HT201306 Why can't you select whole Collections of books in iTunes to synch to your iPad?

Wondering why iTunes won't allow you to select Collections from the iBooks app to synch to your devices.  Much like iTunes handles music and playlists, it would make sense, if you had created a collection called "Summer Reading List" or even "Odd Thomas Series" that you would then only have to select the name of the Collection in iTunes to load all (or all checked) books from that collection to your device.

Send your tv feedback here

Similar Messages

  • Why can't you use airdrop between all apple devices?!just got the iPad air, and was hoping to have the ability to airdrop images from the mac to the iPad....and you can't do that?! c'mon apple!!Whats going on?!

    Is there any way to use Airdrop between Imac and Ipad air?
    I cant quite believe thatthe two are not interlinked!!? or am i missing something? i can pick up iphone on the ipad, ipad on the iphone but pick neither up on the imac or the imac on the ipad or iphone. Can anyone shed any light on this?

    AirDop on the Mac is a different tech than AirDrop on the iPhone and iPad.  At this time, there is no interaction between thew different AirDrops.
    It is a little confusing that they are called the same, but are in fact different.
    Why Apple did this, I can't say.  Maybe in the future it will be possible.

  • Why can't I select STUDEN adobe CC plan?

    I tried to buy adobe CC student and I could not even select. Why can I not select student / teacher plan
    Best regards
    Urh

    Athellionn then please contact our support team at http://adobe.ly/1d3k3a5 if a new web browser has not given you the correct option.

  • Why can't I select preferred wifi networks

    why can't I select preferred wifi networks

    I don't know how to block the other wireless access points to show on the list, but from what you said, you want to let it connect to one of your preferred network whenever one is available, connect it automatically.
    before you change anything, let run the following command in Terminal to show your Mac current settings:
    /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/airp ort en1 prefs
    copy what it returned.
    mine returned:
    AirPort preferences for en1:
    DisconnectOnLogout=NO
    JoinMode=Preferred
    JoinModeFallback=Prompt
    RememberRecentNetworks=YES
    RequireAdminIBSS=NO
    RequireAdminNetworkChange=YES
    RequireAdminPowerToggle=YES
    WoWEnabled=NO
    That's the default behaviour of OS X, we don't care for what reason it was changed on your Mac. Lets reset it.
    in Terminal, run the following command:
    sudo /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/air port en1 prefs JoinMode=Preferred JoinModeFallback=Prompt RememberRecentNetworks=YES
    it may ask you to put admin password, and do so, press enter to continue.
    Explain a little bit.
    The JoinMode=Preferred means, it will connect your preferred network when it's available.
    JoinModeFallback=Prompt: if no preferred network around, it will prompt you to choose. if you want you can select other options:
         JoinOpen
         KeepLooking
         DoNothing
    RememberRecentNetworks=YES: it will remember whatever network it joined before, put it in your preferred network. If you want, set it to No.
    you can get the details of airport command by run:
    /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/airp ort
    Hope this help.

  • Why can't I select shuffle slide order in my settings?

    Why can't I select shuffle slide order in my settings. . . I see it there as an option, but it won't let me choose it.  I don't want to manually shuffle 329 slides!

    It's only available in slideshow that are generated from a album.  There you can select the Shuffle checkbox.  You can also save the settings for that specific album to be used on any set of photos that you might put in there.  Name the album something like Slideshow and reuse it.  Just remove the last batch of photos from it and add the new ones.  That will save you having to set all of the settings each time or just one setting like music.
    OT

  • Why can't you trim or merge (pathfinder) a gradient?

    Whenever I try to trim or merge a gradient it only divides it, but when it's solid it works. Why? I'm trying to trim/merge some artwork with a lot of gradients and it's making it impossible. If anyone knows of a way to do this with gradients please let me know. Here is an image of what I'm talking about showing it working with solids, but not gradients.
    <a href='http://postimg.org/image/6oew6ezdr/' target='_blank'><img src='http://s11.postimg.org/6oew6ezdr/trim.jpg' border='0' alt="trim" /></a>

    Yes I mean why can't you trim or merge a gradient object (not mesh gradient) like a solid object? Both are objects and both get split in some way without effecting the gradient itself (besides splitting the object of course). So why is it that it only allows gradient objects to basically be divided only, but not merged or trimmed.  It seems like it should work, but for some reason is treats solid objects as solid objects and gradients objects as solid objects with overprint fill applied. I really wish Adobe would address this as it doesn't make sense to clip out the gradient area if the gradient isn't required to change. What's the point of having the trim or merge if it only divides it? What's the point of leaving objects underneath the gradient? It just seems to defeat the purpose of both operations.
    For anyone else following this thread the way to workaround this is by copying each gradient, pasting behind (ctrl+b) and then changing it to a solid color that is not in the design. Once you trim or merge you can select same fill color to delete the solid color from underneath and then you are just left with the gradient properly trim/merged. The bad news is this is super time intensive if you have 100s of gradients on multiple different levels as paste behind pastes only directly behind the object you had selected, so if your order is not perfect some objects will actually paste in front which you don't want.
    Alternatively you could trim or merge everything and then select same fill color and then reunite each gradient, but that changes the gradient position itself so you'll have to reapply the correct angle, etc to each gradient which again is time consuming.
    For all those wondering why do I need to be able to do this. I work with spot colors which have to be trapped correctly with gradients. This requires overlapping gradients and doing overprint fills to make sure they blend properly. If I trim/merge the gradient objects if puts lines through the gradient that shows up in print and makes it more difficult to apply the underlaying color correctly.

  • Why is select calendar and address book greyed out? Why can we not select these options?

    Why can we not select address books or calendars? Why is this option greyed out in ITunes 12?

    You have to make the selection active.
    Go to Select>all, then Select>modify>border.
    Another way is to use a stroke:
    Open your picture file
    Go to Select>all
    Open a blank layer above this
    Go to Edit>stroke(outline) selection. In the  dialog, enter the width of the stroke, choose color, place it inside, ok it.
    If you don't like the border, delete the layer with the stroke, and adjust to suit, then do it over starting with step #3

  • TS3771 Why can't I select "get info" from the file area so I can change the setting to "open in 32-bit mode" ?

    Why can't I select "get info" from the file area so I can change the setting to "open in 32-bit mode" ?

    It may be because of your settings. You can modify that setting in System Preferences > Trackpad. Another way of making right-click is to click the app icon while holding the Control key

  • Why can't you sync from iphone to computer

    when i go to sync music or tones etc a message always come up ...do you want to remove everything from this iphone?
    why can't you merge and then select music etc

    Because, by design, an iPhone syncs or manually manages iTunes content with one computer at a time. Each time you change computers, all iTunes content is first erased from your phone, to be replaced with the content from the new computer.
    So, if you want to sync with this computer, either copy your iTunes library to this computer, or transfer the purchased content on your phone. Without syncing, right-click your phone in the left device pane & select "Transfer Purchases". Make sure this computer is authorized first: Go up to "Store", then "Authorize this Computer".

  • Why can't I select a Music Source - iPhoto 9.1.3?

    I can't stand that awful jazzy piano accompaniment when I start a slideshow, but every time I try to change the music, ie here:
    ...I click on the arrows where it says "Source" & nothing happens. I've tried trashing the pref file, but it still resolutely refuses to show anything at all. I deselected "Play music during slideshow" because that jazzy piano was doing my head in!! Why can't I select some other music source?

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home()/  Library/Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your Home()/ Library/Caches/com.apple.iPhoto folder. 
    3 - reboot and launch iPhoto to try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If that doesn't help try deleting the com.apple.iApps.plist file from the same folder as the iPhoto preference file.
    OT

  • Why can't I select an object from its center?  Direct selecttool will only select bounding box.

    Why can't I select an object from its center?  Direct selecttool will only select bounding box.

    You may have turned on "Object selection by path only" in the "Selection Options".

  • Why can I NOT select March 2013 Month Display in iPad's calendar ?

    Why can I NOT select March 2013 Month display in iPad's calendar ?

    Just found out that I had subcribed for a calendar which shows the numbers of the calendar weeks. Turned this off and no crash anymore.
    How can I get the number of calendar weeks in a different way. So that no crashes occur?

  • HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable?  The article referenced is not dedicated to Bootcamp--too long, too many options.  How do you make it bootable?

    Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable?  The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options.  How do you make it bootable?

    If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
    You have two or three options (depending on your Mac Model).
    1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
    2. Download Software from Apple servers...
    3. Install Windows...
    Are any additional instructions really necessary?

  • Why can't you answer any of my question's? I'm done wasting my time

    Firefox has been a problem ever since it was installed!! It won't allow downloads,plugins,printer stopped working, getting error message I sent you. AGAIN WHY CAN'T YOU HELP ME BY AT LEAST TELLING ME HOW TO MINIMIZE ALL THE LETTERS. THIS JUST STARTED 2 DAYS AGO AND I DON'T KNOW HOW TO FIX IT. I'VE TRIED. WHY WON'T YOU ANSWER ANY OF MY QUESTIONS-DO YOU NOT GET IT EITHER?I'M SO UPSET W/ YOU! I CAN'T DO TROUBLESHOOTING-I'M IN THE RADIOLOGY FIELD FOR 38 YRS. I'M FAR FROM BEING A COMPUTER EXPERT!!YOU DON'T MAKE IT EASY!

    I don't see that you've ever asked a question here before, nor can I see a complete question in your all caps jumble which is very hard to read.
    However a couple of days ago the servers were messed up and undoubtedly questions as well as a great many answers may have been lost. So why don't you tell us in normal letter case what your questions are? Look at the bottom of the following report http://health.support.com/ and at the top of the report it looks like things are working now. We are volunteers (Firefox users like you).

  • Why can't I select and drag addresses from contacts to mail

    Why can't I select and drag addresses from contacts to mail

    Re: can't drag email addresses from contact list

Maybe you are looking for

  • New to Logic 9, Questions about mixing with summing box.

    Hello - glad to be aboard. I just picked up Logic9 last week.. I have been on DP...well since it was P (I guess 20yrs,) Been contemplating the move for quite some time, but as I too, pay the bills with music, I've got to stay on DP until I and Logic

  • ABAP Report WRITE, how to ouptut long lines without additional formatting?

    I am developing a program, which dumps objects as XML and I need to create one big XML file at the end. I would like to start it as a background job and get this XML as spooled output at the end. The problem is that the XMLs come from CALL TRANSFORMA

  • HTTP/1.0 response

    How can I force a HTTP/1.0 response from a java servlet running on oc4j?

  • CrystalEnterprise.Smtp: SMTP_E_TCPSOCKET_SEND(3)

    I' ve made a new server installation of BO XI R2 SP2 on a Windows 2003 server R2. I' ve planed a report that should be mailed but I get the ollowing error: CrystalEnterprise.Smtp: SMTP_E_TCPSOCKET_SEND(3) What can I try to do to resolve this problem?

  • Apple Extreme

    If I use a airport extreme and two express base stations that extend my signal, do I leave wifi on my iMac on? Its directly connected via ethernet. It seems to slow my internet down with the wifi on.