HT201304 Way can't I update to ver 5 on my IPad 2
Way can't I update to ver 5 on my IPad 2
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
Similar Messages
-
My iPad model is MC770LL and iOS is 4.3.1. I can't update to iOS 6. Can you tell me why? Thanks.
My iPad model is MC770LL and iOS is 4.3.1. I can't update to iOS 6. Can you tell me why? Thanks.
-
Is it possible to record videos stored in Ipad2 on a DVD recorder or external HDD?
Connect the phone by USB to the computer, import with image capture, iPhoto or whatever application you use to import movies, drop it into iTunes.
-
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
Hi,
I'm a Japanese user of Thunderbird on my MacBook Pro mid-2010, OSX 10.9.4 Japanese language edition.
After I updated the Thunderbird, very often it only shows a tab named "Home" and no folders appear in the Folder Pane, the left end column of the window, just a big huge blank.
I rebooted my Mac several times and only a couple of times I successfully were able to see and use the folders that I created and read the e-mails inside just like I was able to before updating. All the other times, it fails to show folders, and I can't read any e-mails inside them. Even after I succeeded in showing the folders, when I relaunched the Thunderbird it fails again. I did nothing but relaunching the Thunderbird and rebooting the Mac, no other settings I've done ever since I updated to Ver.31.0.
Under this condition it's virtually impossible to use the Thunderbird.
Help me Obi-Wan Kenobi, you're my only help.I still got another couple of Thunderbird 31 user reports on Mac OSX 10.7.5, and 10.8.5 that are supposed to be compatible with TB31 but are unable to use because of the same symptom as I experienced: No folders shown in the Fonder Pane.
So again, it's not the OS compatibility issue, it's a bug in the TB31.
I sure hope they'll fix this issue ASAP!! -
I updated to ios 8.3 and i hate it! Is there a way i can uninstall the update and go back to the one before this?
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
Is there any way we can simplify this update query ?
is there any way we can simplify this update query ? There is nothing wrong with the query ,but it looks so clumsy ...is there any other ways of doing this update like using with clause or exists or any other?
[code]
UPDATE STG_TMP_MBS_POOL s SET s.instrument_id = case when ( (select distinct iai.alternate_id from instrument_alternate_id iai, STG_TMP_MBS_POOL s where s.fi_instrument_id=iai.fi_instrument_id and iai.alternate_id_type_code IN ( 'FMR_CUSIP','CUSIP')) > 1) then (select distinct iai.alternate_id from instrument_alternate_id iai, STG_TMP_MBS_POOL s where s.fi_instrument_id=iai.fi_instrument_id and iai.alternate_id_type_code = 'FMR_CUSIP') else (select distinct iai.alternate_id from instrument_alternate_id iai, STG_TMP_MBS_POOL s where s.fi_instrument_id=iai.fi_instrument_id and iai.alternate_id_type_code IN ('FMR_CUSIP', 'CUSIP')) END;
[\code]update stg_tmp_mbs_pool s
set s.instrument_id = case when (select distinct iai.alternate_id
from instrument_alternate_id iai,
stg_tmp_mbs_pool s
where s.fi_instrument_id = iai.fi_instrument_id
and iai.alternate_id_type_code in ('FMR_CUSIP','CUSIP')
) > 1
then (select distinct iai.alternate_id
from instrument_alternate_id iai,
stg_tmp_mbs_pool s
where s.fi_instrument_id = iai.fi_instrument_id
and iai.alternate_id_type_code = 'FMR_CUSIP'
else (select distinct iai.alternate_id
from instrument_alternate_id iai,
stg_tmp_mbs_pool s
where s.fi_instrument_id = iai.fi_instrument_id
and iai.alternate_id_type_code in ('FMR_CUSIP','CUSIP')
end
Maybe
begin
update stg_tmp_mbs_pool s
set s.instrument_id = (select distinct iai.alternate_id
from instrument_alternate_id iai,
stg_tmp_mbs_pool s
where s.fi_instrument_id = iai.fi_instrument_id
and iai.alternate_id_type_code in ('FMR_CUSIP','CUSIP')
update stg_tmp_mbs_pool s
set s.instrument_id = (select distinct iai.alternate_id
from instrument_alternate_id iai,
stg_tmp_mbs_pool s
where s.fi_instrument_id = iai.fi_instrument_id
and iai.alternate_id_type_code = 'FMR_CUSIP'
where s.instrument_id > 1;
end;
Regards
Etbin -
I bought my iPad from a friend and updated to iOS 7.1. Now in order to activate it I need to sign in using the original iTunes account but I can't contact the owner. Is there a way to get past this or should I toss my iPad into the garbage?
Ask previous owner to remove his device from account
http://support.apple.com/kb/TS4515 -
I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?
Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore. -
Battery running down fast using Yosemite, running the latest update 10.10.2. I think there is bug in this update. Please help me out or is there a way can i switch back to mavericks and how
1. Check the cycle count of the battery against the rated life for your model. The battery may be due for replacement. If the power adapter is connected almost all the time, the battery may need replacing even though the cycle count is not too high.
2. Follow these instructions, or these for OS X 10.8 or earlier.
3. In the Energy Saver preference pane, uncheck the box marked
Enable Power Nap while on battery power
if it's shown (it may not be.)
4. You can also try resetting the SMC.
5. Make sure your system is up to date in Software Update.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
Is there a way that you can share and update the ical between two iPhones 4s?
Is there a way that you can share and update the ICal on different Iphone 4S?
I did that. It looks like everything I want to apply to the iphone from my computer looks good. When I perform an actual sync, what is on my iphone and what I have checked off on the computer are not the same.
-
Is there any way I can cancel the update to ios 8? My iphone is in the stage of having to connect to iTunes to finish the update. I don't have iTunes on a computer so I could never back my phone up which I didn't know you had to. Help!
If your phone is in recovery mode (You see the iTunes graphic on the phone), you MUST connect the device to a computer and restore the operating system. There is no supported way to get around it. The device had a problem installing the update and it crashed. Sorry.
-
My grandad has a 1st edition iPad and when he tries to download certain apps it says he needs at least iOS 5? Shouldn't this be updated automatically? Or can this be updated another way? I haven't been to see his iPad so he may not be looking properly??? Any helpers???
The iOS version is not updated automatically, though if he connects it to his computer's iTunes (if it's a recent enough version) he should be prompted as to whether he wants to update.
He should connect the iPad to his computer's iTunes and copy any purchases off the iPad to his computer via File > Transfer Purchases. He may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. He can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
He can then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
His iPad should update to iOS 5.1.1 (which is the only version that is 'signed' by Apple for the iPad 1, it doesn't support iOS 6). -
I have a white macbook purchased early 2008. I'm updated to ver. 10.6.8 can I upgrade to the new mountain lion and will it operate?
It doesn't appear to be Mountain Lion compatible. See below.
Your Mac must be one of the following models:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009) -
I bought a MacBook Pro last year. I have a redeem code for Os X Lion 10.7. I had to erase all my data on HD. Now i cant update to Lion 10.7 and there is no way a i can download the update from apple unless i pay... AGAIN????
Exactly which Mac OS X version is currently intalled?
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
If you see v10.7 you can use Lion Recovery to reinstall OS X.
Maybe you are looking for
-
Cant print on Hp Pavillion DV 7- 3165 dx Entertainment Notebook PC
Missing xml viewer file on my computer....need assistance to recover file.
-
Upgrading from CS5.5 to CS6 Production Premium
Hello, I am a current student at a University and wish to upgrade my CS5.5 Production Premium to CS6 Production Premium at a student price. Is this even possible? How much is it and where do I go to get it? Thank you
-
Upload Multipile files on a server
How to Upload Multiple files at a time on a server; i.e selecting multiple files at a time and click of a button to upload it.
-
I have got myself a lovely new iMac and can play music on my iTunes through my external hard drive. I have redirected iTunes to do this.The iTunes media folder is correctly showing as my external hard drive, but when I go in to the song info section,
-
Trying to install Yosemite but does not complete the installation
i have a MacBook pro 13 inch, with Mavericks on it. I downloaded yosemite and started the installation. It runs through most of it and then during the last two minutes it doesnt seem to finish. It has been sitting on "2 minutes remaing" for a couple