HT201317 Cancel some device use photostream?

How can i know the device whose use photostream by my apple id ?
Does icloud.com help me?

Welcome to the Apple Community.
So far as I am aware, there isn't anywhere you can see a list, but you might get more information from the info feature in iPhoto, either on a Mac or on your iOS device.

Similar Messages

I don't remember my security answer and it's not my 1st time for using this device,i using this before..but the last time I try to buy some games using iTunes card its saying this is your 1st time using this device so I need to answer the security questio

i don't remember my security answer and it's not my 1st time for using this device,i using this before..but the last time I try to buy some games using iTunes card its saying this is your 1st time using this device so I need to answer the security questio

https://expresslane.apple.com/

HT5922 I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

Bonjour,
I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

In article <e35sc3$ru1$[email protected]>,
"-->dan mode" <[email protected]> wrote:
> > All
> > I have a website I would like to remove from the
internet, However I am
> > planning on keeping the IP for a development
location and would like to
> > put
> > a page up that says this site is no longer
available. Is this how you do
> > it
> > or are there other pages to display when a site is
removed.
> > Thanks
> > Dave
Depending on how long the site has been active, it may be
already
spidered by search engines and cached. However, for the most
part, I
usually use my FTP program OR even Dreamweaver itself (now
that I can)
to delete files on the server just as I do locally. Hit the
delete and
confirm

Renewing Creative Cloud for teams, but cancelling some of the seats

Hi all,
When our CC for Teams renewal comes up in December, I want to go ahead with it, but also reduce the number of seats we have, and also change a couple of full subscriptions to single apps only. Has anyone done this sort of thing, and how did it go?
I just had a chat with an Adobe representative who made it all sound very simple, but based on past experience I can't deny that I have some misgivings. Hopefully the community here can give me a reality check! As many others have mentioned, there's no way to manage your renewal in the account settings, so the whole process is opaque to say the least.
My questions are:
1. Can I renew, but cancel some seats at the same time? Or will I end up having to cancel the whole account and start all over again?
2. If we can cancel a few seats, but keep the account open, will we keep our promotional pricing on the remainder?
3. I gather that when you use CC for teams, single application subscriptions can only be bought through a reseller. Is it possible to then integrate these into an existing CC for teams account?
Thanks everyone. Any help or insights much appreciated!

Here are the replies to your queries:
1. Can I renew, but cancel some seats at the same time? Or will I end up having to cancel the whole account and start all over again?
You can cancel the seats as the number of seats can be altered, you do not need to cancel the whole account.
2. If we can cancel a few seats, but keep the account open, will we keep our promotional pricing on the remainder?
If it is within the lock in price then you shall be able to get the promotional price, it needs to confirmed by the reseller or the team renewing it other wise the price at the time of renewal is at the prevalent price.
3. I gather that when you use CC for teams, single application subscriptions can only be bought through a reseller. Is it possible to then integrate these into an existing CC for teams account?
At this point of time, complete CC team & Single app CC team can not be amalgamated.
Regards
Rajshree

My iPhone4 docks correctly with some devices but not others, please help!

Hi,
Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
*Phone used to dock fine with anything and everything - this was about 1 year ago.
*for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
*symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
*I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
*I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
*2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
* now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
*just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
to my knowledge it is NOT;
- a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
- a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
-a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
could it be a problem with the data exchange between phone and device when it is docked??
or do I really need to try changing the port for an 'official' one??
or is it just broken and that's that?!

It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

Can connect to router but can't access internet on some devices

Hello everyone,
I'm fairly good with comptuers / networking but this issue has me baffled. Help would be greatly appreciated.
I have a linksys router (WRK54G) and have 2 desktops and 2 laptops connected to it wirelessly at the moment. I bought 3 smart phones (AT&T Tilts) and a new laptop recently. I don't use encryption but I do have MAC address filtering enabled.
The issue is that 1 of the smart phones can connect to the network and the internet, but the other 2 phones and the laptop can connect to the network but not the internet.
I did add their MAC addresses to the "allow" list ofcourse, which is why they're able to connect to the internet. DHCP is enabled, and these devices get an IP address. I can see them as connected when i log in to my router as well through one of my other computers (I see the MAC address and the IP assigned to those devices) so I know they're properly connected to the network. However, when i try to pull up a website (using either its ip or its domain name), the devices try to open up the page but eventually give me a "The page cannot be displayed or downloaded because the connection was lost" on the pocket PCs, and a generic "page cannot be found" on the laptop. I don't see these requests in the outgoing log table of the router either... I'm supposed to see them as when i use one of my desktops, I can see which site was accessed by which IP.
So basically, the requests from 2 smart phones and 1 laptop aren't even getting to the router apparently. What could be wrong? These devices can access the internet on other routers elsewhere at my workplace or at wi-fi spots.. just not at home, which is a major inconvenience. Why would the router be stopping some devices from connecting to the internet and allowing others? I know it's not a setting in the devices as it can access the internet through other wi-fi spots elsewhere..
Help will be truly appreciated.

Hi, I'm just getting up to speed on wireless but here's some info. Don't have a clue for your phones tho.
If you can connect to your network and talk to each other but can't connect to the internet, then it's an "Authorization" problem. I'ts not a Router "hardware" problem because your other equipment can connect to the internet (modem). It's not a Wireless card "hardware" problem on your laptop because you can connect to your network (router).
You say the Router sees the laptop/phones IP#'s but, do you see the IP#'s ON the computer/phones that can't get online? The Router sees them but do they see the Router?
The computers can talk to each other because your using the "Switched hub"(and wireless) part of the Router. I't doesnt do any translating, it just tells computer 1 that computer 2 want's to talk to it.
Is the Shared Key enabled on one and not the others?(Router menu)
If you can connect at work but not at home then again it's an Authorization problem. You have the right password, setup, etc, for work but not at home. "Hotspots" have no encryption so any one can connect. Do you have the home Router set up as WEP and and Work as WPA? Does your other laptop connect at work also? Do you have a mixed B,G,N band system at home. The Router has to be set at the band your using or have it set for mixed. If it's set for "G" only then any items that have B"or"N" won't be able to talk to it. If i go to a wireless motel thats next to a truck stop and a wireless Cafe, i can "SEE" a good half dozen "networks". I can even connect to a few of them, but, i can't get online because i don't have the password, etc..
Well one more kinda, sorta, possibility, did you lower the "Maximum number of DHCP Users" count to 4 (Router menu) and forget to raise it to 8 or what ever you have now? If you only had 3 computers on, then the Router would only hand out one more IP# so the other phones and laptop wouldn't get any more. It's defaulted to like, 20+ or so, so probably unlikely.
The First phone seems to be the magic bullet. My only suggestion would be to double check the settings and compare everything. You have got to be close.
I hope this get's you nearer,,

To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
Thank you for any help/ solution you can offer.
Regards

I'd ask that on the iPad forum.
https://discussions.apple.com/community/ipad

Shipping date information is shown on some devices, while not shown on others. What is the criteria?

Hello all,
Thanks again for taking the time to read this. I have a customer who considers the shipping date very important in their operations. Our HTOM was taking a look at the reports from the IR portal, and informed me that some devices showed the shipping date, while others did not.
It seems that 'fixed switches' seemed to show this information while 'chassis' did not. What is the criteria that is used to display this information?
Thanks,
John

Hello John,
I think your request may need some technical analysis. I would suggest, please open Service Request (SR) and provide the details of the devices having an issue and report details too, so that technical support team can check availability of requested data in upstream systems.
Per their analysis, they will update you thru SR.
Thanks in advance for accepting SR approach for this request.
Thanks & Regards,
Jaswant

Figuring out how to access a device using Windows.Devices.HumanInterfaceDevice?

Before I start, I would like to share this link I used to access windows RT libraries from Desktop applications (only the ones stated in MSDN documentation that are accessible from desktop applications):
http://blogs.msdn.com/b/cdndevs/archive/2013/10/02/using-windows-8-winrt-apis-in-net-desktop-applications.aspx .
After following the above instructions you can import some of the windows RT libraries in references. I have been trying to use the Windows.Devices.HumanInterfaceDevice library. I think my UsagePage and UsageId are off though. I am wondering
if someone good in hex can translate them from my report descriptor. I already have the VID and PID (this should be enough along with the path if I called write file or some of the other win32/OS api's). Here's the code I am using in VB.NET:
Public Class VirtualMouseDeviceOpen
Class Enumeration
' Enumerate HID devices
Public Async Function EnumerateHidDevices() As Task
Dim vendorId As UInt32 = &HBEEF
Dim productId As UInt32 = &HFEED
Dim usagePage As UInt32 = &HFF
Dim usageId As UInt32 = &H1
' Create a selector that gets a HID device using VID/PID and a
' VendorDefined usage
Dim selector As String = HidDevice.GetDeviceSelector(usagePage, usageId, vendorId, productId)
' Enumerate devices using the selector
Dim devices As Windows.Foundation.IAsyncOperation(Of Windows.Devices.Enumeration.DeviceInformationCollection) = DeviceInformation.FindAllAsync(selector)
Dim count As Integer = devices.GetResults.Count
If count > 0 Then
' Open the target HID device
' At this point the device is available to communicate with
' So we can send/receive HID reports from it or
' query it for control descriptions
Dim device As HidDevice = HidDevice.FromIdAsync(devices.GetResults.ElementAt(0).Id, FileAccessMode.ReadWrite)
Await Vendor.ReadWriteToHidDevice(device)
Else
' There were no HID devices that met the selector criteria
MsgBox("MUTT HID device not found!", MsgBoxStyle.Exclamation)
End If
End Function
Class Vendor
Public Shared Async Function ReadWriteToHidDevice(device As HidDevice) As Task
If device IsNot Nothing Then
' construct a HID output report to send to the device
Dim outReport As HidOutputReport = device.CreateOutputReport()
' Initialize the data buffer and fill it in
Dim buffer As Byte() = New Byte() {10, 20, 30, 40}
Dim dataWriter As New DataWriter()
dataWriter.WriteBytes(buffer)
outReport.Data = dataWriter.DetachBuffer()
' Send the output report asynchronously
Dim a As Windows.Foundation.IAsyncOperation(Of UInteger) = device.SendOutputReportAsync(outReport)
' Sent output report successfully
' Now lets try read an input report
Dim inReport As HidInputReport = device.GetInputReportAsync()
If inReport IsNot Nothing Then
Dim id As UInt16 = inReport.Id
Dim bytes = New Byte(3) {}
Dim dataReader__1 As DataReader = DataReader.FromBuffer(inReport.Data)
dataReader__1.ReadBytes(bytes)
Else
MsgBox("Invalid input report received")
End If
Else
MsgBox("device is NULL")
End If
End Function
End Class
End Class
Here's my report descriptor to avoid scrimmaging through everything trying to find it:
HID_REPORT_DESCRIPTOR G_DefaultReportDescriptor[] = {
0x06,0x00, 0xFF, // USAGE_PAGE (Vender Defined Usage Page)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0xA1,0x01, // COLLECTION (Application)
0x85,CONTROL_FEATURE_REPORT_ID, // REPORT_ID (1)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x15,0x00, // LOGICAL_MINIMUM(0)
0x26,0xff, 0x00, // LOGICAL_MAXIMUM(255)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,FEATURE_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(FEATURE_REPORT_SIZE_CB & 0xff), (FEATURE_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0xB1,0x00, // FEATURE (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,INPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(INPUT_REPORT_SIZE_CB & 0xff), (INPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x81,0x00, // INPUT (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,OUTPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(OUTPUT_REPORT_SIZE_CB & 0xff), (OUTPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x91,0x00, // OUTPUT (Data,Ary,Abs)
0xC0, // END_COLLECTION
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x02, // USAGE (Mouse)
0xa1, 0x01, // COLLECTION (Application)
0x85, 0x02, // REPORT_ID (2)
0x09, 0x01, // USAGE (Pointer)
0xa1, 0x00, // COLLECTION (Physical)
0x05, 0x09, // USAGE_PAGE (Button)
0x19, 0x01, // USAGE_MINIMUM (Button 1)
0x29, 0x03, // USAGE_MAXIMUM (Button 3)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0x95, 0x03, // REPORT_COUNT (3)
0x75, 0x01, // REPORT_SIZE (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x01, // REPORT_COUNT (1)
0x75, 0x05, // REPORT_SIZE (5)
0x81, 0x03, // INPUT (Cnst,Var,Abs)
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x30, // USAGE (X)
0x09, 0x31, // USAGE (Y)
0x15, 0x81, // LOGICAL_MINIMUM (-127)
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x02, // REPORT_COUNT (2)
0x81, 0x06, // INPUT (Data,Var,Rel)
0xc0, // END_COLLECTION
0xc0 // END_COLLECTION
My UsageId is the first Usage Hex value in the report descriptor I believe (I am still a little confused too). My UsagePage is the hex values in the first Usage_Page in the report descriptor.
Note: the problem with the VB.NET code is that it returns 0 on the count above which means it did not find a device using my criteria.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
http://www.computerprofessions.us

Before I start, I would like to share this link I used to access windows RT libraries from Desktop applications (only the ones stated in MSDN documentation that are accessible from desktop applications):
http://blogs.msdn.com/b/cdndevs/archive/2013/10/02/using-windows-8-winrt-apis-in-net-desktop-applications.aspx .
After following the above instructions you can import some of the windows RT libraries in references. I have been trying to use the Windows.Devices.HumanInterfaceDevice library. I think my UsagePage and UsageId are off though. I am wondering
if someone good in hex can translate them from my report descriptor. I already have the VID and PID (this should be enough along with the path if I called write file or some of the other win32/OS api's). Here's the code I am using in VB.NET:
Public Class VirtualMouseDeviceOpen
Class Enumeration
' Enumerate HID devices
Public Async Function EnumerateHidDevices() As Task
Dim vendorId As UInt32 = &HBEEF
Dim productId As UInt32 = &HFEED
Dim usagePage As UInt32 = &HFF
Dim usageId As UInt32 = &H1
' Create a selector that gets a HID device using VID/PID and a
' VendorDefined usage
Dim selector As String = HidDevice.GetDeviceSelector(usagePage, usageId, vendorId, productId)
' Enumerate devices using the selector
Dim devices As Windows.Foundation.IAsyncOperation(Of Windows.Devices.Enumeration.DeviceInformationCollection) = DeviceInformation.FindAllAsync(selector)
Dim count As Integer = devices.GetResults.Count
If count > 0 Then
' Open the target HID device
' At this point the device is available to communicate with
' So we can send/receive HID reports from it or
' query it for control descriptions
Dim device As HidDevice = HidDevice.FromIdAsync(devices.GetResults.ElementAt(0).Id, FileAccessMode.ReadWrite)
Await Vendor.ReadWriteToHidDevice(device)
Else
' There were no HID devices that met the selector criteria
MsgBox("MUTT HID device not found!", MsgBoxStyle.Exclamation)
End If
End Function
Class Vendor
Public Shared Async Function ReadWriteToHidDevice(device As HidDevice) As Task
If device IsNot Nothing Then
' construct a HID output report to send to the device
Dim outReport As HidOutputReport = device.CreateOutputReport()
' Initialize the data buffer and fill it in
Dim buffer As Byte() = New Byte() {10, 20, 30, 40}
Dim dataWriter As New DataWriter()
dataWriter.WriteBytes(buffer)
outReport.Data = dataWriter.DetachBuffer()
' Send the output report asynchronously
Dim a As Windows.Foundation.IAsyncOperation(Of UInteger) = device.SendOutputReportAsync(outReport)
' Sent output report successfully
' Now lets try read an input report
Dim inReport As HidInputReport = device.GetInputReportAsync()
If inReport IsNot Nothing Then
Dim id As UInt16 = inReport.Id
Dim bytes = New Byte(3) {}
Dim dataReader__1 As DataReader = DataReader.FromBuffer(inReport.Data)
dataReader__1.ReadBytes(bytes)
Else
MsgBox("Invalid input report received")
End If
Else
MsgBox("device is NULL")
End If
End Function
End Class
End Class
Here's my report descriptor to avoid scrimmaging through everything trying to find it:
HID_REPORT_DESCRIPTOR G_DefaultReportDescriptor[] = {
0x06,0x00, 0xFF, // USAGE_PAGE (Vender Defined Usage Page)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0xA1,0x01, // COLLECTION (Application)
0x85,CONTROL_FEATURE_REPORT_ID, // REPORT_ID (1)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x15,0x00, // LOGICAL_MINIMUM(0)
0x26,0xff, 0x00, // LOGICAL_MAXIMUM(255)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,FEATURE_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(FEATURE_REPORT_SIZE_CB & 0xff), (FEATURE_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0xB1,0x00, // FEATURE (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,INPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(INPUT_REPORT_SIZE_CB & 0xff), (INPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x81,0x00, // INPUT (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,OUTPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(OUTPUT_REPORT_SIZE_CB & 0xff), (OUTPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x91,0x00, // OUTPUT (Data,Ary,Abs)
0xC0, // END_COLLECTION
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x02, // USAGE (Mouse)
0xa1, 0x01, // COLLECTION (Application)
0x85, 0x02, // REPORT_ID (2)
0x09, 0x01, // USAGE (Pointer)
0xa1, 0x00, // COLLECTION (Physical)
0x05, 0x09, // USAGE_PAGE (Button)
0x19, 0x01, // USAGE_MINIMUM (Button 1)
0x29, 0x03, // USAGE_MAXIMUM (Button 3)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0x95, 0x03, // REPORT_COUNT (3)
0x75, 0x01, // REPORT_SIZE (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x01, // REPORT_COUNT (1)
0x75, 0x05, // REPORT_SIZE (5)
0x81, 0x03, // INPUT (Cnst,Var,Abs)
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x30, // USAGE (X)
0x09, 0x31, // USAGE (Y)
0x15, 0x81, // LOGICAL_MINIMUM (-127)
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x02, // REPORT_COUNT (2)
0x81, 0x06, // INPUT (Data,Var,Rel)
0xc0, // END_COLLECTION
0xc0 // END_COLLECTION
My UsageId is the first Usage Hex value in the report descriptor I believe (I am still a little confused too). My UsagePage is the hex values in the first Usage_Page in the report descriptor.
Note: the problem with the VB.NET code is that it returns 0 on the count above which means it did not find a device using my criteria.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
http://www.computerprofessions.us
I forgot anyone wanting a picture of what the device hierarchy looks like in control panel here it is (HID compliant vendor device is the first one in the report descriptor above I want to access and then the mouse device):
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
http://www.computerprofessions.us

I have a recently acquired iPhone 4. Is it true if I am using PhotoStream to upload photos to my PC via iCloud, photos are only pushed when wifi is available? This means I don't have to worry about extra data usage, right? Thank you.

I have a recently acquired an iPhone 4. Is it true if I am using PhotoStream to upload photos to my PC via iCloud, photos are only pushed when wifi is available? This means I don't have to worry about extra data usage, right?
Thank you.

Correct.
On an iOS device, new photos you take will be automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. Note: My Photo Stream does not push photos over cellular connections.

IPad camera kit error "device uses too much power"

Got the camera kit....when I attach it I get an error that says the device uses too much power. I've shut down and restarted the iPad several times and still get the same error. Anyone know what I can do?

I have a camera that uses compact flash cards therefore I have been experimenting with card readers to avoid draining the camera battery when downloading the images to the iPad.
I have been using the USB part of the camera connection kit with a multi card reader, at first I could not get anything to work, I thought ' the not enough power reason, I sorted out a powered USB hub to try, again no good, I disconnected everything and thought one last try, I put the card in the reader, connected the USB cable to the USB part of the camera connection kit and finally inserted the whole lot into the iPad, to my surprise the light on the card reader came on and a few seconds later 70 nef files were previewed on the screen.
I repeated the above several times with the same results, I then tried two other card readers again OK, but if I just removed the card and then re inserted it nothing happened, these card readers are no name supermarket specials.
I may have been lucky but I will continue to try my method and see if it holds up to regular use, so make the physical connection to the iPad the last part of the connection process, I hope this is of some help to others.

Not able to recognize any video/audio devices using jmf and java soun

Hi ,
I need one help from your side.
Here I am expecting some clarifications from you. Before that let you my environement.
My working environment :
Eclipse tool and added jmf jar to my project I did not do any thing more.
If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
Please bare with my questions.
1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
Do we need any administrives rights for our working PC.
What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
( like for TragetdataLine ...i,e, all ports are getting false)
I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
Can you explain the reasons ? I gone through API but i am not clear.
HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
Thanks
RamaRao.G

Hi ,
I need one help from your side.
Here I am expecting some clarifications from you. Before that let you my environement.
My working environment :
Eclipse tool and added jmf jar to my project I did not do any thing more.
If any thing I need to do just let me know. My target platform is MAC & UBUNTU.
Please bare with my questions.
1) I am not able to recognize any video/audio devices using jmf and java sound APIs on My system.
( I checked with the app mentioned in the http://www.java-forums.org/new-java/11201-jmf-cannot-connect-device.html )
Do we need any administrives rights for our working PC.
What is the procedure/ setup I need to follow from a java application to enable particular audio/video device since I dont about end-user system setup right.
If possible send some sample code to recognize /r detect audio device ( voice input ). It should run on both MAC and UBUNTU.
2) I run the one sample audio recording application of this link (http://www.jsresources.org/examples/SimpleAudioRecorder.java.html) which is provided by YOU.
I got output audio file and able to hear voice on UBUNTU system but not able to hear voice on MAC system.
I heared that default line in ( audio setup of the sys) is wont take any voice data on MAC.Why I made this stmt means we are getting false when using isSupported methods of JAVA SOUND API.
( like for TragetdataLine ...i,e, all ports are getting false)
I have one sample audio recording app implemented by QUICKTIME API. In this case also he taking audio ftom device only using quicetime API.
With that we are able to record and hear audio ( voice input --> not line in , external device we added some thing like SSB...)
3) In case of Video capturing DataSource, Streams are implemented by PullBufferDataSource , PullBufferStream intefaces used.
In case of Audio capturing DataSource, Streams are implemented by PushBufferDataSource, PushBufferStream intefaces used.
Can you explain the reasons ? I gone through API but i am not clear.
HOPE I WILL BE CLARIFIED EVERY THING FROM YOU.
Thanks
RamaRao.G

AAA authentication for networking devices using ACS 4.1 SE

Hi!!!
I want to perform AAA authentication for networking devices using ACS 4.1 SE.
I do have Cisco 4500, 6500,2960, 3750, 3560, ASA, CSMARS, routers (2821) etc in my network. I want to have radius based authentication for the same.
I want telnet, ssh has,console attempt to be verified by radius server & if ACS goes down then it will be via local enable passwordf.
For all users i need to have different privilege levels based upon which access will be granted.
could u plz send me the config that is required to be done in the active devices as well as ACS!!!!

Pradeep,
Are you planning MAC authentication for some users while using EAP for others?
For MAC authentication, just use the following in your AP.
aaa authentication login mac_methods group radius
In your AP, select the radius server for mac authentication. You must have already defined your ACS as a radius server.
In your SSID configuration, under client authentication settings,
check "open authentication" and also select "MAC Authentication" from the drop-down list.
If you want both MAC or EAP, then select "MAC Authentication or EAP" from the dropdown.
Define the mac address as the username and password in ACS. Make sure the format of the mac is without any spaces.
You will not need to change anything in XP.
NOTE: XP normally does not require user authentication if machine has already authenticated but it might behave differently. If it does, I can let you know the registry settings to force the behaviour change.
HTH

I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens.

Hi,
I heard some promote use of "Terminal Services(RDS)", rather than App-V application with SCCM 2012 even if you have SCCM licens. The reason you dont need to repackage\test the application on an client OS...
I don't agree and I have not Heard this Before, just that you use TS for some scenario.
Or is it more likely that "Terminal Services(RDS)", take over the applikation administration?
/SaiTech

Surely this all depends on your environment. There's nothing wrong with creating RemoteApps to push to client devices. Maybe you have an environment where RDS is widely used.
Why not leverage both solutions and target App-V's at RDS servers and then create App-V based RemoteApps that users can run at home as part of a home working solution via RDWeb.
Creating apps via RDS will be an admin overhead yes but then so is creating App-V packages in SCCM.
I don't agree with the arguement re: 'you dont need to repackage\test the application on an client OS...' as
App-V allows you to run on multple O/S types.
To be honest both technologies have their pros and cons.
Cheers
Paul | sccmentor.wordpress.com

LMS 3.2 some devices appear by IP not hostname

dears
i've problem in LMS 3.2 that some devices appear in RME by ip not hostname although they are in HOSTS file !
i tried to use resolver.pl tool and it can fetch the host name when typing the ip but devices still appearing by ip !
i'm using Comon Services 3.3

The device which are already in LMS DCR would stay as it is, if they are added by IP already.
If you are sure all the devices are in hosts file, than you should modify your scheduled discovery job for Update DCR Display Name check box.
Select this checkbox if you want to update the display name of the devices that already exist in DCR, in the next Device Discovery cycle.
For example, consider a device which is discovered by Common Services Device Discovery, exists in DCR with the display name as its hostname.
If you change the Preferred DCR Display Name as IP Address for the next Device Discovery, Common Services Device Discovery will update the display name of the device as its IP Address in DCR after the next Device Discovery.
The display name of devices are not overwritten in the future Device Discovery cycles if you have not selected this option.
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/user/guide/dcr.html#wp1469536
-Thanks

HT201317 Cancel some device use photostream?

Similar Messages

Maybe you are looking for