HT201335 Apple TV AirPlay to AirPort Express and Still Keep Apple TV Audio Out at Same Time?

I want my TV to keep audio and ALSO send audio to and AirPort Express at the same time.
It seems that I can choose either Apple TV audio OR send to AirPlay device. I want both!
How can I send audio to both and AirPlay device and still keep audio on the HDMI connected TV?

>Did Apple ditch the opportunity when they introduced Airplay and switched firmware ?
The first gen ATV has not been supported for getting close to like 5 years now.  So it does not have any of the newer features.  I still like it's user interface over the new one though.

Similar Messages

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • WDS setup with Airport Express and other(non-Apple) wireless router

    Hi,
    I am trying to configure a wireless network with one airport express and one Planex Wireless access point. Can anyone please point me to the settings to be made for such a scenario? I can use either of them as the main WDS device, and have a (wired)router provided by the ISP in the network.(so total 3 devices : airport, planex a/p , ISP router)
    Thanks.

    I'm having the same problem, both with a Linksys WRVS4400Nv2, and a WRT54G. I've not put much effort into the WRT, but the WRVS was such a pain that I don't think I can get it to work at all.
    The WRT doesn't have a section on WDS, but I've read that it's supported anyways, and nothing needs to be enabled on it. Is there a good step-by-step available here or elsewhere that uses close to the same router and Airport Express units, on the latest Airport setup software?
    Basically, I'm trying to set this up for a guy in an ~8000 sq. foot house so he has wireless throughout it, and he wants itunes streaming from the AX. Has anyone done this?
    Message was edited by: manderso

  • AirPort Extreme and AirPort Express and STILL lag in Battlefield

    Hello,
    I recently purchased an AirPort Express, hoping to increase speeds of my wifi (currently getting around 10-13 mbps) so when I play Battlefield: Bad Company 2 on my Xbox 360 on Live, I wouldn't lag out.
    Well, it did nothing. The Express is plugged in directly behind the XBox 360, so I can run ethernet to the AirPort and give my Xbox an N signal. That didn't help. So I disconnected the ethernet and hoped maybe the wireless would be fast for some reason. Well, I still lag through the match (not consistently, but at least several times each match I attempt to play) and 2/3 games I don't even get to finish because it kicks me out. I've considered going through the trouble of port forwarding but the last time I tried that, I saw no difference and thought I may have done something wrong. If there are any suggestions or very accurate walkthroughs for port forwarding, setting up a DMZ/default host, etc., let me know please. I'd love to enjoy my games on Xbox. But something tells me these Airp

    If you want to try wireless again, you can give this a shot. I just discovered it, and it seems to have solved issues for me.
    Open AirPort Utility; select your Extreme and/or Express and choose manual setup. 
    Click >Wireless
    Change Radio Mode to 802.11a/n - 802.11b/g
    Click >Wireless Network Options
    Change Transmit Power to 50%
    Check >Use interference robustness < This step is purely optional. It's worth a shot. 
    I've been noticing issues with performance of my Time Capsule for a while.
    It really started with lack of good range, followed by lousy performance with my iPhone 4 and iPad 2. I was lucky to get 10% of what my speed really is (1.5 Mbps vs. 15.9 Mbps). My iMac was the only thing that seemed unaffected.
    I attempted to setup a Sony Media Player (stay away from them- junk!) then a Roku XD in my bedroom only 20' down the hall from the Time Capsule (direct line of sight). Signal kept dropping and performance was lousy for both. I want another new Apple TV for the bedroom, but that TV doesn't have an HDMI port. I ended up running an ethernet cable down the hall... until this morning.
    After some digging, I found a forum talking about WiFi performance for iPhones and stumbled upon something kinda basically unrelated, but gave me the idea to dig into AirPort Utility a bit deeper. Changing power to 50% didn't sound logical, but lowering output power was mentioned in the forum. AirPort Utility goes from 100% to 50% then lower. Nothing between 50% and 100%. I'll know more about range later today, but I have a feeling it may be mysteriously improved as well.
    Hope it works out for you!

  • I have five iPads, four for my classroom and one that is personal. How can I change my Apple ID on the personal iPad and still keep the apps?  Thank you!

    I have five ipad ii products. Four of them I use in my classroom and one is for personal use.  How can I change my apple ID on my personal iPad and keep all of the apps (i.e. Kindle).  I do not want it connected to my school iPads. 

    All app purchases are permanently tied to their Apple ID. You will have to delete and repurchase the apps with a new ID. I would recommend wiping that iPad and setting it up with another ID.
    ~Lyssa

  • Bluetooth Headset and Headphone audio out at same time?

    My GF and I were on our way to NYC on Acela and decided to watch a movie to kill time. I inadvertenly forgot to bring my headphone splitter, so I figured I could plug in one set of earphones into the headphone jack and use my bluetooth wirelessely. Upon doing so, the Mac Pro brand new, would only let me select one output via sound preferences. Any ideas or works arounds to allow audio out to both headphone jack and wireless? Is it possible to attach 2 bluetooth sets for wireless capabilities to watch movies?
    Message was edited by: Special Educator

    Yeah I do it. I use a Jabra bluetooth adaptor that uses the headphone port. Then I tuck the luetooth unit under my Marware Relay wristband.
    Motorola S9
    Jabra A120s
    Marware Sportsuit Relay
    Nike + Ipod Sport kit

  • Want to know about the AirPort Express and AirTunes

    I have been contemplating purchasing an AirPort Express to stream music from my bedroom into the entertainment room in a 4 bedroom apartment. I have a wireless G D-link router which could be better but its not going to get better any time soon. As far as AirTunes goes, i have been researching it but still have questions on how it works exactly. Also, is it possible to play music through the speakers that are currently hooked up to my computer and through the stero in my living room simulaneously with this device.

    So i have the airport express and i want to use internet at the same time as streaming my music to my stereo. I also have a router that i normally use for internet. My problem is, how do i use them at the same time because the airport run's or the router runs not both. I tried running a ethernet cord from the router to the airport express, and i can now recieve internet and stream music, but i want to be able to use my router instead of the express. also if i can't and have to go through the express, can i password protect the internet connection because i have no idea how to use settings for this device?

  • Airplay error with airport express and apple tv

    I receive this message "An unknown error (-15006) occurred while connecting to the AirPlay device" when trying to play audio from iTunes on Macbook Pro to my airport express and/or apple tv. Both airport express and apple tv work fine with my iphone and ipad as well as streaming video from itunes library to apple tv from the Macbook. I have tried the previously posted solutions, but nothing has worked yet.

    http://www.cultofmac.com/178460/the-real-reason-why-macs-before-2011-cant-use-ai rplay-mirroring-in-mountain-lion-feature/

  • I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

    Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
    Any suggestions.

    It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
    I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
    SNR (in dB) = Signal (in dBm) - Noise (in dBm)
    You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
    ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
    While your still in the System Profiler, note the value for Transmit Rate.
    These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
    SNR Guideline
    40dB+ SNR = Excellent signal
    25dB to 40dB SNR = Very good signal
    15dB to 25dB SNR = Low signal
    10dB to 15dB SNR = Very low signal
    5dB to 10dB SNR = No signal
    Please post back your results.

  • Sound breaking up on Airplay if I stream to Airport Express and Apple TV

    I have recently bought an Airport Express and latest Apple TV. Both are running nicely on my network, and I can use Airplay to stream music to either from my iMac, but if I try to stream to both then the sound breaks up? Can anyone advise why and how to fix this? Could it be my wireless network isn't up to it (11g)
    Many thanks for any advice!

    I am not sure this is entirely relevant but since I found these discussions helpful when I had a similar problem here is my two penn'orth. 
    We have a complex system with two Airport Extremes and 4 Airport expresses of various vintages.  One of these was an old (meaning 'g' only & needs Airport Utility 5.6 to service) one, but this had wireless set to 'off' and only served to stream sound to the house HiFi.  This one and all but one of the others were roamed (that is Ethernet cable connected), as is the Mac Mini House server (other machines are WiFi).
    Breaking up (& other intermittent network issues) only seemed to start with Maverick.  I solved this very persistent problem by replacing the old Express with a new one (in fact replacing one of the others and using that).  I could conjecture that this had been the only node on the network not capable of GE (though some devices like webcams are not either), but I do not see why this was important.
    I still think this rather strange - even the presence or absence of high-data services like eyeTV Netstream made no difference.  But having solved it I should not complain - though it would be nice to understand it.  It would also be nice if the Airport Extremes included a sound port...
    All the Airport devices had been carefully set up according to Apple's default recommendations - so yes some might use 5GHz, though shutting this down did not help. (they still are).
    Hope this helps someone!

  • I was told at the Apple store that I could simply plug in ( electric power) the Airport Express and it would find my wireless network. I hoped to use it as a way to play music from my iphone. I do not use other Apple routers etc,

    The Airport Express is not finding my wireless network. I do not have any of the devices listed below. I have a Belkin wireless router. Can I still use Airport Express ( without plugging an ethernet cable into it) ? Any ideas for how to make it find my network ? It is sitting next to the wireless router-so is in range.
    If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.

    Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

  • HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

    My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do?  Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone.  I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address.  I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • Hi.   Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?  Whenever I click either/or it just changes the speakers rather play through both?  Cheers

    Hi.
    Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?
    Whenever I click either/or it just changes the speakers rather play through both?
    Cheers

    to transfer audio to an airport express the device needs to support airplay unless your samsung tv's manual clearly state it does support it then it don't
    appletv can't get audio input into it the optical connector is output only same with the hdmi port

  • Airport express and apple tv, airport express and apple tv

    Hi
        Just wandering if this is possible.
    I was wandering if I could set up a wireless network with an airport express and then connect the apple tv to it so I could show movies etc via my MAC while travelling.
    Note there would be no internet connection involved.
    I believe you can set up the 'no internet' wirelss net work with the AE, just not sure you could connect the the Apple TV to it.
    May be a question for different forum, sorry if it is,
    Thanks in advance,
    Rich

    I can play videos from the Apple Videos app and the from Photos app with the video going to the monitor and the audio through the speakers attached to the Airport Express.
    but as soon as I try to do it with Keynote, no luck. I have to play videos in Keynote without sound.
    what can I do to fix that?

  • Voltage/Powersupply for AirPort Express and Apple tv

    Hi,
    Just bought the items airport express and Apple tv in the US to take home and to Norway.  The voltage there is 220v and the pins are different.
    Should I return the items, or can this be easilly fixed?

    The products will work automatically from 100-240 Volts and 50-60 Hz.
    But, you will probably need some adapters (not voltage converters) for the pins.

Maybe you are looking for

  • Open document using QAWS Xcelcius.

    Hi All, The OpenDocument link is for an object with QAAWS and Xcelsius and when we hit on the link it pops out with error "The session has been logged off or has expired. (FWM 01002) ". The work aroud is that we need to login to infoview first and th

  • Is there a way to get iphone 4s out of recovery mode without restoring it?

    i was just using my iphone 4s normally and it just froze randomly. i held down the power and home button like i usually do, because my phone freezes up on me somewhat often. i saw a "connect to itunes" screen that i have never seen before, and once i

  • Set Default Standard Element Font in Designer

    Are there any configuration settings or .ini files I can edit in the Designer installation folder that will change the font selected for a standard elements when I place a new standard element from the library onto my form? I realize I could just cre

  • E-Filing

    I Have the the E-filing XI content in my Integartion Repository.While opening the Communication channel teplate iit is giving the message as software component version with GUID b38bcd00............... does not exit. what might be the reason what I h

  • Loading external flash files

    Hi, On my website i have a loade.swf and then a main flsh file containing the site. THe loader loads the main.swf in using moviecliploader and events, to load it into a movieclip on the ame frame. The main.swf loads fine but i use actionscript to giv