HT201335 Mirroring button never appears, even with prereqs...

I am on the iOS 6.1.3 on my new ipad (v3) and Apple TV 5.3 I can stream music from my iPad but I still do not get the mirroring button. What am I missing?

You can't enable mirroring from within an app. Make sure to go to the multi-task bar, swipe (left to right) to bring up airplay and toggle ON mirroring.
Also see
http://support.apple.com/kb/ts4215

Similar Messages

Hello - I used a Sony DVD to burn 350 songs. When I put the DVD into another computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. What's preventing songs from being ripped?

Hello - I used a Sony DVD to burn 350 songs from my iTunes library to share with a friend. When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. Anybody know what's preventing me from ripping what's on the DVD?

When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes.
The import command only works with audio CDs. So if you burned the files in mp3 format, try instead using the "File > Add file to library" or "File > Add folder to library" commands.

AirPlay Mirroring doesn't work even with the specified hardware/software

Hello,
I have a late 2011 (OS X 10.7.5) MBP and a Sep 2012 Apple TV (MD199LL/A) with the updated software 5.1.
AirPlay Mirror icon doesn't appear in the menu bar.
No options/icons or texts related to AirPlay mirroring in System Preferences > Displays either. Checked detect displays, still no.
Updated all the software in both the MBP and the Apple TV on Oct 6th 2012 late evening/night and restarted both a couple of times, still no signs of AirPlay Mirror icon or option.
BTW, AirPlay works with iTunes, so I can hear music from MBP on my TV.
AirPlay Mirroring works with the latest iPad (as of Sep 2012) as well.
I think one or two people have reported this issue on the forum in response to some question/discussion. Thought it deserved starting a new topic in case some Apple folks are listening.
Perhaps their adverstising or guidelines need an update to remove references of AirPlay mirroring working with 2011 or newer MBPs. Perhaps they meant 2012 or newer?

pthompson63
To be honest I use mine mainly near power and juice up when I can so I don't test the battery too heavily, so I haven't noticed but would probably not.
If mirror is the only thing you want to do but don't want ML look at third party apps such as airparrot or reflectorapp (I hvae used airparrot and found it OK).
Jules

Flash updater keeps appearing even with updates disabled

We have a Remote Desktop Services environment and we've disabled the Flash Updater in the control panel. This is being done by a CPL (FlashPlayerCPLApp.cpl) that we move at install time.
The box "Never check for updates' is selected.
We also deployed mms.cfg with the following contents:
AutoUpdateDisable=1
AutoUpdateInterval=0
However users still receive a Update notification. This started with Flash 15. How can we configure Flash that it actually honors the control panel settings?

Hi mbovet-rzg,
We did have a bug where, on some systems, users continued to get the notification update even though Updates had been disabled. This bug has been fixed in a more recent version of Flash Player than what is currently installed on the system (15.0.0.189 as per your screenshot). 15.0.0.189 is quite old and we have released numerous security fixes since then. Please install the latest vesrion, 17.0.0.134. It not only has the fix for the behaviour you are observing, but it also contains the latest security fixes that 15.0.0.189 is vulnerable to.
Also, there is no need to 'move' the FlashPlayerCPLApp.cpl from one system to another. All that is needed is to disable AutoUpdates via the mms.cfg file, which you indicate you are doing.
Maria

Ejb BMP never commits even with transactions

I have serious problems with any EJB running inside the Oracle8i server, Linux Rh6.2/Oracle 8.1.7.0.1
ALL code does not perist its data, but it sielently fails. For instance take
$ORACLE_HOME/javavm/demo/examples/ejb/transactions/clientside
I changed the last line in Client.java from crollback to commit()...
I run this program twice:
Beginning salary = 3000.0
End salary = 3300.0
Beginning salary = 3000.0
End salary = 3300.0
The second invocation should show the beginning salary as 3300.0
In essance ALL of my EJBs are showing simular behavior. This problem is also seen in ALL of the examples. My environment uesed to work, but I can't figure out what changed to make every EJB-BMP nonpersistant.
any help would be greatly appreciated.
thanks,
-rick

I don't think my probmem is related to an exception being lost because no exceptions are throws, I have alot of trace information and I always see complete method calls through ejbCreate, ejbStore, et. al.
My problem is that a transaction never gets commited, even when the JTS is used. Infact I have this piticular problem with ALL Oracle BMP-EJBs
I'm just going to have to open a ITAR, guess thats want support is for. I'm just perplexed as to why it worked last week, and now the demos can't save their state.
a bit scarie for something that may one day be in production.

AirPlay button not appearing even after reboot

I recently updated my iPhone 3Gs 32GB to iOS 4.2.1 and found no AirPlay button. I read a thread about rebooting your iPhone once, but that didn't fix the problem either. Even after rebooting the device, I still can't see any AirPlay button. Any help?

I have the same probelm and even thought the botton on
any suggestions ?

Popups and popunders appear even with popup options turned on

I get the annoying popups or popunders whatever they are when I use the firefox browser. While checking emails, hanging out on facebook or even if I leave the computer on an internet site while I'm away. Some of the pages that come up are how to make money from home working for google, popups telling me my computer is in danger of being hacked, and who knows what else. Its so annoying. How do I get this to stop? I've tried blocking the sites but they still pop up.

First thing to do is to scan for Malware.
Install, update, and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. '''''(Not all programs detect the same Malware.)'''''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Where is the device button on the new version of itunes? When we connect our ipod touch -- it never appears.

Where is the "device" button in the new version of itunes? Whenever we connect our ipod touch(es) -- 4th generation....a device button NEVER appears. We can't "click and drag" new music purchases to our "device" b/c our "device" never comes up.

iTunes 11: Show Sidebar and Status Bar

Billing button appear even not GI and confirm....

Dear Expert,
Current, i'm facing problem that the the billing document button will appear even the GI button and released not completed if have more than 1 job in the service order (DBM module).
If only have i job...the action control is smooth.
I try to do config but still failed. hence, appreaciated that somebody can help me to resolved my problem....
For more info, i'm using DBM5.
rgds,

Hi,
Check copy controls between sales document and billing document .
Goto VTFA, Select the line and double click on items.
Select the item and choose details.
Copying requirements 023, This routine will check billing blocks of sales document items..
Regards,
Chandra

Action billing button appear even button confirm and post gi not done yet..

Dear Expert,
Current, i'm facing problem that the the billing document button will appear even the GI button and released not completed if have more than 1 job in the service order.
If only have i job...the action control is smooth.
I try to do config but still failed. hence, appreaciated that somebody can help me to resolved my problem....
For more info, i'm using DBM5.
rgds,

I am running the TestStand 3.0 Full-Featured CVI operator Interface. This is a user modified version (perhaps something I've done has exaserbated the inherent problem).
After Loading a sequence file, run it once.
Click on the List Bar to switch back to the sequence view.
Click on the Test UUT button -- it flickers, but nothing happens.
The user waits, wondering when his test will run.
Click on the Test UUT button a second time -- this time the enter serial number box appears and the run proceeds.
Click somewhere else on the panel, perhaps using a custom feature or in response to a step generated popup.
The sequence stops at a breakpoint.
Click on the Resume button or the Terminate button-- it flickers, but nothing happens.
Click on the Resume button a second time and the sequence proceeds.

How do I get the Next Button to appear on a form?

I have a form built off of a view. I pass a parameter from a report through a link to launch the form with the appropriate values. I would like user to then be able to navigate to the next set of information from the report without having to navigate all the way back to the report. I tried to activate the Next button with the onClick event and doNext function but the button never appears to the user. Thank you for any assistance!

Samuel,
The reason that you don't get the "Next" button is that the query that the form is running on returns only one row. Take a look at EXAMPLE_APP.EXAMPLE_SQL_REPORT and EXAMPLE_APP.EXAMPLE_FORM. You'll find that this form also does not show the "NEXT" button when called from the report. However if you edit the report and change the link parameter from empno to deptno, you'll find that the button comes up in the form.
I guess the best option you have is to create a custom button that simulates the functionality of the NEXT button i.e. have some logic to find out which empno must be the next one and then call the form like this :
l_empno := <whatever logic you have come up with>
l_url:=<portal_schema>.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=<module_id of the form>&p_arg_names=empno&p_arg_values='||l_empno||'&p_arg_names=_empno_cond&p_arg_values='||<portal_schema>wwv_standard_util.url_encode('=');
<portal_schema>.wwa_app_module.set_target(l_url, 'CALL');
Hope that helps,
Hsiu

HT204291 Trouble Mirroring-Mirror Button No Longer Appears

I recently have been experiencing problems mirroring my ipad (4th gen) and my Apple TV (3rd gen).Over the last few months I have been able to mirror successfully; however, recently the mirror button no longer appears on the ipad. I first thought the two devices might not be on the same WIFI, but I have checked and they are on the same one (I even checked all the information on the wireless and they both match.) I thought maybe they needed updating, nope, they are both as currently updated as possible. I additionally thought airplay was turned off on either device, but I have checked both and they are both turned on and able to airplay. I have restarted both devices and even unplugged the apple TV. I also tried rejoining the same WIFI with both devices. Still no luck. I have checked to make sure that the ipad is not thinking it is airplaying to some other devices, as I have speakers that it can airplay to as well. Weirdly enough the ipad can communicate and connect through airplay with the speakers, but still does not pick up the apple TV. Does anyone out there have any ideas?
Cheers

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Restart your mobile device.

HT1320 Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

Apple TV mirroring issues even with Mac mini,airport extreme bought at the end of last year,and an iPad 2

I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
and plays properly.
Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
Thanks again.
JP

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

HT201335 Mirroring button never appears, even with prereqs...

Similar Messages

Maybe you are looking for