HT201328 Unlocking my iPhone 4s did not work after I did the Restore in my device. Need Help

I received an email confirmation from my carrier that my request to have my iPhone 4s to be unlocked has been sent to Apple and completed, and I followed the instruction given to me for Restoring my device but still not able to use other SIM card. I was advice that I will be able to get the unlock info from Apple when I do the Restore, I'm still getting the error message "SIM card is invalid...." when I replaced the SIM card that came from my carrier with another. Please help. I need to know what am I missing. Appreciate any help.

Yes, I believe the steps did Restore my device as new. I followed the steps given to me in How to Restore software in my device..still I believe the Unlocking did not work because I'm not able to use other SIM card

Similar Messages

Why is my iphone 4 suddenly not working after being forced to "restore to iTunes" and automatic update to iOs7. Phone has been restored, reset and recovered. Will not activate to server. I need a new phone Apple!!

I heard about all the problems with the new iOs 7 update but also heard Apple would force me to do it. I tried to update but didn't have enough space. Had to delete ALOT of my apps and still not enough space. Phone was working perfectly fine and message pops up that "I will not have any service until I restore to iTunes. I plug into laptop to restore and it forces me to update to iOs7. Takes 3 hours. It updates but phone doesn't restore. Have tried all the troubleshooting tips:reset to factory settings, recover etc. Got a new SIM card because it said I don't have one but I do. Apple support wouldn't help me because I was out of warranty, and said I would have to pay. Went to the Apple store and they couldn't fix it and said "it's a hardware issue" that will cost me $170.00+. I FIRMLY BELIEVE THAT THE NEW iO7 FRIED MY PHONE'S HARDWARE. The phone is on the HELLO stage and keeps searching but will not activate to server- it's temporarily unavailable. Have tried multiple times.I have a 3 year contract with Rogers and the phone is less than 2 years old. Apple needs to take responsibility for crashing my phone. I NEED A FREE NEW PHONE!!!

Restore it to factory settings, then set it up from your back up. Did this last year when I got my new iPod, and it worked. I have no idea why syncing OTA can sometimes glitch, but hopefully this will help.

Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
Thx!

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

Hi there Juicy Guava,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W.

My facetime on iphone 4 is not working after the update to IOS7

Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

Videofunction on iphone 4 is not working after the update to IOS7

Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
Anyone else experiencing the same problem?
Anyone with solutions?
Thanks!

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

HT201413 guys, my iphone 4s is not working. i already updated the software, tried to restore but appears an error (1) over and over again. anda also, my serial number shows as n/a. please help.

Guys,
my iphone 4s is not working. I tried to restore it but an error (1) message appears over and over again and No serial number is display, shows as n/a in itunes.
my serial number is C38HGK63DTD2
please help
Regards
Manuela Costa

Error 1 indicates a serious hardware failure. Take the device to Apple for evaluation.

Iphone 3G wifi not working after upgrade

Iphone 3G wifi not working after software upgrade, no proper fix from Apple. APPLE SUPPORT - R U SLEEPING.......

You are not talking to Apple. This is a user to user forum.
If you're using the iPhone 3G, there will be no fix for your problem. The software you have, 4.2.1, is the end of the line for the 3G. Apple is no longer providing software updates for the 3G.

HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart

My Ipod will not work anymore its just the apple showing could you please help me restart?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some.

My Wifi is not working after re setting the net work also

My Wifi is not working after re setting the network also.

Read here:
http://support.apple.com/kb/ts1559
If nothing helps, make an appointment at any Apple store.

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

Iphone 4 vibration not working after upgrading to ios5

Hi,
I have upgraded my iphone4 iOS from 4.3.5 to iOS5. Then onwards my phones vibration seems not working. I tried with restoring with itunes but doesn't helpful to me. Could anyone face this issue/any resolution.
FYI... apart from vibration, remaining alerts are absolutely working fine.
Thanks,
Bala K

Solution found: iphone 5, iOS 7.0.6
Settings > General > Restrictions > (enter passcode) > ...scroll down to "privacy" section and select Microphone > Tick "Allow Changes"
Then open Skype App, and it will request access to the Microphone > Allow
Note, on this screen you have the option to disable all restrictions, or Allow (un-restrict) only specified Apps (e.g. Siri).
Hope this helps.

HT201328 Unlocking my iPhone 4s did not work after I did the Restore in my device. Need Help

Similar Messages

Maybe you are looking for