HT201320 server unavailable for add account mail

plese hellp me i can't add account mail in my iphone 5, always answer server unavailable for account

Hello, kemal panigoro.
Thank you for visiting Apple Support Communities.
After looking at the iCloud system status, I see there was an outage in regard to iCloud mail on April 12, 2014. I would recommend attempting to add the account again. If the issue persists, try the troubleshooting steps in the article below.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Cheers,
Jason H.

Similar Messages

HT1277 how do I find my outgoing mail server info for gmail account set up?

how do I find my outgoing mail server info for gmail account setup?

Most current Mac systems have a preloaded set of information and settings for the common email providers. Try just choosing gmail and enter your userid and password at the prompts and see if the preload configures correctly for you.

Mail won't let me turn off Server Authentication for .Mac accounts

Greetings. Mail won't let me alter my server settings for .Mac. I am attempting to turn off "server authentication" so that I can use my .Mac account via mail through a hotel network, but every time I change the setting and exit the preferences screen Mail automatically reverts back to the previous setting. Ideas?

Set up a new account for that with account type either IMAP or POP (not .Mac) as you desire.

HT201320 trying to start email and has been telling me server unavailable for days now

It keeps telling me server unavailable when trying to set up email on ipone4s. Lost all my contacts please help

You may be better off asking your email provider what the issue is.

Mail Server "Type" and Mail Server "Address" for Incoming & Outgoing Mail

First, the only browser I use is Mozilla's Firefox, the best browser hands down. Second, I have both a Yahoo email account and a Google "gmail" account that I use regularly (daily). I am trying to set up a mail washing program to rid myself of these ridiculous spammers & scammers, however I need to the the Incoming & Outgoing mail server "type" & "address" to do this and I seem to have guessed the yahoo settings, but I can't seem to get the Google gmail account set up properly. Yahoo settings that worked are: Server Type="POP3" and Server Address="pop.mail.yahoo.com", with advanced settings: Secure Authentication=Required, Secure Connection (SSL)=Required, Store Cached Emails=Yes, Server Port Number=995 (set), Pipelining=Enabled. The equivalent settings for the Google gmail account result in an error message = "Failed to log into POP3 Server". Of course user name & password triple checked, Type=POP3, Address=pop.mail.gmail.com, and , Address="pop.gmail.com" tried also, Port and other settings the same. Where can I find this info for both accounts? Tanks a million! -jw

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

Changing Server Name for EAS Account

Is there a way to change the server name for an EAS account without having to remove the account and re-add it? If not, Palm please put in this ability.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Hello!
The reason for this not avail as a security feature built into the EAS protocol. From a corporate security point of view, corporations do not want the chance of company-sensitive data being extracted/put into a different server(s) that could very well be not their own. Any device that uses EAS will have to remove the acct and add the new one. You IT will need to assist with any data migrations that the new server doesnt have.

Server unavailable for mail

I am unable to connect to my iCloud Mail after updating to 8.3. It says server is unavailable.

Hello, kemal panigoro.
Thank you for visiting Apple Support Communities.
After looking at the iCloud system status, I see there was an outage in regard to iCloud mail on April 12, 2014. I would recommend attempting to add the account again. If the issue persists, try the troubleshooting steps in the article below.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Cheers,
Jason H.

Mail and ical randomly change internal server settings for exchange account

Ever since upgrading to Lion, I randomly find that my exchange mail account, my exchange calendar account and my exchange address book go offline. When I look at the settings, I find that the internal server settings have been changed from the correct address to the word "sites". Cannot figure this one out. I have deleted and added the accounts numerous times. Cannot find any error messages.
Just wondering if anyone else has every experienced this.
Debbie

The last OSX update 10.8.1 fix it, uncheck Server Autodiscovery and it work perfect

Mail setup for exchange - what is the server name for msn accounts

Lost my ability to send messages using mail and msn outlook exchange account. Deleted account and now trying to re-set it up. Get to the server name and I’m stumped. Any ideas? It should be simple but I can’t get it to work. Thanks

Ask Microsoft, it's their server.

Outgoing mail server works for one account only

This may be a coincidence but I just updated to 10.5.2 today and now my outgoing mail on one of my accounts will not send. I shared a SMTP with another one of my accounts thru SBC. I can send when using my SBC account email as sent but cannot use it on my non SBC account now. Any ideas? I tried switching to the 2nd account it should be set to but still cannot send.
I even removed and started over with the email account but still cannot send.

Hi Chris,
I am having the exact same problem. Were you ever able to solve yours?

Problems with server settings for IMAP account

hi
i am trying to configure Mail to work with an IMAP account. i can receive messages OK on this account, but cannot send mail. when i try to send mail i get an error message "sender verify failed".
there was an automated process for adding the account to mail which i installed, and got the following settings:
outgoing mail server: mail.soterianetwork.org
server port: 26
authentication: password
username: soteria
password: ****** (the password is correct)
the error message i get is 'sender verify failed'.
i have also tried ports 25 and 587 without success.
on the web based control panel for the mail account it says: Be sure to enable SMTP Authentication in your E-mail client or you may not be able to send mail.
not sure if i have done this. i have tried changing the outgoing mail server to smtp.soterianetwork.org, still without success
i would be grateful for some help to get this set up correctly
thanks
nick

it was a problem with the server. they changed some settings and all is working fine

WebDEV Server Address for iCloud Account

Does my iCloud account have a WebDEV server address? If so, what would it be? Thanks for any insights.

Thanks Winston. Chased the link to find that the info related to my iCloud mailbox. Was actually looking for a non-email related server address. Am attempting to copy notes created within two different notes programs (Pages and Notebooks) via a WebDAV server. Both want a server address which is somewhat elusive. Thanks if you can further clarify. DP

Activation Server Unavailable for Acrobat 7.... Need Acrobat 7 Professional

Only Standard is listed here: http://www.adobe.com/downloads/cs2_downloads/index.html
Where can I get Acrobat 7 Professional???

This works. Adobe needs to put the comment on their website to use Acrobat Pro 8 since there is no mention of Acrobat Pro 7 - I am sure a lot of people are calling them wanting to know where the Acrobat Pro 7 version is!
After putting up with that idiotic activation message over and over for the past few years, it will be nice to be rid of it forever.
I was concerned that the ORGANIZER feature may have been missing in Ver 8 Pro but it is thankfully still there.

How to Set "delete from hub and server" for each account

How can I set "delete from hub and server" differently for each account?
I have 3 emails (2 shared, 1 personal).
the personal is a 'hotmail' account which has device set to 'sync email', 'push', and 'Use SSL'.
it will only sync one way (from desktop to device).
I cannot set the global setting on the device to "delete from Hub and server" without affecting all accounts.
I do not want to have to confirm delete on every item.
previous to the 10.3 update this was not an issue.
am i missing something? or is this another step backwards?

The only other way would be to set it to prompt every time you get an email. Yeah, I know that defeats the purpose.. I guess in this aspect it is a step back

Windows 8.1 - An attempt was made to query the existence of a blank password for an account.

In my security event logs, I have a lot of this messages and I don't know how to trace where are the coming from. Please help me with that
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          5-1-2014 08:52:08
Event ID:      4797
Task Category: User Account Management
Level:         Information
Keywords:      Audit Success
User:          N/A
Computer:      Computername
Description:
An attempt was made to query the existence of a blank password for an account.
Subject:
   Security ID:       LOCAL SERVICE
   Account Name:       LOCAL SERVICE
   Account Domain:       NT AUTHORITY
   Logon ID:       0x3E5
Additional Information:
   Caller Workstation:   ComputerName
   Target Account Name:   Guest
   Target Account Domain:   Computername
It's not only the guest account, but also the Administrator account, and the UpdatusUser.
My blog: www.enduria.eu | Wiki-moderator Server Certification Study Groups #90days2mcsa (http://borntolearn.mslearn.net/certification/server/w/wiki/default.aspx)

system automatically assigns a PW for guest accounts.
Hetti Arachchige V Aravinda is correct.
Hackers will use a key generator for guess accounts mailed to you, if you click, your are actually installing a run script, usually this will run all the time, if there is an connection, the guest account will tell you the connection and where.
This is most famous with IIS ftp service for guest accounts. This was a major flaw with IIS ftp service in previous OS the ftp world get confused with the amount of failed attempts and grant admin abilities to your ftp.
Your event for guest account would show may attempts, this is a very common old way that spammers used to connect to a device to spread spam.
Wireshark is a sure way to trace packets in and out of your ISP. You can now see what is coming. if you do this, do not let pcap run on start up. I am positive you have nothing to worry about. If you do trace your IP and you see lots of proxys coming
in, I suggest you contact your ISP about this.

HT201320 server unavailable for add account mail

Similar Messages

Maybe you are looking for