HT201302 What if I dont use a USB cable but rather use wi-fi ?

I read all the instruction but there are none for wi-fi. I need to move images from my iPhone to iPhoto.

Wifi Syncing will not transfer pictures from iPhone to the computer.
Dropbox is a Cloud based service. Its basically a service that gives you a specified amount of storage space in their servers, and you can upload files to it, and then download from it.
There is an App in the App Store for it.
What you do is upload the files to a server on the internet, which you can then access form your PC.
Wifi Photo Transfer Apps let you skip the upload and subsequent download steps to and from the cloud server by transferring directly to the computer.
Again search for Wifi Photo Transfer.

Similar Messages

HT201441 I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but st

I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but still no go. How do I activate ipad mini with my iTunes ID.

delete the email account and try again

What is the thickness of the USB cable?

What is the thickness of the USB cable?
I am interested to know the thickness of the 5V cable inside the white 1m Apple USB.
Thanks.

typical wires inside usb cables are 1mm think
but this is a user forum so you're not getting official apple info
just a hunch
unless you have somebody who canabalize apple usb cables alot to reply

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

I plugged in USB cable but not showing connected status in my ipod 4th generation

I plugged in USB cable but not showing connected status in my ipod 4th generation

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.

Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.

Hi
Chamie7 wrote:
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.
I presume that you mean that the switches do not light up as appropriate when you select a Patch in MS?
If so, in Layout Mode, select each of the buttons in turn, and check that they are a) Assigned to the correct MIDI CC number etc, and b) that "Send Value to" has the correct Port selected.
CCT

Hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone helphi just

hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone help

Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414

ITunes has quit recognizing my iPhone as a device. The computer still dings at me when I plug in the USB cable, but the program is failing to show my phone as a connected device. How do I fix that??

iTunes has quit recognizing my iPhone as a device. The computer still dings at me when I plug in the USB cable, but the program is failing to show my phone as a connected device. How do I fix that??

I think this article will help you.

How can I use my Dx7 as a MIDI controller for Logic Pro 9? I'm using MIDI/USB cable but Dx7 doesn't appear in the 'set-up' list, what am I doing wrong?

I'm using Logic Pro 9 - 9.1.8
MacBook Pro Retina OSX 10.9.3
DX7 2 FD connected to my laptop with a MIDI/USB cable
When I click the 'scan all models' search in the 'Control Surfaces Set Up' there is no Yamaha DX7 in the list so how can I make Logic 'see' the DX7?

As Colin pointed out, you have to look first in the Audio MIDI Setup. If your MIDI Device doesn't show up there, then Logic cannot see it either (unless you are using Logic Remote on your iPad to play over Wi-Fi).
I'm curious about the "MIDI/USB cable you mention. If the DX7 has a standard 5-pin DIN MIDI out jack, then you have to connect that to a MIDI Interface first that converts the MIDI signal to send it over the USB jack out. Please note that you would see the MIDI Interface in the Audio MIDI Setup app and not the DX7 itself. Also, in Logic you would see the MIDI Interface in the Environment as a valid MIDI input device.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

HT202157 i have just selected to upgrade my existing apple tv and it went through the download and now asking me to plug into a USB slot. I dont have a USB cable that goues into Apple TV. Is there a way to bypass this or have I got tyo go out and get one

to add to my upgrade question (during which asking me for USB connect I dont have) Not sure if it is an Apple TV 2 - no markings to suggest, but bought 7 months ago

when the system crash in a way that require the firmware to be reloaded from itunes
it will require an micro usb cable this is a very common cable all smartphone apart from iphones use that type of cable to sync and charge with

HT201302 The USB cord needed to transfer photos from my iPhone 5 to Windows XP has nothing to do with the charger cord, which appears to be an USB cable, but is not?

The USB cord needed to transfer photos from my iPhone 5 to Windows XP has nothing to do with the charging cord which appears to have an USB 'end', but apparantly is not, as it will not fit into any USB port on my PC?

An iPhone 5 comes with a single cable. It is a USB to Lightning connector cable that is used for charging, for syncing, and for transferring photos from the Camera Roll to your computer. There is no separate cable for charging.

I just had Uverse installed. The iMac which was my base station is now connected via my household electric ground connection. Another computer is now the base station. I have connected my Time Capsule to my computer by USB cable, but can't set it up

I just had Uverse installed. My iMac desktop has been the base station for my wi fi, but we had to connect it via ground wire of my electrical system and use another desktop as the base station [with windows op system]. We have connected my Time Capsule to the computer via USB cable. I believe that will require setting up the Capsule to use Ethernet, but the instructiions on the install disc only talk about using Airport. How can I find instructions for setting up using USB cable and Ethernet?
Thanks!
Charles Leach

All the manuals are listed at the head of the thread.
https://discussions.apple.com/community/wireless/time_capsule?view=overview
The TC cannot connect to the computer by USB.. it is network device.. it only connects by ethernet or wireless.. usb is for external drive or printer.

I just bought a new Epson projector, connected it to my Mac with a USB cable but can't get anything to display. Any suggestions?

I just bought a new Epson projector, connected it to my Mac with a USB port and can't get any display. Any suggestions?

USB is not a Video Interface. to use it with this projector, you must have downloaded and be running:
Macintosh
USB Display v1.50
Mac OS X (v10.7 - v10.7.x), Mac OS X (v10.6), Mac OS X (v10.5)
epson14423.dmg - 2.9MB - posted on 10/24/11
This file contains the Epson USB Display v1.50. This software, along with a USB cable, allows you to display images from your computer to your projector.
Installation instructions:
Double-clicking this file creates a disk image on your desktop.
Open the disk image.
Double-click the installer icon to begin the installation.
Download Now
I think it may be superior to get a VGA or HDMI adapter and use the display features built into your Macintosh.

When starting iPad get one icon of iTunes and shows USB cable but IPad doesn't launch

My son tried to upgrade our iPad to iOS7 last night and this morning when attempting to turn device on all we get is an iTune icon and picture of USB cable and nothing works. Any ideas how to fix this

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

My iPad charger banged and now doesn't charge my iPad have tried other USB cables but nothing

Looking for some info on my charger for ipad2. It banged lat night and now won't charge my iPad have tried different USB cables in it but nothing happens

The iPhone charger will likely work, but will be MUCH slower than the one that came with the iPad.
Check the apple online store. You can purchase them.

HT201302 What if I dont use a USB cable but rather use wi-fi ?

Similar Messages

Maybe you are looking for