HT201328 How can we test that our phone is unlocked after we restore our iPhone?

How can we test that our phone is unlocked after we restore our iPhone? I don't have access to another sim card at the moment. Only my AT&T sim card.

A sure way to check is to connect the phone to iTunes on your computer and click Restore iPhone (not Restore Backup). If the phone is unlocked near the end of the Restore iTunes will display "Congratulations. Your iPhone is unlocked."

Similar Messages

  • How can I test that the ITS is setup right and working?.

    How can I test that the ITS is setup right and working?.
    At present when calling a CRM transaction (BOR object) via the Nav Bar of the Webclient IC I am getting a message box with the title of 'Message from Webpage' and the content saying 'Object expected'.
    I have re-checked the transaction launcher and navigation bar profile setting and these look okay, hence my question regarding the ITS and how we might test that its functional.
    Jason

    I assume that as I also have a call to a URL (website), which is working fine, then the ITS servicer is also working fine.
    That just leads me to know identify why my BOR object is not being called correctly.
    Within the Transaction launcher I have the following settings:
    Entries
    Launch Trans ID: ZZIC1_LT01
    Component set: ALL
    Technical details
    Description: xxxxx
    Class name: ZCL_ZZIC1_LT01
    Statefull: X
    Further Technical details
    Transaction type: BOR Transaction
    Logical system: CMDCLNT600
    BOR Object type: TSTC_UIF
    Method name: EXECUTE
    Transaction Parameters
    Parameter: Object_key
    Value: CRMD_BUS2000115
    Can anyone see any problems with these entries?.
    what's the best way to ensure that 'CRMD_BUS2000115' is a BOR object?. I can run it as a transaction.
    Jason

  • How can I verify that I properly "SIM-unlocked" my IPhone 4?

    As part of my service plan with Bouygues (France), I got an IPhone 4 which is "SIM-locked" and can not be used with another telephone operator.
    After 3 months it is possible to organise the "SIM-unlocking" of the phone, free of charge.
    I did so by contacting the customer support and performing the appropriate procedure with ITunes. Everything seems to have gone right, the IPhone 4 is as great a phone as it was before,
    my question is simple, how can I verify that the phone is actually unlocked? a menu in the phone for example?
    Patrick

    Just put a sim from a different carrier in and try it.

  • My boyfriend and I have each an IPhone with two different Apple IDs. Since the recent software his contacts appears in my Iphone. How can I switch that off? I have be looking at both Iphones and Iclouds.

    My boyfriend and I have each an IPhone with two different Apple IDs. Since the recent software his contacts appears in my Iphone. How can I switch that off? I have be looking at both Iphones and Iclouds.

    All apps and purchases are linked to your apple ID, so you can't share them across 2 devices that are using different apple id's, it won't work. the purchases that are on your mac at the moment will only work with the apple id they were brought with.
    the only thing thats possible to share is purchased music. you have to first covert it to mp3 within itunes, then your bf can import it into his own itunes library and sync with his phone.

  • How can i check whether my phone is unlocked or not

    How can i check whether my phone is unlocked or not

    rozhan.m wrote:
    Im in srilanka, my sister brought me this phone from UK. i dont kwon how to call apple from here. pls help me
    Nothing we can do to help you.  If it was bought in the UK from an Apple store as unlocked, it is unlocked.  If it was bought anywhere else, it will be locked, and only the carrier it is locked to will be able to unlock it.
    If you've tried a local SIM and it has not worked, then you have your answer, it is locked.

  • How can I test that index has helped me

    Hi all,
    It is called that to increase performance, an index could be created at table.
    However how can I see the performance.
    Thanks.

    Hi,
    Basically INDEX works like Pointer in C language. It will point to the addresses of the records which satisfy the field values in the INDEX. So searching for direct address is much easier than searching whole data base.
    U can take an example of searching for a person in the company data base. If u give the person name then there may be somany persons with the same name so u have to filter the output as per ur requirement to find the exact person. Rather if u give Employee number then it will directly return single record. INDEX will also works in the exact way.
    How to test
    Create one sample program to test(Select statements with out using INDEX). First Go to ST05 and on SQL trace, Execute your program, Trace off in ST05 and Analyze ST05.(Data base time, application server time etc).
    Now change ur select statements by using INDEX. Do the same thing above. Then u will come to know how effective the INDEX is.
    There is another command to know the execution time of the select.
    Use GET RUN TIME command before and after execution of some select query with and with out using INDEX. The difference time will be the execution time of that select. In this way also u can analize.
    Thanks,
    Vinod.
    Edited by: Vinod Kumar Vemuru on Mar 4, 2008 8:17 PM

  • How can I test that XProtect is working?

    For people who have virus scanners, there is the EICAR file that they can use to test that their virus scanner is working.
    While XProtect is not a true virus scanner, I would like to know if there is a file like EICAR for the Mac OS that simulates the same thing. How do I know that it's running while I am browsing the web?

    XProtect will detect the EICAR test file. Download the following file:
    eicar.com
    Try to open it, and when it asks what app you want to open it with, select a text editor. At that point, XProtect should jump in and prevent it from opening:
    Of course, it won't actually damage your computer, since it's just an EICAR test file and not actual malware. However, this does demonstrate accurately what would happen if you downloaded and tried to open a malicious executable file.

  • How can  i find that a phone is iphone 4 or 4s?

    how can i recongnize a phone is iphone 4 or 4s ?

    Appearance-wise...
    On the left side of an iPhone 4s, there's a line above the volume buttons while on an iPhone 4, there's no line.

  • HT201328 how can you tell by the phone if it is unlocked?

    i had my iphone unlocked from att i want to know if there ius a way to see if it is unlocked on the phone without having to jhst try another companys sim card.

    After you got unlock approval from AT&T, you were supposed to backup and restore your iPhone in iTunes. Did you see "Congratulation, your iPhone has been unlocked" message after the restore.
    After Restore what does Settings > General > About, Carrier entry say.

  • How can I tell if my phone is unlocked?

    Hi,
    I contacted AT&T to unlock my phone (which they did on their end). I then backedup and restored my phone per apple's instructions. How can I tell if it is unlocked? I misssed the screen saying the phone is now unlocked.  AT&T said to call apple and give them the IMEI number, but I can not seem to find a way to do this without paying money.
    I leave for a trip to the UK in a week and I want the option to use a local SIM over there. I would like to figure out if my phone is unlocked as I will not have access to a computer over there. THoughts?

    Try a SIM from any other carrier (borrow one from a friend).
    Contact Apple support and ask them.
    Restore the device again.

  • How can i buy an i-phone 3GS (unlocked version) from US.

    My query is how can i buy an iphone 3gs from US without taking any contract and use it in India. Can i buy an Iphone 3gs (factory unlocked version) and use it in India by taking the mobile service provider of my own country. I also want to know the price of the iphone 3gs (unlocked version)in US. Can it be shipped to me.

    You don't need to come to the US to purchase a US iPhone. There are already thousands(estimate based on the daily posts we get here), most likely unused sitting in drawers in India right now. Just run an ad in your local paper...you most likely could purchase one or more cheap. They don't work and are all locked to AT&T, but that shouldn't matter...you'll have your US iPhone, no need to travel anywhere. Once you get it, and it doesn't work, don't bother posting here, we can't help you! .

  • How can I view the photos contained in a backup without restoring my iPhone?

    I've had a new iPhone for a while now, and have recently remembered that I had backed up quite a few photos on iCloud in the past. I can see that my backup takes up a lot of memory through the iCloud app for windows.
    My question is: How can I view a backup without using it to restore my iPhone. I don't currently have a mac, only PC and and iPhone.
    Thanks.

    You cannot.
    If the backup is local (not iCloud) you might be able to using a 3rd party tool.

  • How can I reinstall Mountain Lion (already bought before) after I restore my MacBook unibody (restores it to snow leopard)?

    Originally I had upgraded my MacBook unibody to mountain and used time machine to back up my data. I then wanted to restore my MacBook so I did but it restored my MacBook to snow leopard. After restoring to an old time machine backup some of the apps aren't compatible because they require mountain lion but my system got restored to snow leopard. How can I reinstall my already purchased mountain lion if snow leopard doesn't have an App Store?

    10.6 Snow Leopard will get the App Store when you update it to 10.6.8. Download the 10.6.8 combo updater to bring it up to 10.6.8. http://support.apple.com/kb/DL1399

  • How can I test bluetooth, my phone or car issue

    After my car iwas n shop for new battery, I had to reset navigation and radio code.  Tried to pair iPhone 3GS (had been paired before car battery failure), but am unable to get it paired.  Is there some way I can test phone's bluetooth to determine if the phone has failed or the car's bluetooth is bad?
    Bill

    I have restored iPhone.  Same issue, cannot pair with Acura.
    I have noticed that when in bluetooth settings, turn on, and the icon for bluetooth appears.  When I return to hbome page the icon disappears as if bluetooth were not turned on.  I suspect BT is dead.

  • HT201274 how can i verify that i-phone is unlcoked

    How to verify I-Phone is un-locked?

    call apple support.
    or try inserting a different simcard. if it says, invalid sim, then it is surely locked

Maybe you are looking for

  • Cannot View Database Home Page After Upgrading to XE 3.2 on Windows XP

    Hi all, I have recently upgraded from APEX 3.1 to APEX 3.2 on my Oracle 10g XE database running on Windows XP SP3. Unfortunately after successfully completing the upgrade and starting the services when I try and visit the Start -> All Programs -> Ora

  • Flex 3 App having problems with Vista/Flash10

    Hello Forum Folks, I have a small little wizard/form app in Flex 3.0 that runs wonderfully in Flash 9 on a Windows XP box.  However, when I try to run it on a Vista/Flash 10 box, the VBox that contains the wizard is a blank screen.  I get the blank s

  • Did you know that Captivate 8 takes virtually all of the work out of creating responsive online courses?

    I just saw the Adobe Blog article about Captivate 8 and the statement that Cp8 is an " authoring tool that takes virtually all of the work out of creating responsive courses online". http://blogs.adobe.com/captivate/2014/05/the-all-new-adobe-captivat

  • TOC Won't Display in WinHelp

    I am updating a WinHelp project that was previously developed in X3 but which I am now trying to update and compile in RoboHelp 7 for Word. The TOC won't display (i.e., the TOC navigation panel at the left doesn't display) when the help is launched.

  • Invoice matching report in AR Donwpayment Invoice

    Hi Expert, Customer would like to see AR Downpayment Invoice matching report as follow. May I know how to derive the information? BP name(A)   D/P Inv No(B).  Total amount in D/P Inv(C)    Amount applied in invoices(D)    Remaining balance(E)=C-D and