HT201303 Please help me to check my acc: i cannot find where i can change the question security.
i cannot find the button which i can change the question surcurity. please help me
<Email Edited by Host>
http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH
Similar Messages
-
I need help to find my photo's please (2500) on my backup drive.Lost them after doing a clean install of Mountan Lion I have tried to find them but had no luck. I use Time Machine with a 1TB Western Digital usb drive. Thanking anyone in anticipation of a solution.
-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this? -
Please help me to check whether it is right
I‘m studying the Labview and trying to finish a VI, but I don't know whether it is right? Please help me to check it.
My VI is frequency modulation that 30Hz baseband modulate 9960Hz Subcarrier, and they phase is 1.
Attachments:
Subcarrier FM.vi 19 KBI‘m studying the Labview and trying to finish a VI, but I don't know whether it is right? Please help me to check it.
My VI is frequency modulation that 30Hz baseband modulate 9960Hz Subcarrier, and they phase is 1.
Attachments:
Subcarrier FM.vi 19 KB -
I recently purchsed Black Hawk Down but can not find it anywhere in my purchase history and have cant seem to find where i can download it again without being charged? Please Help!
Hi..
Check your debit or credit card account to see if the transaction went through, or if you purchased from the balance of a redeemed gift card, see if the amount of purchase was deducted.
Account Home - Apple Store (U.S.) -
Please help my mac is so slow coming up and going to different places. the flower keeps coming up all the time?????
I'm having this problem but only online. I've confirmed that it is the computer (2007 MacBook), and it only happens when I'm using wi-fi connection. My other MacBook (2010) is connecting with wi-fi fine, and when I plug this MacBook into the ethernet connection it is also doing fine. I've re-started, check the memory, deleted cookies, histories, gone as far as uninstalling and re-installing browswers. Used the System Preferences network diagnostics and got an "all good". Ideas appreciated.
-
My computer crashed before I was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my program again. I have projects that I cannot access. Please help!
I wish I could help, but I am in a similar situation.
I need to deactivate it because we are getting rid of the computer it is on and are buying a new one. When I go to Help there is no Deactivate option. The only options are: "Help", "Hide Coach", "Tip of the Day", "Adobe Website", "Technical Support Website", "Frequently Asked Questions", "Check for Updates", "Register", "Download e-License..." (Greyed out), "Return e-License..." (Greyed out) and "About Adobe Visual Communicator 3". I spoke with support through chat and they said my product was no longer supported.
Patrick -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
please help me on this, what happened was that i connected my ipad to the computer and the itunes library was empty although a week ago i had 48 apps on the itunes library
see my main ques was that i have an ipad 2 in which i have 48 apps and i hv made an itunes account in my computer in which i can backup my purchased apps and i had backed up36 of them so that i can delete them from my ipad if the memory is full but recently when i opened my itunes account in the computer it tells that you dont have any app on this account whereas on my ipad i still do have them, so cant i get all my backed up apps on the itunes account on my computer again?
-
I have an old version of InDesign CS5, have not used in a while..about a year. It will not load nor allow me to uninstall and reinstall, please help. I have original discs and serial number. How can I fix this?
CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
-
Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?
See if any of the following fix it.
Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
When I try to download games eg. Dreamland HD light it says the following: your request cannot be completed. Please help.
Honestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.
Hold shift key down while booting should get you in
go through this list and get back with me
Step by Step to fix your Mac -
i have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me apple.corp and please tell me if this is not possible to be done it almost a month that i cant use my iphone.
thank you for those who read this
<Email Edited by Host>Remove your email address. This is a public website, and you are addressing thousands of strangers.
After doing that, tell us what your issue actually is. This is a user-to-user technical forum. You are not addressing Apple here. -
My macbook crashed about two weeks ago and I had icloud already set up. How do I go about retrieving the music and images? Please, help me. I had over 10gb of music on that computer and the only place it was backup was icloud. Thanks.
I hate to say this, but unless you are paying the 25 bucks you cannot back up your library to the cloud.
All you can do is back up the items you "purchased" from Apple.
iTunes Match
For $24.99/year you’ll get access to all your iTunesmusic including tunes you ripped from CDs or “borrowed” from anonymous friends. It scans your library to see if the song exists in iTunes’ 18 million song catalog and if it does it’ll stream it to you at 256 kbps. If your song is not in iTunes then it’ll be uploaded to iCloud at whatever rate it is on your device where it can be streamed for your listening pleasure. I cannot find any information on how to restore a library, however
Best of luck
Maybe you are looking for
-
No ManagedConnections available in JBoss
I want to add removeAbandoned tags to mysql-ds.xml. Is it correct way, pls let me know. mysql-ds.xml file contes : <?xml version="1.0" encoding="UTF-8"?> <!-- $Id: mysql-ds.xml,v 1.1.2.1 2003/12/12 19:19:56 starksm Exp $ --> <!-- Datasource config f
-
Database error number 17003 has occured
we are using oracle 9.2.0.1.0 database . on top of that we are usinm maximo 5.1 application . but when we try to do insert or select action we will get this error. database error number 17003 has occure.please contact your system administrator for ad
-
I recently updated iTunes and when I went to put music on my iPod, however, iTunes could not pick anything up even though windows was. I then tried my iPhone and I had the same issue. I have gone through the steps off this page http://support.apple.c
-
Switch from monthly CC Ps & Lr membership to Complete CC membership for Students and teachers
Hi, I would like to switch from a limited monthly memberschip to a complete monthly membership for students and teachers. How can I upgrade my actual membership? Kind regards, Danielle
-
How do I un-embed a youtube video? I deleted the youtube video from ibooks author on my iMac, but it won't delete from the ipad ibook view. It shows up in my book as a blank bar until I tap it, then it plays the video. I made a new page after deletin