HT201335 Mirroring for Iphone 4. Does not work..

I really wish I could mirror with the Iphone 4. We bought 4 Apple tv's yesterday only to find out the mirroring function wasnt avaliable. NOT a happy customer!!
I know Apple tv can do much more but the mirroring feature is pretty cool. I guess the salesman pulled a fast one on me. He told me it would work on my Iphone 4 with no issues at all..

The only time I had trouble like this is when I edited a photo and resynced it after it was already included in a project.
I had to delete the project and start over. You said you have tried this to no good.
Try posting at the imovie site and maybe someone there can help.
http://discussions.apple.com/forum.jspa?forumID=1379

Similar Messages

Adobe Videobite for iPhone 5 does not work

Hi,
I have been using Adobe Videobite for the last few months and I like the app very much. I use it often for cherishing sweet memories of many families who are my friends and relatives.
For the last couple of days, I am able to create the video but unable to save to camera roll. When I try to save, the page shows as disabled and gets hanged. I will have to remove the task to enter into the app again. I tried deleting the app and reinstalling the same. Still I am unable to create a video now.
Please help. I wanted to save my video files like before. Thanks.

Suggestion... cancel your contract and go to AT&T. Sounds like you might be happier there, especially if you are going to blame Verizon for something that Apple decided on (the inability to do voice and text at the same time).If you had a replacement pending at the time you requested the worry-free return, then I can see them denying it until you got the replacement phone and they got the return or you paid the full cost amount of the phone. Other than the known warts of a new phone version (both design and OS) that are well published I've had nary a problem with either the 32GB one I originally got on release date or the 64GB one that I replaced it with. Personally for me it's going to be a keeper (and I'm a Android guy from the get go).
Not trying to be a smart (deleted content to comply with VZW ToS), but unluckily some folks just have bad luck. It was hard to tell in your rambling statement what the iPhone 4 signals were compared to the iPhone 5 (are you in a 3G only area or are you in an LTE area). It almost sounds like you are on a fringe signal area with that short of talk time, which would pull the battery down as it searches for signal incessantly if you don't have one or just a marginal one.
Message was edited by: Verizon Moderator (M)

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

Air 2.7 and MacOs Lion: iPhone packager does not work

hi. After upgrading from Snow Leopard to Lion the iPhone packager does not work. It throws an error concerning the Application Version Number. Is this a Know bug? Is there a work- around? Thanks. Michael.

Yeah sorry, the start of my descriptor looks like this:
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<application xmlns="http://ns.adobe.com/air/application/2.7">
<id></id>
<versionNumber></versionNumber>
<filename>d</filename>
<description/>
<name></name>
When I go to compile the app the compiler inserts that line into my descriptor at the very bottom (just before the application tag closes). It's weird, I tried setting the <application xmlns="http://ns.adobe.com/air/application/2.7"> back to 2.6 and it works and seems to compile in 2.7 (as I noticed the timer bug).
Anyway, I only tried 2.7 because I heard the GPU fullscreen bug had been fixed, but given that the timer issue still remains I'll go back to 2.6 for the time being.
Thanks

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

Upper speaker in my new iPhone 4 does not work properly. I hear strange sounds instead of speech. What to o?

Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!

A couple of other things you can try -
With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
- Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
- In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
- Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
- Delete and re pair your iPhone from your Toyota system
Hope something here helps. Thanks

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?p

can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?

The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?

i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

[svn:fx-trunk] 7473: Fix for 'ant asdoc' does not work.

Revision: 7473
Author:   [email protected]
Date:     2009-06-01 12:09:26 -0700 (Mon, 01 Jun 2009)
Log Message:
Fix for 'ant asdoc' does not work.
It should now work from both svn and package zip.
Bugs: SDK-15306
QE Notes: None.
Doc Notes: None.
tests: checkintests
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15306
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml

Back light iPHONE 3 does not work, how to repair? I have tried all settings, nothing works

Back light of my daughter's iPhone 3 does not work anymore, I have tried all settings and even did a hard reset, nothing helps.
Can you help me? Thank you.

You usually copy the screenshot to the clipboard and paste that image in an image editor program like Paint. Then you can save the image as a .jpg or .png file.
http://www.wikihow.com/Take-a-Screenshot-with-the-Snipping-Tool-in-Vista
http://www.microsoft.com/windowsxp/using/setup/tips/screenshot.mspx
http://en.wikipedia.org/wiki/Screenshot#Microsoft_Windows

My Wi-fi iphone 4 does not work pleas help

my Wi-fi iphone 4 does not work pleas help

What troubleshooting have you done?
Can you explain in detail by "does not work"

HT201335 Mirroring for Iphone 4. Does not work..

Similar Messages

Maybe you are looking for