HT201335 i need to know if my macbook late 2008 model is compatible to use airplay

can anyone help/

No it is not.
Only some post 2011 machines (most but definitely not Mac Pros) have the necessary Airplay hardware requirement in the CPU.
See feature specific requirements here:
http://www.apple.com/uk/osx/specs/
Best you can do is try a software workaround like Airparrot.
AC

Similar Messages

I need ti know if the macbook has backlight for the keyboard

i need to know if the macbook ha backlight for the keyboard.thanks

Only the 2.4 GHz Macbook Aluminum comes with backlight for keyboard.

I need to upgrade my MacBook late 2008, what are my options

I need to upgrade my MacBook late 2008, what are my options. I have already upgraded RAM to 4 GB some 4 years ago. Also replaced HDD to 1TB, but ended up with a slower response. I am looking to switch the HDD again to speed up the performance. Any suggestions?
I am open to upgrade the hardware, what options do I have?
Motherboard?
HDD?
Anyway I can increase RAM from 4 GM to higher?
Appreciate tips...

It was a mistake on my part, I tried reinstalling the RAM chips... I love the speed now...
next step to switch to 1TB SSD.... Another $700.00 and my 6+ year McBook will be new again

HT2368 Hello, I have MacBook Late 2008 (Unibody). And I can't install this firmware, need help. Thanks

Hello,
I have MacBook Late 2008 (Unibody). And I can't install this firmware MacBook SMC Firmware Update 1.5
Need your help.
Thanks

Also, according the the 1.4 update page here: http://support.apple.com/kb/DL974
It will update the Boot ROM version (on MB 5,1) to MB51.007D.003.
Yet I have (MB 5,1) Boot ROM version MB51.007D.B03. Weird again!
What a mess Apple. Considering how important firmware updates are you'd think they could make this a little clearer.
Anyways, again, I don't think we need it.

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

Industry standard files such as JPEG are compatible with many brands/versions of programs
Proprietary files such as those created by InDesign are often not backwards compatible, due to new features in newer program versions
This is not unique to Adobe... MS Word DOCX files are not backwards compatible with earlier versions of MS Word

Even though the battery in my Macbook late 2008 shows 995 charged the power adapter light continues to glow red. What do I need to do? s/w fully uptodate, plenty of ram and hd space.

Even though the battery inb my Macbook late 2008 shows 99% chrged the indicator glows red(amber?) What do I need to do? s/w is up to date. Plenty of RAM and HD. s/n W8*******1AX
TIA
<Edited by Host>

Might be the adapter > Apple Portables: Troubleshooting MagSafe adapters

Upgrade SATA drive for macbook late 2008

Hello!!
I am here to ask for help. Let me tell you a bit more about my Mac:
Late 2008 silver 13" MacBook 250GB 2GB RAM 2.4GHz IntelCore2Duo DDR3 MB467LL/A, currently at 10.5.8 OSx system (yes I know I need to update the software as well!)
I currently bought 4GB kit (2x2GB) RAM to upgrade on my silver MacBook (late 2008), and would also like to update my hard drive.
I have looked around on online shops for 2.5" 9mm SATA drive, and came across to 1TB for not too bad a price (between £85 to £100).
Anyone know whether if this is ok for my laptop?
Samsung, WD Scorpio Blue and Toshiba, all are at 5400rpm for 1TB. (However there is 750GB Seagate 7200rpm 16MB - recommended???)
Large memory/drive are usually much needed with me as I do use a lot of design work e.g. Adobe InDesign/Illustrator/Photoshop...you get the drift .
Any advice would be much appreciated!
Looking forward to hear from you soon!
Thanks again,
ejburton.

If all the technical specs (like SATA, physical dimensions, power usage etc) all match then you can use any drive of any available size in your MBP. Right now it appears that the largest available is the Western Digital 250GB 5400rpm drive where as the fastest is the Hitachi 200GB 7200rpm drive. Fujitsu and Toshiba have annonce 300GB drives though I've not heard that either are yet shipping.
I have to say that I'm very pleased with the Hitachi 200GB 7200rpm drive.

Macbook Late 2008 Freezing/Unresponsive trackpad and keyboard

Macbook, Late 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software OS X 10.8.5 (12F37)
This has been happening for months on end. I've repaired the disk repeatedly. My friend who's an ex-Apple Genius said it was the little watch battery on the Logic Board. Replaced it. Still happens. He told me to replace the fan. Still happens.
What happens appears as an absolute freeze. The cursor stops reacting to my trackpad and nothing happens when I press things on the keyboard. Anything on the screen that would naturally be moving/changing is frozen.
I don't know what's going on and I don't know any solutions. I need help.

It's happened to me twice today with regular use. It happens at random whether I'm using a taxing program like Photoshop or reading a textbook in Preview. It happens at random and is a huge pain.

Can I install a 1TB SSD on MacBook Early 2008 model?

Hi,
I have a MacBook Early 2008 model running on Lion 10.7.5. Everything worked perfectly until recently I noticed that the HDD has been making some weird clicking sounds. I spoke and showed it to the local repair shop and they suggested that I have my HDD replaced asap as it could crash anytime.
Now I was wondering if I could just install a SSD on it as those run quite faster than HDD's? I did ask the local repair shop this question but they seemed not to know anything about the MacBook's compatability with the SSD as its an old model.
A quick answer would be very much helpful.
Thanks
-Mustafa

• What I really wanted to know is, are the HDD and SSD connectors same? And would the MacBook be able to handle it?
Yes. Should work very well. I've done this on an old Macbook and a new one. Not difficult, but you will need a # 8 torx screw driver and a #1 Phillips.
The connectors are standardised.
You can google for "how to" videos, there are many on line.

Audio line-in not working on MacBook late 2008

The audio line-in on my aluminium MacBook late 2008 has stopped working.
The built-in microphone works like a charm, but when I connect an external microphone the computer does not register sound any more. I have tried with several microphones, and I have verified in the settings that the sound input is set to line-in (I don't know exactly what the setting is called in English, in French it's "Entrée ligne". Anyway, it must be the right one).
One last piece of important information might be that I hear a scraping sound in the speakers when I connect the microphone. After that, nothing.
Is this a hardware problem or is there anything I can do on my own to fix it?
Thank you!

The built in iMic works
I assume that's a typo and you just meant the "Built-in Mic"
when I turned it on a screen came down that said I needed to restart my
computer. So I assume that means some sort of signal is being recieved by
the line in....
I wouldn't call that a safe assumption, it jsut means your computer crashed. Pretty rare for Mac OS X, but it does happen.
Are you using a PPC or Intel based Mac? I'm guessing intel since you implied that you set GB's prefs to Line-In (this can't be done on a PPC Mac). Make sure GB's Input PopUp menu is set to line in and try creating a New Basic Track.

Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

Hi All,
Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
Message was edited by: jespada

BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
Legend:
SLFM - Super Low Freq Mode
LFM - Low Freq Mode
HFM GV - High Freq Mode (Geyserville/Speedstep)
HFM - High Freq Mode
Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
Freq VID
SLFM -- --
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
Freq VID
SLFM 798Mhz 0.8750V
LFM 1596Mhz 1.0000V
HFM GV2 1862Mhz 1.0500V
HFM GV1 2128Mhz 1.1000V
HFM 2394Mhz 1.1375V
Message was edited by: jespada
Message was edited by: jespada

Looking to upgrade my macbook late 2008

Hi all,
I am looking to upgrade my macbook late 2008 aluminum, i have done a little research and found a few parts which i want to install in my macbook. I just wanted to know if my mac was compatible with the following hardware:
Hard Drive:
Samsung Spinpoint M8 1TB 2.5 inch SATA II 8MB 9.5mm Hard Drive
Memory:
Komputerbay 8GB (2x 4GB) DDR3 SODIMM (204 pin) 1066Mhz PC3 8500Al
My macbook specs are:
Model Name:          MacBook
Model Identifier:          MacBook5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz
I am thinking of installing these by myself, if this possible? And if so how could i go about doing this?
Thanks for reading, i would appreciate any help.

Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the RAM on the Aluminum Unibody.
http://eshop.macsales.com/installvideos/macbook_13_unibody_mem/
And read this before putting 8gb in your MacBook http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb

I have a MacBook Late 2008 Aluminium and want to increase my storage what should I buy a new HDD or an SSD? I want it to work faster too, can you please recommend specific products that I can consider

I have a MacBook Late 2008 Aluminium which has 160GB currently. I want more storage and to speed up my computer. What should I get HDD or a SSD?
Also can people recommend specific products that are compatible, what are my options?

If you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao.

I have a macbook Air 2008 model no: A1237

i have a macbook Air 2008 model no: A1237, I want to change the screen but don't know what size to order

If you are going to DIY iFixit has lots of Guides, tools and Parts. Once you get the back cover off on the bottom of the display you will see a manufacturer's part number....(for example: B133EW03 V.1 - Note may not be your part number-just for recognition) once you have the part number Google Shopping will help you find compatible or exact matches.

Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?

Has anyone resolved the whirring sound from the Macbook late 2008 Optical Drive Self-diagnostic yet?

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the hard drive does not appear in the DU sidebar list then it has died and will have to be replaced. No need to proceed beyond this point.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT201335 i need to know if my macbook late 2008 model is compatible to use airplay

Similar Messages

Maybe you are looking for