HT201335 how to get movies to play with apple mirroring

the movie i put into my computer so that I can watch it on my TV wont display the picture when i turn apple mirroring on.  it works without it but I want to be able to watch a movie with friends on my tv. please help!

no I meant that I put a DVD into my computer and when I tried to mirror it, the picture wouldnt display. the dvd worked fine without mirroring, so my question was why wasnt it mirroring the actual picture/movie? glad they have these discussion boards bc if i called and asked i would have been charged $19

Similar Messages

  • Can i use iport capsule to store movie and play with apple tv, can i use iport time capsule to store movie and play with apple tv?

    Hi
    Can i use iport storage to store movie and play using apple tv?

    hi Alley_Cat
    Thanks, if understand it correctly, apple tv was not able to browse directly content/storage from iport capsule?
    tq

  • I cannot get movies I purchased with iTunes to play

    I cannot get movies I purchased with iTunes to play back on my Mac Mini. It only happens on brand new movies purchased.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone.  Does anyone know how to get them to play on iPads/iPhones?

    mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone.  Does anyone know how to get them to play on iPads/iPhones?

    You have to make sure they are fully compatible with iPad
    Video formats supported:
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Inserted a png PIP into my clip, can see it fine, can see it playing with the clip as expected when moving the play head manually, but cannot get it to play with the clip for preview, pleas help!

    I am sorry if my inquiry here seem dumb but I am a new iMovie user and cannot figure this out.  I inserted a png image into my video clip in the project as PIP, I can see it and move it and can also see it playing with the main clip if I move the play head manually, I can also see the PIP part only playing along with the undelying main clip if I use the Play button in the preview window when the PIP section is selected, however, for the life of me I cannot get it to play with the main clip all together for previewing the entire video via the video play button.  What happens is that the video plays normally and when the PIP section comes in, the video clip stop all motion during the duration of the PIP section and the PIP image itself is simply NOT showing.  Am I missing something really stupid here?  It seems as it the Picture On Picture is a separate clip that plays with the underlying main video clip if selected and played by itself but it is not part of the video clip and will not play with it.  What am I missing here, can anyone please help?
    Shony

    The easiest way to get up and running is to convert your MP3s to MP4s (obviously there won't be a video track). The following link links to a file that was an MP3 that I converted to an MP4 using QT Player Pro. When you go to export the files, make sure you click on "Options" and then check the box for "Enable Streaming" in the Streaming tab. It should stream flawlessly using QT Player. rtsp://rhsstreamit.rih.org/testmp4/Scorpion.mp4
    Make sure you place the media to be streamed in the proper folder. You should only get a "404" message if the physical file doesn't exist.
    Good luck!

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • HT4623 How can I get rid of this new update and go back to the previous one and how can I register a complaint with Apple?

    How can I get rid of this new 7.0.2 update and go back to the previous one and how can I register a complaint with Apple?

    You can't go back.
    You can leave feedback: http://www.apple.com/feedback

  • How to get gui_download and gui_upload with popup filename?

    how to get gui_download and gui_upload with popup filename?

    Here is a short example.
    report zrich_0003 .
    data: ifiletab type filetable.
    data: xfiletab like line of ifiletab.
    data: xstring type string.
    data: rc type i.
    data: itab type table of string.
    data: xtab type string.
    start-of-selection.
      call method cl_gui_frontend_services=>file_open_dialog
        changing
          file_table              = ifiletab
          rc                      = rc.
      read table ifiletab into xfiletab index 1.
      xstring = xfiletab-filename.
      check not xstring is initial.
      call method cl_gui_frontend_services=>gui_upload
        exporting
          filename                = xstring
      changing
        data_tab                = itab.
      loop at itab into xtab.
        write:/ xtab.
      endloop.
    Regards,
    Rich Heilman

  • How do I move music folders with individual music files from windows 7 to itunes folder so that they are recognizable and playble?

    How do I move music folders with individual music files from windows 7 to the itunes library so the files are usable in itunes?

    All of the following programs should work with Vista.
    Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
    Another free program is Pod Player.
    SharePod is also freeware.

  • How to get the contents associated with a component.

    How to get the contents associated with a component.
    Like i have 2 buttons and i want to get the contents associated with these button without clicking them i.e without firing the event.
    By Contents i mean, whatever things we get after firing the event,we get some other window and some thing is added to the current page and so on.

    grab all the code inside the actionPerformed(ActionEvent e) method

  • How to get a minus sign with the cost  field in ALV.

    Hi ,
    How to get a minus sign with the cost field in ALV.
    The Ouput will be displayed like  Rs -1500 instead of 1500-
    I can't use concatenate also as i may have to use the sum functionality of ALV .
    Cheers
    Sunny

    Hi sunny,
    1. The OTHER FIELD
       has to be character field of say length 15.
    2. Write the original numeric value to
       this character field (in a loop)
    3. But simply writing won't help.
    4. use this kind of logic.
    5.
    REPORT abc.
    DATA : m TYPE i.
    DATA : chr(15) TYPE c.
    m = -100.
    WRITE m TO chr.
    IF m < 0.
      SHIFT chr RIGHT BY 1 PLACES.
      CONDENSE chr.
      CONCATENATE '-' chr INTO chr.
    ENDIF.
    WRITE chr.
    regards,
    amit m.

  • After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...

    a.
    After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...
    b. , c.
    What's the best browser to try?... Firefox?... Opera?...
    Why?...
    d.
    What directory/ies contain the downloaded Flash 9 files?...

    a. Your browser and the flash player should work together. You should not have to do any thing
    b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
    c. hard disk - library - internet plug ins

  • How do I move photos sent with a text message to my computer?

    How do I move photos sent with a text message to my computer?

    Save it, then import it to your computer.
    The manual answers your questions. Maybe you should have a look:
    http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

  • How to transport/move a table with data from development to Test to Production

    Hi,
    How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
    Reg
    Sri

    Hi Sri,
    You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
    Thanks Much,
    Abhishek

  • How to get vlan tag programe with mac book air

    how to get vlan tag programe with mac book air,i'm using the usb ethernet adapter

    For prompt help contact TATA.
    For more on this: https://discussions.apple.com/thread/3680625?tstart=270

Maybe you are looking for