro 4,1 - 10.6.8 - 2.6ghz Core 2 Duo - 4gb 667 Mhz DDR2 SDRAM
Other issues I had aside from not waking up from sleep
-Strange feedback noise coming from speakers in between any audio being played. (intermittent) any audio will stop the noise. (might be unrelated)
-Dark lines from bottom of screen to top. Screen reset will fix (shift+cntrl+eject)
-Pixeleation when gaming (intermittent)
Any help would be appreciated,
Thanks in advance

So I had my early 2008 macbook pro (A1260) not wake up after clamshell sleep. After researching the boards felt confident it was the logicboard issue. Not being able to afford a replacement I decided to try the "apple bake", as I have been employed as a maintenance tech for a corrugation company and was comfortable doing the work myself. Anyhow it worked (350 degree f - 8mins) and my mac was back to life working as normal except for the fans running at %100 all the time. The fix was short lived, only lasted about 5 weeks and wouldnt wake up from sleep again. (yes, I applied new thermal paste the first time haha) I did the bake again and again it was revived this time fans working properly (still not sure what that was about) I have since had to do it one more time and now I just dont ever close it or let it go to sleep. I found a guy online who will replace the gpu for a good price ($150), my question is, is it actually the Nividia chip thats the issue and not something else? Is there any other issue that would be reolved by doing the bake and Im just thinking its the faulty 8600 geforce chip?
Macbook Pro 4,1 - 10.6.8 - 2.6ghz Core 2 Duo - 4gb 667 Mhz DDR2 SDRAM
Other issues I had aside from not waking up from sleep
-Strange feedback noise coming from speakers in between any audio being played. (intermittent) any audio will stop the noise. (might be unrelated)
-Dark lines from bottom of screen to top. Screen reset will fix (shift+cntrl+eject)
-Pixeleation when gaming (intermittent)
Any help would be appreciated,
Thanks in advance

Early 2008 MacBook Pro and lion

I have an early 2008 MacPro, would lion be a good purchase or it would slow down my computer ? I am wondering if it is a waste of money ?

My workmate just installed Lion on his 2.6Gig 2008 MBP and is complaining that it slowed his machine. Everything seems to work ok, but he said there is a noticable slow down.
If you decide to try it, I would suggest doing a full time machine backup to another disk before the upgrade, incase you want to revert back.
Regards

Just updated from a late 2008 Macbook Pro and I am getting a blink on my external screen

I just upgraded from a late 2008 Macbook Pro with a AMD Radeon HD 6770M 1024 MB graphics card and I am now getting a blink (black screen) every few seconds.
Anyone know a fix.
Thanks

You could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
But it's worth a try...
Clinton

Hello, I have a early 2008 Mac Pro and it won't boot even with SL DVD

My Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM) won't boot. it gets to the grey screen/ Apple logo and hangs on the logo for a few seconds then flashes either the question mark folder icon or on the circle-slash icon () for about half a second then the logo for a few seconds and repeats. It will go into Target Disk Mode (T) but not Diagnostic Mode (D)
Here's what I have done to try to fix it:
unplugged all peripherals
tried to force DVD boot holding C (checked disc for errors on SL iMac)
removed all HDDs and rebooted holding C, plus a combination of having some in/ some out.
removed first DVD-ROM and used second drive
removed second DVD-ROM and used first drive
held shift during startup
held option during startup
removed graphics card
put HDDs back in with GFX card out, plus combinations
put only the boot drive HDD in (not time machine or 3rd HDD)
put blank HDD in and booted DVD
put mac formatted (used iMac to format) HDD in and booted with DVD
used an G4 USB keyboard again for all of the above
All of this has not worked so I am stuck with what to do. It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area, but I made sure it was using the 3rd HDD I had put in the machine a couple of days before so it shouldn't be interfering with normal operations. I had also formatted it to NTFS earlier but reformatted it on the Mac Pro to Mac OS Extended - I don't know if this is even relevant.
Any suggestions (except taking it to a Apple repair centre as I can usually fix anything myself!)
Thanks.

Go to System Profile and look, does it say "MacPro3,1"?
That is 2008.
FBDIMM would be 800MHz. Did you use older slower 667MHz in yours?
You can but take a hit in performance.
Sounds like MacPro1,1.
Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM)
In 2007 March an 8-core 3GHz did come out 2,1.
So just to be clear.
===========
It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area,
Whenever you want to install Windows, remove all the drives other than the one Windows goes to. And if you use a dedicated drive YOU DO NOT NEED Boot Camp Assist, unless you use XP, which really is limited and crippled (one processor, 1.9GB RAM support).
And when it freezes, your only choice is to nuke (reformat) and restore or get out that backup CLONE you made before (ie, Step #1 in the Boot Camp Guide).
Sure that whole NTFS / MBR / GUID could be an issue, but you should just have a blank drive or clone.
No don't bother Apple, they seem to not have a good sense about Windows on Mac Pro anyway.
Other than zap pram from cold boot / tried booting with NO drives inside and just 10.6. DVD - should be fine.
You should be fine iwth Windows 7 DVD and one drive, or even XP.
Make sure you take your time and reconnect cards etc properly and any cables.
Booting from OS X DVDs may not work if there is a drive with a totally shot directory or partition table. Put them in FW case and turn on AFTER OS X is booted.
Why aren't people Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.2
How To clone

HT201300 I have a early 2008 macbook pro and i need a replacement bezel frame for the screen. Where do I find if it is a A1211?

Similar Messages

Maybe you are looking for