HT201304 what should i do after forgeting my passcode on my iphone
what should i do after forgeting my passcode on my iphone
Do as the manual says to do and restore the iphone
Similar Messages
-
Hay guy, does any one here know what kind of games can i download/buy for my new macbook pro? and what should i look after before i buy any game?
http://www.apple.com/downloads/macosx/games/
-
After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?
Yes, you will still get the prompt.
I meant reset then try the recovery mode restore again.
You can also try DFU Mode.
DFU (Device Firmware Update) Mode is different than Recovery Mode.
DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
DFU Mode:
Plug your device into your computer.
Turn off the device.
Hold the Power button for 3 seconds
Hold the Home button without releasing the Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys. -
What should I do when I try to sync my iPhone 4s with a MacBook and get the error message: "iPhone cannot be synced...required disk cannot be found?"
Close "iPhoto" if it is open. Open the "Pictures" folder and right-click on "iPhoto Library." Select "Show Package Contents." Right-click the "iPod Photo Cache" folder, select "Move to Trash" and sync your iPhone. The error message should no longer appear.
if that doesn't work,
uninstall itunes and download the lastest version -
I restored my iphone5 after forgetting the passcode unfortunately i am not able to activate the phone because it can't recognize my sim card
Has the phone been officially unlocked by the provider before? Only the provider can unlock the phone, if the phone has been jailbroken to unlock it, restoring will lock it again.
iPhone: About unlocking -
Hello. I need help!
I had an iTunes. Account but I rebooted my pc to its factory mode I lost everything. I just wanna know after I reload itunes back on my pc what should I do to get back all of my songs with out having to purchase them again.Hello rb luv,
Thank you for the detailed question. It sounds like you would like to download all of your previous iTunes purchases.
Follow these steps to download all your purchased songs:
Download previous iTunes Store purchases to an authorized computer
Click iTunes Store near the top of the iTunes window.
Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
In the page that appears, select a category.
iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download. If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.
To download all available items, click Download All.
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thank you for using Apple Support Communities.
Best,
Sheila M. -
What should I do after reading a SCJP book?
I have finished studying a scjp book, then what should I do to prepare for SCJP? Are there good places online to do practice questions?
After finishing the book. Try to develop your own code. try to write the program manually without using any IDE (like netbeans ). Make sure that your all concept are clear.
Try to share your knowledge with others. Try to teach other your friends. Share you knowledge with other so that you
will understand. Remebering each and every thing is not possible so try to do smart study.
if you have any doubt or you have not understood any topic get a help from others by posting your doubts on forum
there are many professionals present in the world and they will definectly help you out. dont worry
but before giving exam make sure your all concept and doubts are clear. and try to search some books which provides the practice question or give online exam which sun and oracle provieds.
Thank You. -
What should I do after creating the Web Serice?
Hi.experts:
I want to create a web service in my ECC 6.0 System.I have created a Web Service on my BAPI,then what should i do in SOAMANAGER,because I do all settings in WSADMIN and WSCONFIG to publish and test the WS in the old version ERP,what should I do in new ECC 6.0?
Best Regards
Martin XieYou have to create an endpoint for the service definition which you have created. This endpoint actually creates a service in the system for communication and you have to invoke the endpoint URL whenever you communicate to thise service provider.
More info can be get it from following link:
[http://help.sap.com/saphelp_nw70/helpdata/EN/b0/787748cf3a4200bb1ba32a62aa8519/content.htm]
Configuring a Service Provider section from the above llink will be useful for you as of now.
Edited by: Siva Satya Prasad Yerra on Jul 14, 2009 3:27 PM
Edited by: Siva Satya Prasad Yerra on Jul 14, 2009 3:28 PM -
[very simple] What should I do after download java package
Hi all,
I have only 2 hrs experience on java so far. I am now trying to create an eye tracking system using webcam, so I find out an example from http://timcam.sourceforge.net/ . I use Netbeam open a signal file from the zip folder which I download from http://sourceforge.net/projects/timcam/ .***Q1. I could not find any project folder in the zip file, what is the extension of the project file? If I don't have a project, what I should do? ***Q2. I open *.java file from the folder using netbeam, I think there is some API which my netbeam don't have. I download the " JSR-000231 Java Bindings for the OpenGL API Evaluation 1.0 Final". However, I don't see any *.exe file and I don't know what should I do with that API folder. Please help
MarcoHi all,
I have only 2 hrs experience on java so far. I am
now trying to create an eye tracking system using
webcam, This is way beyond you if you've only got 2 hours with Java.
so I find out an example from
http://timcam.sourceforge.net/ .
I use Netbeam open
a signal file from the zip folder which I download
from http://sourceforge.net/projects/timcam/ .***Q1.
I could not find any project folder in the zip file,
what is the extension of the project file? There probably isn't a project file. This isn't Microsoft Visual Studio.
If I
don't have a project, what I should do? Create a NetBeans project according to its docs.
***Q2. I
open *.java file from the folder using netbeam, I
think there is some API which my netbeam don't have.NetBeans should be able to open a .java file.
I download the " JSR-000231 Java Bindings for the
OpenGL API Evaluation 1.0 Final". However, I don't
see any *.exe file and I don't know what should I do
with that API folder. Please help
arcoWhat do you need OpenGL for? You're just trying to open a .java file.
This sounds like it's all way over your head. Start with "Hello World". Google for a Java tutorial.
% -
What to do if you forget your passcode and ipod is disabled?
what todo if you forget your passcode and ipod is disabled?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
iOS: Wrong passcode results in red disabled screen
iOS: Unable to update or restore -
My iPhone 5 is not dectecting when i connect it to iTunes on windows; what should I do to resolve this problem? I have restored my device and also installed new itunes.
What happened when you tried to update? Are you seeing an error message?
~Lyssa -
i create a passcode on my iphone 5 but i forget it and i can not use my device ..i want to remove this passcode without making format or restore to avoid loosing my data..any other solution..? or can i make a backup before restoring..? please help me
Hopefully the "If you have previously synched your device using iTunes" section will help you:
http://support.apple.com/kb/HT1212 -
HT1212 i have forget the passcode of my iphone could u pls help me thanks
i have forget the password of my iphone could u pls help me thanks.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
HT201303 I forget the passcode on my iPhone
How can I do remember me my passport
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
What should I learn after HR ESS Workflows
Hi,
Currently I am working on HR ESS workflows and webdynpros.I had already worked on ABAP.
Now i am thinking about what to learn next.Is it better to learn HR functional or any other technical areas?
Please suggest me in this regard ..
Thanks in advance,
Regards,
Rama Krishna.Hi Rama,
You can think about going for XI.
Regards,
Raj
Maybe you are looking for
-
Custom Ringtone for your Contacts on Nokia N900
Hey guys, Its great to know that We got Nokia N900 in India now. Many of people searching for custom ringtone for their contacts. I have installed app for it and worked great, here is the screen of how to do it. 1-goto app manager and download Ringti
-
Is there a way to add a new field to the MD15 layout
Hello, I wanted to add new fields to the MD15 layout list. For example "Vendor ID and Old Material #" Is there a way to do that? Thanks
-
How to disable trackpad when mouse attached?
I used to be able to disable the trackpad when i was using a mouse by going into trackpad system prefs. With the new version of trackpad, I can't seem to do that. Is there a way to disable the trackpad when my mouse is attached?
-
How can I delete my rescue email, in order to use it as my primary email?
Im trying to change my primary email, in order to use my rescue email as my primary I just can't do it. I already deleted my alternative email which is my rescue email and it still doesn't let me. Any ideas or what should I do.
-
Satellite U300-111 - Which Windows 7 version you can recommend?
Hello everyone! I have a friend with a Toshiba Satellite U300-111, and she wants to install Win7 on it. Since it's got a T7100 processor, I'm thinking she could install 64bit version, but it seems like there are far fewer supported drivers compared t