HT201317 How do I create a web page for my slideshow?
I created a slideshow. I exported it, so now it is in my iTunes...and where else, I admit I do not know. When I exported it, I didn't understand where I was exporting TO.
Anyway, I know I saw somewhere that I can create a web page for my slideshow that will allow my family to come (by invitation) to view the slideshow.
How do I do this?
Any help will be appreciated since I spent about 12 hours putting this show together and now would like to share it with my family.
Thanks!
peace.
That's done with iPhoto in creating a Shared Photo Stream with the video. The slideshow must be in iPhoto. Then follow the steps in this screenshot:
OT
Similar Messages
-
How do i create 2 parameter pages for 1 report?
Hi,
I want to make a purchase order report. first: i need a parameter page to ask how many items that you want to order. second, once user enters a number(let's say 5), i want to have anoter parameter page show 5 empty fields that user can enter 5 items' barcode#, once they entered barcodes, the report will show these 5 items info.
my difficulty is how do i create 2 parameter page for 1 report?
thank youmy question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes) -
How to create a web page for a transaction code
Hi All,,
i ve created a T-code for a program and i want to put tat T-code in to web page or BSP page or as a web link.
Is their any way to do that.. If yes,, please tell me the procedure of how to do it,,
Thanx in advance,,
Ill assign points
DineshI wanted to call the transactio code from a web link or web page,, i ven't created any BSP or any web page,,
Till now, i ve created a transactio code for a ABAP program,..
i need to make it as a web page..
regards -
How do i create a web page on my mac
I am wanting to create a web site on my computer. I heard it is so easy on a mac! I can't find the app needed for this. Can anyone help me. I am very new to the mac world so any advice will be greatly appreciated.
iLife '11 is better than the '09, but iWeb is the same in the two versions. I recommend Wordpress as host; you can create a Wordpress web in this page and configure iWeb using this tutorial
-
I'm trying to help someone with designing one page for their already created iWeb site.
How do I save a version that they could open on their machine.
THANKS
DAnd here's a movie that might help :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html
Unfortunately, the website is offline. I didn't bother to call the Helpdesk. Others already did.
https://twitter.com/#!/onecom/status/144797191154827266
https://twitter.com/#!/search/%40onecom
So you may have to wait. -
How can i create member login page for my site???
I want to create login page for members on my site.
Hi,
Please refer to the following link Re: secure account login
Regards,
Aish -
How do I create a web page using Dreamweaver
I need help to create a website in Dream Weaver. Where do I begin?
Start with HTML & CSS code. Those are the building blocks for everything you will be doing in DW.
http://www.html.net/
http://w3schools.com/
http://www.csstutorial.net/
http://phrogz.net/css/HowToDevelopWithCSS.html
http://webdesign.tutsplus.com/sessions/web-design-theory/
Once you've grasped the above fundamentals, work through this 5-part tutorial:
Creating your first web site in DW CC-
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O. -
How do I create a welcome page for PDF portfolio in Acrobat X?
When making portfolios in v9 i was able to add a welcome page to my PDF portfolio. However, since I upgraded I am no longer able to locate this fucntion. Does it still exist and if so how do i access it? If it doesn't exist can anyone explain to me why Adobe would think it wasn't a relevant feature and disable it in vX?
You need to setup a script to handle this for you. Typically most people do this with a solution like CPanels Web Host Manager. But it depends on your server environment what you would use.
-
How do I create a new page for a new subscriber under a domain?
I have a domain where I want to give each member a subdomain under the domain such as http://www.mydomain.com/Joesdomain.com ? I have a login membership page set up currently with opt in subscribers. I want to give each person a backoffice with email and product information in their own subdomain after they get logged in, as well as a public_html page too.
Thanks in advance,
Romans 838You need to setup a script to handle this for you. Typically most people do this with a solution like CPanels Web Host Manager. But it depends on your server environment what you would use.
-
How do I set the home page for a new tab?
How do I set the web page for when I open a new tab? Whenever I open a new tab it goes to an error site which freezes my firefox browser for a while. How do I change that? I want to open new tabs with google being the home page. I need to set up the homepage for a new tab NOT a new window. Please help! !
If Google is set as your Homepage in Firefox you can middle-click ''(push down on the mouse wheel)'' to open Google in a new Tab.
Or, you can add the feature to Firefox where clicking the New Tab button on the Tab Bar opens your Homepage in a new Tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
And if you have a different Homepage set, this extension allows for any page you set in the extension's options to open when you use the new Tab button. <br />
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/ -
How do you HYPERLINK a web page address to an EXCEL document in Firefox like is possible in Explorer
How do you HYPERLINK a web page address to an EXCEL document in Firefox like is possible in Explorer?
When you follow a hyperlink in Excel, usually it should open in your default browser. You shouldn't have to do anything special in Excel to create the link when Firefox is your default browser compared with IE. However, the Insert Hyperlink dialog might work differently. I think it might be able to automatically pre-populate a URL from IE, while in Firefox, you need to copy the URL from Firefox's address bar and paste it into the Insert Link dialog.
-
Creating a web page in Fireworks CS3
When I create a web page in Fireworks CS3 and export it the
page apears on the left side of the screan. I want it to be in the
center of the screan. How do I make it centered? I know that if I
open it in MS Front Page I can select page properties and center
the page in that program but how do I do it in Fireworks?robweed7 wrote:
> Thanks, I am a beginner. And I understand the "(barf)"
with frontpage. Our
> church ordered frontpage for me to use, then I
discovered Adobe products, and
> can't afford it. I did get them to get me fireworks
though and as a beginner
> it is the coolest graphic design program I have used.
Look at NVu which is free and does a very decent job. I tried
it when it
was only in beta and it was promising although it couldn't
get me to
switch from Dreamweaver. I haven't used the final version but
I'm
certain it will give you better results than using Fireworks'
rigid and
easily breakable exported HTML and certainly a lot better
than FrontPage.
http://www.nvu.com/
> I have another question should you know the answere. As
a beginner I created
> the web page graphics in Fireworks then opened it in
Frontpage(barf) and
> finished the page. I uploaded it to my server and it
looks great in I-Explorer
> but is all chopped up in FireFox. If I publish it
straight from Fireworks it
> looks fine in FireFox. Why, and what do i do?
This is because, despite its flaws (and they are severe),
Fireworks'
exported code is less proprietary and more cross browser
compatible than
FrontPage's. I believed that later versions of FrontPage
created better
code but your story proves once again that no visual Web
"design"
application that falsely promise WYSIWYG is a substitute for
learning
the basics of Web design and development and getting your
hands dirty in
HTML and CSS code to understand how things work. Web design
is certainly
not only about the visuals and any designer who thinks he can
get away
with only creating Web sites visually without the need for a
working
knowledge of the underlying code is seriously delusional (not
saying
this is your case).
I do not mean you need to create your sites' code in NotePad
(which is
completely inefficient IMO). But you do need to understand
how things
work under the hood to make the right decisions in your
editor and be
able to fix problems. WYSIWYG is a pipe dream. Don't buy into
it.
Until you can afford something like Dreamweaver, NVu could
serve your
needs as it offers a source code view and apparently creates
decent code
out of the box. Learning to code HTML and CSS in a more text
based
application may be better for you in the long run if you are
serious
about learning this craft properly though. I'm sorry that I
cannot point
you to specific learning resources as it's been years since I
was a
beginner in this field and learned from too many sources. If
there is
one book I could recommend that I wish had been around when I
started
out in early 1996, it would be Zeldman's "Designing with Web
Standards".
This could be one of the smartest investment you make right
now:
http://tinyurl.com/2s2dhg
(direct link to book page on Amazon)
HTH!
Stéphane Bergeron
reach : connect : communicate
http://www.webfocusdesign.com
blog : tutorials : articles : gallery
http://www.pixelyzed.com -
How to export the Apex web page to PDF with click of a button?
How to export the Apex web page to PDF with click of a button?
Am looking at exporting the Form view on APEX to be exported to PDF.In order to get a PDF, you need to generate a Report....in PDF format.
If you are using the APEX Listener, you can initiate the download of the PDF by calling APEX_UTILS.download_print_document() (I normally place this in a Process)
BUT -- You have to create the Report (under Shared Components) and a Template (also under Shared Components).
The white paper in my first post gives you the HOWTO "[Create] Custom PDF Reports with Oracle Application Express and the APEX Listener".
Start by creating a Report (in Shared Components, bottom right) that uses a simple SQL statement like:
Select * from emp where empno = :P15_EMPNO
You may need to hard code the parameter before you hit "Download XML" button.
The XML that you get from clicking "Download XML" satisfies the "Step 1 - Create an XML Data Source" found on Page 11 of the document.
The rest of the instructions is in that whitepaper.
MK -
How can I "expire" a web page (prevent BACK button access)
How can I "expire" a web page ?
I know some sites will display the following message if we click on the
BACK button in your browser.
Warning: Page has Expired The page you requested was created using
information you submitted in a form. This page is no longer available. As a
security precaution, Internet Explorer does not automatically resubmit your
information for you.
To resubmit your information and view this Web page, click the Refresh
button.
How do I implement this feature??U want to disable back button click
if yes i think
javascript:window.history.forward(1); -
Hi,
I am trying out this Jdeveloper.
I am trying to create a web page that show graphs (values are from a table) as well as some table's data.
Can JDeveloper create such web page ? and what type of project should it be created under ? ADF , Jave EE Web Application ?
appreciate your advise
tks & rgdsHi,
I assume you are using version of JDeveloper 11g. The simpliest way how to make graphs is to create ADF Fusion application. Then you can decide whether you will use ADF BC as a model (or EJB/JPA). In the view project you can create graph very simply
just drag & drop way.
you can learn more here: http://www.oracle.com/technology/obe/obe11jdev/11/dvt/gant_chart_pivot_table.htm
regards,
Branislav
Maybe you are looking for
-
First of all I'm wiling to buy as many apple TV's as needed, so my question is not about how to do everything with one Apple TV device...but rather how to get multiple Apple TV devices in the same general location of the house to work without interfe
-
I've lost songs. They don't show up in a search, they don't show up when I scroll through all my songs, and they don't show up in the browser, but when I try to import them from the original CDs, iTunes asks me if I want to replace the files. And the
-
Time Machine for shared group folders
Hi, I would like to set up time machine for a shared group folder on the server. I would like users to be able to use time machine from clients to see backup history of files in the group folder. Is this possible? How? Gregor
-
Lost my gnome panel in solaris 10, x86 need help !
Lost my gnome panel on solaris 10 x86 box and can't understand why. Can anyone help me out to restore my panel ? Thanks Richie
-
Adding a call event in calendar
Hi, is it possible to schedule a phone call in calendar application? Or add an event that is related to a contact? I have looked in the user guide but not found anything like it Ideas? Thanks