HT201335 I am on iOS 7 but airplay doesn't show up in my control center.
Have followed all the troubleshooting but can not get airplay to show up in my iPad 2 or iPhone 4S
Tried reboot - didn't work.
Confirmed on 7.0.4
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
Cheers, Tom
Similar Messages
-
Airplay isn't showing up in my control panel. Where can I find it?
It will appear in your Control Center ... if ...
You are on a WiFi network that contains some AirPlay interface.
If you turned WiFi off, for example, you will not see AirPlay. -
Airport express joins wireless (green flash on) but airplay doesn't work? I have turn off the firewall on the router, but still I cannot connct wireless to the airport express.
Please check out the following Apple Support article to see what the minimum requirements are for AirPlay to work.
Also the following Apple Support article talks about the specifics on how to use an AirPort Express Base Station for AirPlay. -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and… -
HT1222 I need to update my husbands iPad but it doesn't show a update but he has ios4
I need to update my husbands iPad but it doesn't show a update but he has ios4
If you mean that it doesn't show the Settings > General > Software Update option then that only appears when you have iOS 5+ installed, with iOS 4 you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change - but google have app versions in the store. -
I purchased a movie from itunes on my regular ipad but it doesn't show up in my library. I am able to view it via my movies icon on the Ipad I used when purchasing it but it does not show up in my purchases listing to download to my ipad mini. Also if I access my itunes account it does not show up in the history of purchases listing like all my other purchases but it does show up when i open that page at the very top; separate form the list. I've tried everything to get it to show up so I can download/view it on my ipad mini.
Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB -
When trying to update apps it asks for account password but it doesn't show my account ID, it shows my dad's. How can I fix this so I can sign in?
It sounds like the apps were purchased using your dads account, so they will have to be updated using that account.
-
When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?
If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only. -
I downloaded pages from the app store and I can use it on my Mac login but it doesn't show up when my wife logs in to her account? Were using the same computer, just different logins.
No. You need to buy it for your Apple ID and for the other. You will have problems with updates
-
So, I made my account a while ago before I had an iPhone so I can get music. The result of that I can't remember my security questions, and it tells me to send a rescue email an alert, but it doesn't show you how to get to that page. I am getting quite annoyed because apples hours arent the best fitted to my scedule since I have school and work, so I cant call and ask how to get fixed. Please help me all I want to do is buy some music...
Click here and fill out the form.
(90729) -
With ITunes in Windows Vista, I've attempted to drag and drop a homemade video folder from my Desktop to ITunes on the PC in order to transfer it to my IPad (as per instructions), but it doesn't show up in my ITunes library. What else should I be doing?
Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown? -
I plug my ipod into the computer but it doesn't show up on itunes
I plug my Ipod into the computer, but it doesn't show up in Itunes
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
However, recently some or all of Apple support article pages do not work and you might get a page that says Apple is performing maintenance. -
hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone
Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.
-
I have problem when I updated iOS7 yesterday. At first, there was a message popped out in my Iphone 4 said "iOS7 available for u to update, then i clicked "update", then it said "wait while it verifying", after that my phone tuned blank and what i saw was only the "logo of apple". Until now i see only that Apple logo, i can't either switch my phone on or off.
My iTunes in Mac is just updated to version 11.1
I want to restore my phone by connecting my Iphone4 to iTunes in Mac but it doesn't show phone device.
I don't know why it doesnt connect to pc(Mac pro).
Any solution?You need to restart the phone in DFU mode and update the software.
To restart the phone in DFU mode press the power and home button simultaneously for like 10 seconds once the phone is switched off release the power button keep holding the home button while you connect to the computer which has Itunes running and then you can restore or update the software, you can download the update and connect after the software has been downloaded if your phone disconnects, And enjoy you new IOS7. -
I bought Indesign as one app but it doesn't show in my account. How can I install?
I bought Indesign as one app but it doesn't show in my account. How can I install?
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Maybe you are looking for
-
Dock Won't Open and Desktop Flashes
When I log in the dock never opens and the desktop continuously flashes. I know exactly what is causing this but have no idea how to fix it. Basically, there is a corrupt file in my downloads folder so the dock keeps restarting as soon as it opens ca
-
USER EXIT or BADI to update the field in trx. ME41
Hi guys, My requeriments is update the field EKKO SUBMI of record when the trx. ME41 but can not find how to do it, the BADI ME_PROCESS_CUST the method POST not allowed me to meet user and not allow the update the field. Please help ... Thanks.
-
Connecting to an Existing Database
Hi everyone, I want to connect to an existing MS SQL database with Flex. Granted, I know that you can not directly connect to a database in Flex. But, does anyone have an example or can point to an example where someone connects to an existing MS SQl
-
Pandora Doesn't Work on Droid X2-Bad Customer Service from Verizon
This probably isn't news for most Droid X2 users, but my husband can't get Pandora to work on his newly purchased Droid X2. What's really frustrating is that we went to our local Verizon store to pick out a phone for my husband because he wanted to l
-
RAW converter, PSE 9 and Windows 8
I've just upgraded from Windows 7 to 8 and now find that when I try and open Canon CR2 files in the PSE 9 RAW converter, I get a message saying PSE can't open the file because it is "the wrong type of file". TIF and Jpeg files open without any probl