HT201304 I just can't figure this out . how can I do a restriction on my ipad help me please

And I cannot get rid of games the once that being downloaded help please

You can set restrictions via Settings > General > Restrictions e.g. hide Safari, iTunes, music or films/TV programmes via their age rating. If you are having problem doing that then what exactly are you trying to do and what happens when you try to do it ?
To delete an app, press and hold any of the apps on your iPad's homescreen and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the apps shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

Similar Messages

WHY!!!!! I can't figure this out

Why my girlfriend is getting the message that her "remote IP address is invalid" I can't seem to understand or figure this out...

They should turn off Internet Sharing in System Preferences > Sharing if it is On
Are either of you running Internet Sharing? If so, turn it off.
They should not be letting Parallels connect using the Mac's IP if they run Parallels.
Do either of you use Parallels Desktop or VMWare Fusion to run windows on you Mac? If so, turn off their access to the internet in their settings or preferences.
They should not be connected to the Router via wireless (Airport card) and Wired (Ethernet) at the same time.
Are either of you connected to both Ethernet port and Airport wireless at the same time. If so, disable one of the network configurations. Either unplug the cable or turn Airport off.
They should not have two DHCP servers in a modem and router on their LAN.
How are your router and modem configured. If they are both distributing IP addresses, then you need to either set your router to bridge mode or set the modem to assign just one IP address. I don't know what hardware you have, so I can't begin to tell you how to configure either. Unless it is an Airport Base Station, most modems and routers are configured through a Web interface. Airport Utility will let you configure the Airport Base Station.

Hello! I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working? As soon as I shut down Firefox, they start working again. Please help! Thanks!

Hello!
I just figured this out.....When Firefox is open, my Illustrator CS2 modifier keys stop working?
As soon as I shut down Firefox, they start working again. Please help!
Thanks!
== This happened ==
Every time Firefox opened
== Not sure.

Try to create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How can I figure this out?

Very simple function, but as a beginner, it's still difficult for me.
my mouse wants to detect boxes on the canvas and return the center coordinate of these boxes, how can i figure this out? The game will be, if point(x,y) is inside a box , return box Center

I just noticed that you are placing them on Canvas and it is not a container object. One solution would be to keep track of boundaries of those clickable areas and whenever a click occurs, a check which box was clicked, if any. I hope this helped.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Can't figure this out- cable connection vs wifi connection

Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan Schmidt

Am having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out.

Can't figure this out: locating a MBP on the same wifi network

Can't figure this out: when my 13" MBP is connected wirelessly to my Airport base station, my iPad can see it. When I connect the MBP to the base station via ethernet cable (for faster connection), the iPad can no longer see it.
Note: my airport is not connected to the internet. I'm simply wanting to setup a closed network for the iPad to connect to the MBP. There's nothing else on the network. The app on the iPad is locating the MBP by ip address so it must be a permanently assigned number.
Message was edited by: Alan Schmidt

Am having the same problem.
Everything was working fine until yesterday.
Now if I connect my iMac to the Extreme with Ethernet the Airport is not visible and I can't connect to the internet.
iPods and iPhones can still use the wifi to get on the internet.
If I switch the iMac to Airport it works, but, will not work with the Ethernet cable connected.
Have tried changing ethernet cables and still no go.
Can't figure this out.

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube. What kind of router you have? I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.

In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

The switch is in the upper right of the viewer.

Trying to renew my subscription and can't seem to figure this out, my plan doesn't need renewed until feb 2015 so its not giving me the option to manage my account. Creative cloud isn't giving taking the $ off my credit card why? The $ is on my credit car

trying to renew my subscription and can't seem to figure this out, my plan doesn't need renewed until feb 2015 so its not giving me the option to manage my account. Creative cloud isn't giving taking the $ off my credit card why? The $ is on my credit card. Thank you.

Log out of your Cloud account... Restart your computer... Log in to your Cloud account
or
Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html

My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!

My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!

Thanks so much Meg. Unfortunately, iTunes is the program I use to perform syncing. I don't really have other outside options. It is also the location of the backup I would use to restore my phone, and my only way to reclaim important data. I am concerned that, since the last backup occurred when the "other" bar was only moderately huge (around 29G I think), that a backup would replicate the problem back onto my phone.
My contacts, etc. are all in address book and the calendar app on my Mac. As far as I know, iTunes is the way to get them back, but iTunes is where the problem is.
Any thoughts on this?

When I updated my Iphone my naviogon app was erased, and I can't figure which one I had purchased. Does anyone have any ideals how I can figure this out.

When I updated my Iphone my naviogon app was erased, and I can't figure which one I had purchased. Does anyone have any ideals how I can figure this out.

App Store > Updates > Purchased > Not On This iPhone.
Should be in the list.
tt2

Coldfusion unexplainable duplicate issues, cannot figure this out!

So I've been fighting this for days. I dont have the slightest idea where I can go from here. I have your standard coldfusion insert queries set up to insert new data into the database. Something along the lines of:
Select * from table where tableuniqueID = Form.UniqueID
Cfif databasecheck.recordcount EQ 0, then insert new row with form.uniqueID as the uniqueID. Well recently, its been throwing the generic Violation of PRIMARY KEY constraint 'PK__OLMS_Dat__9C04DA075F0A3F61'. Cannot insert duplicate key in object 'dbo.table'.
I dont understand that in the slightest, the only way it inserts is if the query right above it is defined and equal to 0 recordcount.
I did some tooling around, and found someone suggesting to insert into my SQL "IF NOT EXISTS" to have SQL do the actual check to see if data exists. Well we put that in place, and just recently, ANOTHER duplicate happened, same error, cannot insert duplicate showing the new SQL structure.
This is beyond me. I have two statements checking to see if it exists and, yet, Coldfusion still tries to execute a database insert. What is going on?? Any ideas? You would figure this would be the basics.

Hello. I know it's been awhile but did you figure this out? I have a very similar thing happening. Something along the lines of
INSERT INTO WorkSheet (CODE_KEY)
SELECT TOP (1) EI.CODE_KEY
FROM EmpInfo AS EI LEFT OUTER JOIN
WorkSheet AS WS ON WS.CODE_KEY = EI.CODE_KEY
WHERE (EI.CODE_KEY = 'param1') AND (WS.CODE_KEY IS NULL)
where the field "CODE_KEY" is a the primary key in SQL Server 2008. This is similar to what you're doing except that the check for an existing value happens as part of the insert query. Just like you every once in awhile I get the "[Macromedia][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint" error. I'd say I get one a week.
The only hint I have is that there is an insert that succeeds. This insert happens at the same time as the one that fails. That seems that the code is executing twice at the exact same time which seems impossible. In fact it seems to me that a second query would have to happen so fast that the join shows no value (otherwise I'd get records updated = 0 rather than the error) but then the first (successful) record is created prior to the 2nd one being inserted.

HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
I've tried everything to get a custom umask set for all apps. It just seems impossible...
Is there a replacement for launchd-user.conf?

Please file a bug report: https://bugreport.apple.com
I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

HT201304 I just can't figure this out . how can I do a restriction on my ipad help me please

Similar Messages

Maybe you are looking for