HT201304 Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

you might be able to block it if the app uses Internet access
and depending on your wireless you might be able to block a specific user
accessing the backend host that the app uses
some firewalls offer application filtering but I'm not aware of any that work with ios apps

Similar Messages

My ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was i

my ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store, safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was incorrect when it was correct, please tell me as I do to let me access youtube, safari, app store, i tunes...
thanks

- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

How to find the list of plants that a user has access to

Hi,
Can any one help me pull all the plants that a user has authorization for?
Is there any fucntion module that gives this list or any table from where i can pull this?
Please let me know.
Regards,
Kumar.

Looks like this FM is only giving the list of all users who has got authorization to a specific autho object say M_EINF_WRK (plant).
But my requirement is; i will pass my user id and it should give me all the plants that i have access to.
Please suggest.
Regards,
Kumar.

BO SDK Query to find all folders that a user has access to

Hi Experts
Please help me on BO SDK Query to "find all folders that a user has access in a single query".
I am tried trial & error using PARENTS & CHILDREN. nothing worked
Please advice
Thanks!
Prasath

Hi Aasavari
I am checking BO Web services samples and .NET samples. Please advice me the correct files to check the user/folder rights.
Thank you so much
Prasath
http://wiki.sdn.sap.com/wiki/display/BOBJ/NETWebServicesSDKSamples

Is it possible to restrict access to individual SharePoint Online sites (or site collections) to users only connecting when on the corporate network?

Hi,
We have an Office 365 environment which is linked to our on premise ADFS environment. We have started to make some deployments of sites to our SharePoint Online environment. For the majority of sites this is great and the ability to access the sites
from anywhere is a real bonus. However, there are some sites and data that I would be much more comfortable in migrating to SharePoint Online if there were a way to make them only accessible via users/computers connected to the corporate network.
I have seen articles in how you can configure ADFS to allow all connections to the Office 365 tenant only from the network or not but what I am after is something which can be configured on a site by site basis (i.e. not the whole Office 365 environment
or SharePoint Online environment) to only allow access when connecting from the corporate network.
Any advice/help would be much appreciated?
Many thanks
Paul

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to SharePoint online, I recommend you post your question to the Microsoft Office 365 Community Sites and document sharing Forum
http://community.office365.com/en-us/f/154.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

DBLINK - restrict access to specific objects

I have created private DBLINK to connect to a particular user. I want to restrict only select access to only selected tables under that schema?. Could someone let me know how to restrict the access?.

Boochi wrote:
I have created private DBLINK to connect to a particular user. I want to restrict only select access to only selected tables under that schema?. Could someone let me know how to restrict the access?.Create a new schema (on the remote database), grant SELECT on only the tables you want to allow access to. Create the private DB link to the new schema.

Error 23002 when restricting access to specific TS

I am a bit stumped at the moment on my TSGW. I am attempting to restrict which Terminal Servers the TSGW will redirect to.
I am doing this via RAP > Network Resource > "RD Gateway-managed group"
I created a new group and added the FQDN of the TS I want to connect to and I was unable to connect (received error 23002)
I then modified the group to use the IP address of the TS and received the same error.
I then set the Network Resource option in RAP to "Allow users to connect to any network resource" and I was able to connect. I naturally don't want to do this and want to restrict access as we have other Terminal Servers for other groups.
I must be missing something, but I am not sure what. Any thoughts from anyone?

OK... I may have solved my own issue here. Sometimes typing it out makes me think...
One thing I didn't try was the NetBIOS name within the RD Gateway-managed group.
I entered the 3 entries: IP/FQDN/NetBIOS and things came alive. Now, I shouldn't need all three, so I will need to do some more checking, but at least I'm now in the right direction.

Restriction of Selecting Reason for movement based on the movement type

HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.

Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush

How to find from the data dict if a user has read access on a directory

How to find "dynamically" if a user has READ access to a directory object.
I want to know if there is a data dictionary table that holds if a user/schema has read access to a directory object.
I know there is an dba_directories table and an all_directories table but they dont give information as to which user has read access granted to the directory.

Not so difficult.
select 'YES'
   from all_tab_privs A, all_directories B
   where a.grantee = 'USERNAME'
       and a.table_name = b.directory_name
       and b.directory_path = 'PATH YOU ARE LOOKING FOR'
How to find "dynamically" if a user has READ access to a directory object.
I want to know if there is a data dictionary table that holds if a user/schema has read access to a directory object.
I know there is an dba_directories table and an all_directories table but they dont give information as to which user has read access granted to the directory.

How do I get a list of the reports that a user has access to?

I need to be able to determine which reports a specified user has access to. This is for an application where users will be able to search and view reports that have been archived through a separate process. I've searched through the developer library, but I can't find this specific information. Can I use the ObjectPrinicpals class to get this info?Thanks!-Dell 

Hi Robert!
Yes, the presentation went well.Â It was a lot of fun to do and I had a great time at the conference.
Your suggestion works great if I'm walking down through the reports looking to see who has access to them.Â
However, I need to do this starting from the User object.Â When I use the ObjectPrincipals of the User, I get a list of the users who have the rights to modify the user.Â I did a lot of work on this last week andÂ it boils down toÂ I'm going to have to actually log in as the user (I can use trusted authentication to do this without having the user's password) and then run a query to select all of the reports in the system - this should give me just the reports that the user has access to.Â Not the most efficient way to get the data from my perspective, but it should work.
This would be a great feature to have added to future versions of the SDK.Â I need it for a couple of purposes:
1.Â To gather information to set up the security in my archive viewer application.
2.Â For auditing purposes - we currently have only Professional licenses so I don't have access to the internal auditing functionality.Â Plus, I'm not sure that that includes the kind of info I'm looking for so I'm building an app that extracts information to XML which is then used by a couple of reports so that I can provide the audit info as needed.
-Dell
Â - A computer only does what you told it to, not what you thought you told it to!

HT2688 How do I restrict access to *specific* songs (or give access to a specific playlist) in Home Sharing

http://support.apple.com/kb/HT2688?
This article describes two different things:
Music Sharing and
Home Sharing
Music Sharing allows you to select playlist(s) to share, and allows you to play the song from another device. It does *not* allow you to transfer the song to another device.
Home Sharing allows you to share your ENTIRE music library and transfer the songs to another device. It does not allow you to restrict the share to a specific playlist(s).
Try it. You can set a password and check the boxes to restrict your playlists, but that only restricts while Home Sharing is turned off. EVERY file is accessible when you have Home Sharing running.
I have a bunch of music I don't want my kids listening to. I've created a playlist for them, and I want them to be able to load their ipods with music from that list without accessing other music. Any ideas?

say suppose i have no control over wcf client. so i want to do it at client side. so what is your suggestion. thanks
If you can't implement role based secuirty on the client-side, the you may want to look at what is in the link.
http://blog.clauskonrad.net/2010/04/wcf-restrict-which-clients-can-call.html

Restrict access to specific network devices

Is there a way through ACS to limit user logons to only specific devices? I know through NAR, I can restrict the source address, but how can I restrict the destination?
Thanks

I'm having the same problem.
The ACS in NAR is mandatory to use a AAA Client plus the client and I would like to limit only by the AAA client.
It means, the ACS uses the attributes
Calling-station-ID (Final client)
Called-station-ID (Network Access Server NAS)
I would like to limit only based on Called station.
If you get somehow to solve it please post here.
Thanks

Restricting access to a web app to an IP range

I imagine this is possible, but can seem to locate how to do it. Any help?
Thanks,
Eric

Never mind. We'll just deploy the war to a server behind the firewall
instead of in the DMZ. Should have thought of that first...
"Eric F" <[email protected]> wrote in message
news:3c39f2d1$[email protected]..
I imagine this is possible, but can seem to locate how to do it. Anyhelp?
>
Thanks,
Eric

HT201304 Is it possible to get a refund on in app purchases

My kids got a hold of my iPad and made almost $200 worth of in app purchases for one of their games (I believe it was done during a 15 min window).
Thanks,

Refund
You can try explaining
http://www.apple.com/emea/support/itunes/contact.html

Restricting Access To Specific Groups

Can security be set such that a portal administrator can only edit individual profiles under a select group? How do I do this?

Look at following 9026 plsql API doc link for usage of wwsec_api.remove_group_acl
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PLSQL/DOC/PLDOC_9026/wwsec_api.html

HT201304 Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?

Similar Messages

Maybe you are looking for