HT201320 Cannot get my telus e mail to work

Cannot get my telus e mail to work

Did you follow instructions to set up telus email from their suppot site?
Did you call telus if those instructions didn't help you?
You are paying them for phone service and support, do you not?

Similar Messages

  • My iPad has been hacked I cannot get into hotmail through mail also I get the apple message ,incorrect password even though this is correct what can I do

    My iPad has been hacked I cannot get into hotmail through mail also I get the apple message ,incorrect password even though this is correct what can I do

    From your description it sounds like your Hotmail account was compromised. Does anyone else know the password and could they have changed it?

  • I cannot get emails through hot mail, every time I try it keeps coming up cannot connect to the server.

    I cannot get emails through hot mail, on my ipad 4, every time I try it keeps coming up cannot connect to the server. Every thing looks correct

    The Hotmail server is down; try again later.

  • I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • I am correctly login Safari but since this afternoon I cannot get the creative cloud application to work. Help

    I am correctly login Safari but since this afternoon I cannot get the creative cloud application to work. Help

    I am correctly login Safari but since this afternoon I cannot get the creative cloud application to work. Help

  • I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture.  I cannot get it to project my school work that I need to teach my students.

    I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture.  I cannot get it to project my school work that I need to teach my students. Help!

    Hi Becki514,
    Welcome to the Support Communities!
    The following articles may help you with your projector issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/ht3382
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/ht3131
    I hope this information helps ....
    Have a great day!
    - Judy

  • I cannot get my 02 broadband dongle to work on my macbook pro

    i cannot get my 02 broadband dongle to work on my macbook pro

    If you haven't already, go to your Applications folder>System Preferences>"Sound">click on the center tab labelled "Output">highlight your external Bose Speakers in the list by clicking on it>turn up the Volume slider at the bottom of the window.  Hopefully that solves your problem.
    Hope this helps

  • Cannot get my a:href links to work

    I have tried and tried but I just cannot figure out why I cannot get some of my links to work. Here is my code:
    <p class="footerNav"><a href="/index.htm">Home</a> | <a href="../graphicArt.htm">Graphic Art</a> | <a href="../illustration.htm">Illustration</a> | <a href="/webServices.htm">Web Services</a> |
                        <a href="/photography.htm">Photography</a> | <a href="/cosmetology.htm">Cosmetology</a></p>
    The site is located at http://www.slattenstudios.com/
    You'll notice that the links at the top of the page work just fine, it's the links on bottom that are giving me the trouble. Please, someone, help me out here.

    You have some coding errors on the page.  If you fix them up I think you should be good to go:
    http://validator.w3.org/

  • HT201320 Cannot get calendar on iPad

    I have a 2nd account showing my mail but cannot get my personal calendar to show on my iPad - does show on my iPhone- what am I missing?

    Hi DMSchultz,
    I apologize, I'm a bit unclear on your exact issue and configuration. If you are talking about an iCloud Calendar that isn't syncing successfully to your iPad, you may find the troubleshooting steps in the following article helpful:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Regards,
    - Brenden

  • Activation - computer crashed, reinstalled Adobe 8, but unable to submit activation info to adobe - "cannot find internet."  Tried deactivating/reactivating, partly successful, but cannot get print to adobe pdf to work, says program needs to be activated

    My computer crashed a few years ago, and I called Adobe and received help getting the software reinstalled and activated.  Computer messed up again in January and I had to reformat/reinstall everything.  This time I loaded Acrobat and am able to view and edit files, but cannot print to Acrobat pdf.  Error message says it has to be activated.  I try to activate but get an error message
    When I try to register I get this
    I cannot get past this message to try submitting again.  Telephone support is apparently no longer available.  I go to online registration and find I'm already registered and cannot find a way to get this resolved.
    I'm having to use a cheesy, free pdf creator program to print to pdf and I'm missing my full acrobat, even though it's old and decrepit.  someday I'll be able to buy the current version, but cannot budget it for now.  Help!

    Looks like we have the exact same problem. Thank you for the description, now let us wait for a solution. Except three computers got fried at the same time at my end, there are four products lost and I have no idea what was where.

  • T430s - cannot get supported multi-monitor configuration to work

    Hi all,
    I just purchased a new T430s and, overall, I've been very happy with it.  However, I'm having trouble getting a particular multi-monitor configuration to work.  Very simply, I am trying to get the very first configuration as is described on this page...
    http://lnv.gy/15YWJnf
    It is simply a 3-monitor setup where one monitor is external and hooked up via VGA, another monitor is external and hooked up via DisplayPort, and the third monitor is the actual laptop monitor.  I simply cannot get this to work!  I can plug in a single external monitor, but when I try and plug in a second, it always disables my laptop monitor, so I end up with only a 2-monitor setup.  Can anyone please help?
    *Also, I should note, I've called Lenovo Support 3 times after encountering this problem, and, suffice it to say, it was an EXTREMELY frustrating and discouraiging experience.  All in all, I spent over 2 hours on the phone and each time, they essentially REFUSED to help me!  They kept citing that it was a "configuration" issue and that it's not their problem, and then they'd forward me to another department which would then forward me right back to them.  At one point, one rep said that I was essentially "**bleep** out of luck".  Furthermore, when I was getting frustrated with the lack of help, I asked a rep to escalate the issue and allow me to talk to a manager.  He said that he COULDN'T DO IT because the system wouldn't allow it, again, citing that it's a configuration issue and not their responsibility!  Does anyone from Lenovo ever read these forums?  Will someone PLEASE take ownership of this issue and help me out?  I'm not asking for much!  I just want to get a setup that you guys say is supported!
    Sorry for the rant, but my interactions with Lenovo support have really been frustrating.  Anyways, any help would be much appreciated.  Thanks in advance!
    Charles
    Solved!
    Go to Solution.

    whoischarles,
    Welcome to the forum!  Thanks for the question and  tweet about this thread.  Thanks Lead_Org for getting us started... I know you have tried out a number of multiple display configs, so you may have some follow up suggestions....
    As far as I know...
    The T430s supports external displays a little differently than the T420s did, and differently than the T430 and T530 do.  There are a number of different discussions on T430s multiple display configs in the forum - you might search a few and just browse them to see the combinations others have tried and their experiences.  Here is one example.  Here is another more recent.
    Here is another more recent.
    Here is an official tip with specific configs that Lenovo supports for the T430s.
    From our official tip, it appears that you cannot have both the LCD and external VGA and displayport.  I think you can have 2 external displayport displays and either a 3rd external via VGA port, or the built in LCD.   I remember trying out some of these a year or so ago, and I seem to recall that you needed a dock to get 3 external, or 2 external and the internal LCD to work on the T430s. 
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I cannot get the followed links colors to work in 24 for some reason.

    I have just downloaded to v24, and now I cannot get the colors to work for the followed links on a web page. I have checked the settings on my other computers running windows 7, but those settings will not
    work on my laptop running windows 8. In my previous firefox version it worked fine, but fails in v24. Any help would be appreciated.

    Are you setting the link colours from inside the Firefox options?
    Some website have their own link colours programmed and will override your specifications.

  • I cannot get the on board lan to work on my neo 875

    first i couldnt get windows to load on raid 0 and a flawless flash to 1.4 and that was solved and now i cannot get the lan to work at all it is seamming ly connected due to the lights flashing but the driver doesnt seam to work properly windows says its the wrong one so maybe its right i have xp pro and what driver am i supposed to be using
    thanks pinki

    Make sure you get any driver updates here :
    http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=434%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6758

  • I cannot get my HP 6500 scanner to work right with my macbook pro when scanning.  Any ideas?

    I cannot get my HP 6500 Printer Scanner Fax to scan with my Macbook Pro.  Prints fine but won't scan.  Any suggestions.

    Hi, I had a similar issue with an HPC4480, I unplugged both the power & connecting cable from the printer,
    rebooted my mac & then reconnected the printer, it was ok after that, check with the HP site about updates for your particular OS & drivers etc..

  • I cannot get my logitech external speakers to work

    I cannot get my logitech speaker to work? They are new.

    Hello there Salvatore,
    It sounds like you are trying to use a set of either bluetooth speakers or speakers connected with a 3.5mm plug or digital out on the computer. If the latter, I would recommend you use the following article to help troubleshoot the issue:
    OS X Mavericks: If you can’t hear sound from your speakers
    If they are bluetooth, I would recommend this article instead:
    OS X Mavericks: Set up Bluetooth audio devices
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for

  • BT drop line socket. No! I do not have an NTe5 soc...

    Hi, the drop line enters my house (built 1977) and connects to a simple oval junction box with four screw connections for incoming and outgoing wires. As I am getting very erratic (not erotic) broadband speeds varying from 150kbps to the best 3.9meg

  • Please answer:/ not much time before I need an answer

    So I am sending my iPhone 4S back to Apple which is broke and there sending me another 4s I was wondering if anyone knows if it possible to pay the extra 200 or 250 dollars and instead of getting another 4s get  the new iPhone 5s?????

  • Stock Market App/Widget

    Greetings, I just came from an HTC Droid Incredible and now am on the Motorola Droid Razr. Apparently (I havent searched fully yet) this doesnt come with a built in stock app so I'm having to search thru the Market for decent Stock widgets. My main i

  • Autosys job scheduling on particular instance

    I have to run one procedure which WARMUPs the memory and keep the data in BUFFER POOL as we set the BUFFER_POOL for few tables as KEEP. But I want to make sure my proc runs on both the nodes/instance of my database. Can you please suggest if this is

  • Move from one application to another without Logging in again

    Hi, I have two standalone applications app1 and app2. When the user clicks on a particular link in app1, He would be directed to another page in app2. Is there a way to avoid the second login that is currently being requested when moving to app2? Bot