HT201334 What is mobile workspace distribution profile?

What is Mobile Workspace Distribution Profile? I get messages on my Iphone and Ipad that it is expiring.

I am wondering the same thing. I want to delete it but I do not know what it is.

Similar Messages

What is classroom enterprise distribution profile

when was Classroom Enterprise Distribution Profile installed in my iPhone?
What is this for?

I am wondering the same thing. I want to delete it but I do not know what it is.

Reg. Distribution profile during MM01

Dear Exports
During material creation, in distribution profile field I gave 001 then the following error occured.
Error determining plant distribution profile for plant 1001
Message no. W#442
Diagnosis
An error occurred determining the plant distribution profile for plant 1001.
Diagnosis
Plant 1001 does not exist.
No distribution profile has been specified for plant 1001 in plant master data.
The distribution profile specified for plant 1001 in plant master data is not defined in Customizing.
Procedure
Check the plant master data for plant 1001.
Check the Customizing settings for the plant distribution profiles.
Pls help me giving steps to solves the problem.
Thanks
Rajakumar.K

Thank you so much for your response. Sorry, I should have mentioned that we are not using the Retail functionality. We are trying to use this field for reporting purposes and have been unsuccessful in getting even the defaul distribution profile to work. When trying to select this in MM02, we get the following error:
Error determining plant distribution profile for plant XXXX
Message no. W#442
However, I did follow what you said. SAP gave me a lot of warnings that we are not setup as a retail system, but I went ahead and assigend the Default 001 to the plant in use. This did work, but I'm wondering if this is the best route.'
Thanks again for all of your information, and if you have a more efficient option, please let me know.
Thanks!
Joe

Wish to buy iPad and download Sabre Red Mobile Workspace

I wish to buy iPad and download Sabre Red Mobile Workspace, and am not sure about the best version to choose...any travel agent maybe can give me a suggestion? thank you

http://www.sabre.com/newsroom/sabre-launches-mobile-app-for-travel-agents/
https://itunes.apple.com/app/id673260281
Best version of what - the iPad?
iPad mini Vs iPad 4 Vs iPad 2 – A Detailed Comparison
http://www.redmondpie.com/ipad-mini-vs-ipad-4-vs-ipad-2-a-detailed-comparison/
Chosing Between the iPad 4 and the iPad Mini
http://macmost.com/choosing-between-the-ipad-and-the-ipad-mini.html
16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
How Much iPad Memory Do You Need?
http://ipad.about.com/od/iPad-Tutorials/a/How-Much-iPad-Memory-Do-You-Need.htm
 Cheers, Tom

Distribution Profile / Customer Specific Forecast Release

Hello All,
I have a small question about the distribution profiles in Demand Planning. We use MRP and VMI scenarios.
1. While using VMI, we release forecast from DP to SNP using a distribution profile for each location. We get the percentages based on the quarterly reports on what was actually shipped to the customer and we manually enter the percentage every three months.
Our planners do this manually for the locations today since we only have a bunch of customers through VMI.
2. For the rest of the customers, we use DP and MRP. We release the forecast to ECC using a distribution function that would equally divide the PIR by the total number of days and we see that in MDO4.
The concern now is that instead of dividing the forecast equally by the day, can we divide it by the percentages of forecast consumed by the customer like we do for VMI?
If so, rather than the planner entering the numbers in the distribution profile manually, is there an automated way such as an exit that would actomatically calcuate the percentage consumed by a specific location and update them in the distribution profile automatically. Thank you for your time.
Regards,
Rohit.

Hello Rohit,
You will need these BAdis -
BAdi Name : /SAPAPO/SDP_RELSPLIT
Description: Change period split profile when DP released to SNP.
BAdi Name - /SAPAPO/SDP_RELDATA
Description - Modification of Data During Release from DP to SNP - Orders
You can fetch Period Split Profile value from Freely-Definable Attribute(like AT101) Product-Location Master (Table Name : /SAPAPO/MATLOC) to use during Forecast Release process. is added in /SAPAPO/MATLOC table.
You can create commonly used pattern using distribution functions and mapped those to different Period Split profiles. Also you can map these PSPs to some kind of numeric digits/text to easily identify/remember period split profile names uniquely. These numeric digits can be set into Product-Location Master by either users or by using custom program.
This is just an idea, please think, you may improvise further to make it more purposeful for your scenario.
Example : Common distribution functions -
Month - 4 X 4 - 25% split into 4 Week on the Month
Month - 1F X 1 - 100% on 1st day of the Month
Month - 1L X 1 - 100% on last day of the month
Month - 2 X 4 - 50% split into 2nd and 3rd week of the Month and so on and so forth
Hope this will help.
Thank you
Satish Waghmare

[iPhone SDK] Can't see distribution Profile in Xcode

Okay, I've been struggling for three days now but no matter what I do, I can't see my distribution profile in Xcode.
At times I see weird numbers but not the actual profile name. However packing that doesn't work. I've followed all instructions but in vain. Any one had similar issues?

Same exact problem here. I have been struggling for more than 2 weeks with no solution. It works on my second Mac, but not on my main Mac, the one I used to request the certificates. So, maybe I need to delete all certificates & profiles and import them manually?
Have anyone tried that technique? Did it help? I know that some of you have solved this issue. Could you please post your solution?
Thank you in advance,
Eugene

"Enterprise Distribution Profile Certificate"

I'm getting a pop-up message that says "Enterprise Distribution Profile Certificate" is going to expire in 3 days. What is this and what does it mean?

What do you mean by 'use'?
Apps built using an Enterprise account are for 'use' by the Enterprise. Apps built using an individual dev's account/distribution cert. are for submittal by that dev.
What is it you're trying to do/avoid/accomplish, exactly?

SAP POS - Creating Coupon Distribution Profile

HI,
Can anyone help on the Coupon distrib. prof as I am Simulating the POS Simulation then IDOC is failing because of
No distribution profile exists for coupon article 000000000010001083
I created the coupon profile and assigned to it but what inside the coupon profile need to be maintained I have no idea.
Please let mw know the coupon profile inside settings and its use.
Regards,
Ashu

HI,
Can anyone help on the Coupon distrib. prof as I am Simulating the POS Simulation then IDOC is failing because of
No distribution profile exists for coupon article 000000000010001083
I created the coupon profile and assigned to it but what inside the coupon profile need to be maintained I have no idea.
Please let mw know the coupon profile inside settings and its use.
Regards,
Ashu

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

My Distribution Profile is grayed out in Code Signing Provisioning Profile

Fellow developers, has anyone experienced this problem when you tried to compile your app for distribution:
Did everything as suggested in this forum, including:
- copying a distribution profile to the right folder and also draging over the Xcode icon
- Adding a "Distribution" configuration
- specifying the identity as "iPhone Distribution: My Name"
However, in the "Code Signing Provisioning Profile" picker, when "Any iPhone OS" is selected, the only enabled choice is "Default ..." and the actual profile with my name is grayed out.
More over, the moment I select "Distribution" and then select "Device" in the "Active Configuration" picker, Xcode closes. This behavior can be reproduced all the time.
Any suggestions?
Eugene

It is normal that it is grayed out ( don't ask me why ). To activate the distribution build, duplicate your Release in Distribution, install all the required certificates ( please apple stop those, they're a nightmare to deal with ) , then in the build settings in the code signing you have to TYPE ( there is no drop down box as seen in some screenshots ) "iPhone Distribution" ( instead of "iPhone Developer" ) and tada a few lines below you should see your drop down modified with some distributions entries.
Patricia.

What is the use of profiles in oracle apps,could u pls explain with examples

what is the use of profiles in oracle apps,could u pls explain with examples

1b5595eb-fcfc-48cc-90d2-43ba913ea79f wrote:
what is the use of profiles in oracle apps,could u pls explain with examples
http://www.appspatrols.com/now/blog/understanding-profile-options-in-oracle-apps-oracle-e-business-suite
http://www.oracle.com/pls/ebs121/search?word=Profile+Options&format=ranked&remark=quick_search
Thanks,
Hussein

What is an upgrade distribution system?

In Apple discussion document 2465 [ https://discussions.apple.com/docs/DOC-2465 ] I found this question and answer:
Q: Are there any pitfalls to watch out for?
A: With all upgrades, backing up your data at least twice has been a given. Hardware can fail independently of downloads and upgrades, though may happen simultaneously. Software may be found to be incompatible that has not been tested with the new upgrade, or combination of other software that might be installed with the upgrade. It is also strongly recommended once your backup is complete, to shut down your computer, remove all but Apple wired keyboard and mouse (notebooks remove all input devices). Then once done, reboot, and go directly to the upgrade distribution system available.
Third party system tools, modification, and "maintenance" applications should be verified as compatible, or removed until known to be compatible. Check with developers how to remove if it is essential to use Lion before those applications become compatible. Most "maintenance" tools that deal with system cache, prebinding, are not really maintenance tools. Ask on forum when are the appropriate times to use them before assuming they should be used for upgrades or otherwise.
What is an upgrade distribution system?
Thanks.

Well, if you happen to have several computers that run the same versions of software
and have similar need to upgrade them, essentially offline to not duplicate the costs of
bandwidth activity (and thus perhaps lose access due to overage fee or penalty) the
idea to download copies in a more traditional sense may be more difficult than with the
previous versions of OS X. With up to three Macs at similar OS X version build series,
it made sense to save all of the download compressed document or application files to
share with the other computers, to install & update them offline. And fully restore them
should the need arise, with complete copies of upgrade & updates, saved offline.
Now these require an Apple ID and other steps, the path isn't quite as clear. There may
be a path but it isn't as simple as copying a .zip file to a USB flash drive, and plug that
drive into another Mac, and drag the file to its desktop in Finder. It may be that simple
if you were to get the download without the baggage of ownership tags it may imply.
This is an area I haven't gotten into much, with only one Mac tied to an Apple ID.
The latest OS X is Mavericks 10.9.5, it is OK. I don't push it much with only 4GB RAM.
And the other computers mostly run Leopard 10.5.8. One Tiger 10.4.11. Another that
is seldom turned on, Mac OS8.6 (PowerMac 7600.) None are networked by server.
You could say I kinda made a mistake and kept a new old-stock Mini quad core server
that was ordered in December, so here it is. Although it asks on occasion for me to get
the AppleCare Plan, and extra RAM (it can use 16GB) it has two 1-TB HDDs. Sadly
both are only 5400-RPM rotational, not 7200-RPM; to supplement data transfer time.
Anyway, if you get a fair deal on a refurbished or new-old-stock i7 Mini quad core, it
may be a server model with dual hard drives. You could upgrade them & the RAM too.
And choose to not use the Server. With less RAM, now discontinued model runs OK
with the as-shipped Mavericks. Older stock was said to have Mountain Lion. Better yet
in situation where RAM and system resources are less. Yosemite likes even more...
Well, have fun with it, if possible...
Good luck & happy computing!

Distribution Profile

Regarding building the app with "Device - 3.1 | Distribution" option in XCode - is this profile/option used *only* to build the app for putting it in the App Store (using iTunes Connect) - or can I use it to install the built app on the device also?
I am asking because I am trying to build it with distribution profile and trying to install it on the device, and I get "A valid provisioning profile for this executable was not found" error.
Sam

Shnaps wrote:
Regarding building the app with "Device - 3.1 | Distribution" option in XCode - is this profile/option used *only* to build the app for putting it in the App Store (using iTunes Connect)
Yes.
- or can I use it to install the built app on the device also?
No.
I am asking because I am trying to build it with distribution profile and trying to install it on the device, and I get "A valid provisioning profile for this executable was not found" error.
That's the expected behavior. When building for Distribution, make sure you select "Build", not "Build & Go".
\- Ray

What's Mobile Me? Forgive stupid question

What's Mobile Me, and do I need it? Please forgive a stupid question.

Not a stupid question at all.
Do you need it? You decide. There's a 60 day free trial.
http://www.apple.com/mobileme/pricing/
Matt

What happened to my login profile password?

I recently had my hard drive replaced at my local Apple Store. The drive was failing and my iMac is covered under AppleCare so it was no cost to me and because my iMac is two years old, i got an upgrade from 320 GB stock drive to the current standard 500GB. I returned home and was surprised to find that they recovered ALL of my information. I am thankful for this. The ONLY difference is the login profile pictures have been changed. I thought this seemed normal considering the circumstances, yet when i logged into my profile, the only profile with a password, it did not require a password. I want to make sure my profile has a password on it, and now it doesn't. I go to change it in System Preferences and it requires me to enter my old password. I enter my old password, with my login profile name, and it says it is incorrect. I looked online and found somewhere that Apple Stores are not allowed to change your passwords. I understand in this case that they may have had to, but since it is policy, i assume they did not. If so, what happened to my password? I also see online that you can change a forgotten password by inserting the Mac OSX Install Disk, restarting and changing it there. I began to do this process, but stopped, seeing as before the Restart, it asks me for my login name and password in order to change information. I will try this process, but my original question remains. "What happened to my login profile password?"

*UPDATE 2*
so i realized that they changed the admin on my computer, OR when they put all my stuff back on my computer, it automatically made the admin by alphabetical order, since my (old admin) profile is second on the list. i dont understand why the admin profile would change. and there used to not be a keychain password on that profile. i cant even remove programs now. do i have to back up my files and wipe my computer? start from scratch?

HT201334 What is mobile workspace distribution profile?

Similar Messages

Maybe you are looking for