HT201304 Any one has tried to connect I pad to LCD tv??? Please suggest way for same....

Can any one suggest how to connect iPad with LCD tv for see photos or using big screen...then iPad??
Can you suggest how can be connected??

Hi there.  I connect mine to my TV with the apple HDMI adapter, and it works perfectly.  great way to watch movies from itunes.

Similar Messages

  • Does any one has the Nuance version 9.0.3, 4-ports evaluation license file for share?

    try to setup IPCCX8.0 with ASR feature. but do not have Nuance 9 license, I have send the request to Nuance sales. but no reply.

    Hi Kevin,
    I have the same issue while preparing the CVPI 8.0 training.
    The products are no longer available in Nuance Website and no one from the sales answered me !
    Any idea ?
    Thanks !

  • I've updated my iphone 4 (gsm) to ios 6.0.1 and after that it's stuck in recovery mode (itunes logo cable), i tried many solutions but nothing works, did any one has an idea about this , thank you

    i've updated my iphone 4 (gsm) to ios 6.0.1 and after that it's stuck in recovery mode (itunes logo cable), i tried many solutions but nothing works, did any one has an idea about this , thank you

    I should add that this has never been Jailbroken. I keep reading that a lot of times this is the case for a jail broken phone.
    I have also gone through the not very helpfull steps on apples site to fix this.. It is not a security issue since i dont have an antivirus or any 3rd party software for my computer.

  • HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

    I used Inkscape on Linux before moved to Mac. Now I am trying to install it
    using MacPorts, but libpixman has some problems that has been reported out there.
    Does any one know how to fix it without the need to use other way than MacPorts?

    Start with this comprehensive troubleshooting article:
    https://discussions.apple.com/docs/DOC-3521
    Look at this one for possible solutions:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

    I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?

    Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
    You'll get the help you need in that forum.

  • I am using systec usbmodule1 to send and receive CAN messages , is any one have tried this in labview?, if yes can you send me the code thanks

    i am using systec usbmodule1 to send and receive CAN messages , is any one have tried this in labview?, if yes can you send me the code
    thanks
    Solved!
    Go to Solution.

    Hey,
     All of our CAN drivers have been written for National Instruments' CAN hardware (referenced here : http://digital.ni.com/public.nsf/allkb/E2C6ED025C7​98C5586256F4E00520448 ). Thus, you will have to code all your communication manually, unless Systec provides a LabVIEW driver. There might be various dll files that Systec provides for communication, which you will be able to access through LabVIEW. Take a look at the Call Library Function Node, which can be found from the Functions Palette under Connectivity -> Libraries & Executables. Here you can call a dll file, and also the individual functions within that dll.
    I would suggest posting your question either to the LabVIEW forum, as previously mentioned, or to the CAN forum found here : http://forums.ni.com/ni/board?board.id=30
    Justin E
    National Instruments R&D

  • Have a bluetooth issue, my iphone 5 is not finding any bluetooth divises. trying to connect to bluetooth hands free but its not searching the divice. what do i do to connect bluetooth headset.

    my iphone 5 is not finding any bluetooth divises. trying to connect to bluetooth hands free but its not searching the divice. what do i do to connect bluetooth headset.

    have you tried toggling bluetooth off/on again? if so, try doing a hard reset:
    Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
    If that doesn't solve the issue, you could also try backing up the device and restoring the device as new. 
    In that case, follow the steps in: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup. If you still can't detect or pair with any compatible bluetooth device you should offer the device for service.
    If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
    Using his article will erase everything on the device, so make sure you have a backup!
    Good luck

  • With OS X10.9 the Mail window (after hitting reply or forward) grows ridiculously long, sometimes 4 times the width of the screen and would not allow me to readjust the window size. Any one has the same problem? How shall I go about fixing it? (Thanks)

    With OS X10.9 the Mail window (after hitting reply or forward) grows ridiculously long, sometimes 4 times the width of the screen and would not allow me to readjust the window size. Any one has the same problem? How shall I go about fixing it? (Thanks)

    I'm having the same problem.  I've tried going into the Library and deleting the mail plist file(s), which fixes the problem, but only temporarily.  Would appreciate any help here too!

  • I have 200  forms designed in Designer 7.1. If I upgrade my designer to ES4, will I face any potential issues? Any one has done it before? what challenges we might face?

    I have 100 forms designed in Designer 7.1. If I upgrade my designer to ES4, will I face any potential issues? Any one has done it before? what challenges we might face?

    Hi,
    A couple of problems we've had is Designer setting strict scoping on by default (it you added dynamic properties to JavaScript form objects as the garbage collection changed) and the way we used 'proto' elements (or form objects that show up under "reference nodes" in the hierarchy)
    These blogs might help
    http://forms.stefcameron.com/2008/10/28/target-version-tutorial/
    http://blogs.adobe.com/formfeed/2009/06/enforcing_strict_javascript.html
    Regards
    Bruce

  • My mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do didi any has same issue?

    my mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting>general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do did any has same issue? if i do an complete phone restore what will hapend ?

    You can call Verizon to replace it or go to an applestore to replace it since it won't even power on with multiple chargers.

  • Does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please!

    does any one know how to connect itunes up? when i click on store it always says 'itunes could not connect to the store. Make sure your network connection is active and try again.' if you know how to fix tell me please, please! thanx

    Work through all the troubleshooting here: iTunes: Advanced iTunes Store troubleshooting
    B-rock

  • I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version

    I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version? Please advise. Thanks in Advance.

    Hi Syednz,
    If you are looking for the BootCamp Support Software for your MacBook Air, you may find the following articles helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Apple Support: Boot Camp Support Software 4.0.4326
    http://support.apple.com/kb/DL1636
    Regards,
    - Brenden

  • I need to use sigma plot in my Mac, does any one has a good advise for alternatives. If not, will it be ok to install windows in my mac?

    I need to use sigma plot in my Mac, does any one has a good advise for alternatives. If not, will it be ok to install windows in my mac?

    See if Deltagraph is still around.  We used to use that for plotting scientific data on Macs.  I don't know if it is at all transferrable with Sigmaplot if you have a colleague who uses it, but if you're doing this on your own I would look at getting DG vs, doing a dual boot  etc.

  • Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

    Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Any one has sample code of Multi-Thread Embbeded SQL in C ?

    We want to write multh-thread code using Embbeded SQL in C.
    The Open Client version is 15.7 SP100.
    The Sybase Document : "Embedded SQL/C Programmers Guide (Open Client) " said it supports Multiple SQLCAs,
    but has no sample code about this.
    Any one has sample code of Multi-Thread Embbeded SQL in C ?
    Thanks!

    Hi,
    I am asking around and will see if anyone has anything. Please note this though:
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc00371.1570/html/sdkrblnx/sdkrblnx39.htm
    Thanks,
    Dawn Kim

Maybe you are looking for

  • MSI GT72 2QE BIOS Unlock and vBios GTX980m unlock

    Hey guys, searching for an MSI GT72 2QE unlocked BIOS with all possible voltages, like in XTU (see: ) Offset voltage, processor cache voltage, digital IO voltage Oh and Graphics voltage for the integrated HD 4600 is very important for me (also integr

  • Control a LabVIEW GUI exe from LabVIEW

    I have a vendor supplied LabVIEW.exe application, it's used to control a device that's part of an automated manufacturing process.   At present we need to manually run the exe from the control PC , read data, make a decision, then input a few values,

  • BDC for QS41 : edit Catalog

    Hi, I want to create BDC for QS41 : edit Catalog, Can anybody suggest me with coding ... Thanks naresh

  • Wat do these fields in scdo stand for?

    when we goto scdo transaction and create an object ,we enter the table for which we create the object,there we also have an option as 'copy as internal tab' and 'doc  for individual fields at delete' and also the' name of reference table'. what do th

  • Application Manager shows 'Install' next to apps already installed

    I have been using CS6 apps as part of a Creative Cloud subscription since not long after CC was released. I have only installed the apps as part of CC. However my AAM window shows a blue Install link next to apps (eg ID, PS, AI, Acrobat) which I use