HT201335 on macbook pro os x v10.8.3 why does AirPlay Mirroring for ATV shut off by itself? Can the time be adjusted?

AirPlay Mirroring foe ATV shuts off automatically when using my MBP OS X v10.8.3. Is there a setting that allows choices for the length of time before the shut off occurs?

For info about memory pressure:
http://support.apple.com/kb/HT5890
OS X Mavericks: If your Mac runs slowly?
http://support.apple.com/kb/PH13895
Startup in Safe Mode
http://support.apple.com/kb/PH14204
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Similar Messages

I have a MacBook Pro OS X v10.6.8, when I turn on it stay searching. Also I need the software.

I have a MacBook Pro OS X v10.6.8, when I turn on it stay searching. Also I need the software, I lose mine.
Tengo una MacBook Pro OS X v10.6.8, cuando la prendo se queda en la primera pantalla gris, pensando. Ademas perdi el software de ella. Que puedo hacer al respecto?

If you are asking about how to get the 2 discs that came with your mac..you need to call Apple and give them the serial number associated with your mac and they will send them to you for a fee (I dont know how much it costs)

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

My MacBook Pro WILL NOT START. Powers on, grey apple screen loads then shuts off

Fairly new MacBook Pro with OXLion. When I try to turn on the computer, the startup noise and screen appear (grey loading screenwith apple icon). A loading bar at the bottom of the screen fills about a third up, then the computer shuts down again.
ANY HELP?????????

Power off the Mac, press option, command,power button. Just press them at the same time for a second. Then try power up. If still no joy, try a safe boot. With the Mac powered off, press power button and hold shift key down, this boot will take longer so be patient, continue to hold the shift key till you see the progress bar come up and the spinning gear, you can then release the shift key and let it finish booting. Your login window should come up try logging in. Check some of the applications and see if they seem to function correctly, in safe boot mode only essential OS applications are launched, if all is normal try powering off and rebooting in the normal mode. If all is well in safe mode itmight mean some third party software could be causing the problems.

Macbook Pro won't boot past grey screen with Apple logo and then shuts off

This is a long story...
This morning, I would turn it on and it'd go to the grey screen with the Apple logo for a few seconds and then go to the icon that is a circle with a line through it. After reading online, I was able to boot it up in Safe Mode. I messed around a little bit in system preferences thinking I could fix it on my own, not really knowing what I was doing (I'm a *******). I went to Startup Disk in Preferences. I chose the MAC OS X, xxxx and then clicked the lock to prevent further changes and then clicked restart.
Now when I turn on the macbook, it goes to the grey screen with the Apple logo for at least two-three minutes and then just shuts off. Won't boot into Safe Mode now. Please help. I already tried the Command-Option-P-R keys trick like five times.

If you have a full retail DVD for 10.6 you can boot from that by holding the C key during startup...but you will then be in install mode if that is what you want to do. At least go ahead and see if it will boot ok from the 10.6 disk and then you can decide what you want to do further.
Apple does not have 10.5 for sale anymore from what some other users have said on here so if you want to go that route you will have to find a copy for sale such as from eBay or one of the Mac resellers.
Before taking the machine to someone, try booting from 10.6 and see if that works...that way you can narrow down problems the machine may be having.

HT204382 I purchased icloud on my iPhone but i don't know how to coordinate with my macbook pro or add info like music. Does all of my activity show up on both of the devices? Also how do I find the iphone with the macbook or ipad that I plan on purchasi

I dont know how to use icloud on the mac book when I bought it on the phone..I need to know how to find the iphone with my mac book

http://www.apple.com/iphone/icloud/

How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

How can I upgrade Boot camp 3.0.4 on macbook pro (os x v10.6.8)?

Apple Software Update in Windows or manually.
Recent updates:
Boot Camp Software Update 3.3 for Windows
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.2 Update for iMac (early 2011)
Boot Camp 3.2 Update for MacBook Pro (early 2011)
Boot Camp Software Update 3.2 for Windows 64 bit
Boot Camp 3.0, Mac OS X 10.6 FAQ
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions
http://www.apple.com/support/bootcamp/

Madinmumbai, I have a MacBook Pro OS X v10.6.8, when I turn on it stay searching. I need the Installation software, I lose mine. Were I can get it?

Madinmumbai, when I turn on my MacBook Pro OS X v10.6.8, it stay searching. And I need the software Installation. I lose mine. Were can I get a copy?

If you are asking about how to get the 2 discs that came with your mac..you need to call Apple and give them the serial number associated with your mac and they will send them to you for a fee (I dont know how much it costs)

Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the extension gallery. Appreciate any advice?

Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the safari extension gallery. Appreciate any advice?

but i've not been able to install any programs from the safari extension gallery
In order to use the Safari Extensions Gallery you need to upgrade to Snow Leopard v10.6
See system requirements here: http://www.apple.com/safari/download/
If you want to upgrade to v10.6, make sure your Mac meet's Snow Leopard's - Technical Specifications
Purchasing available here > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

The current version of Aperture requires 10.7.5 or later.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine

I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering "diskutil list; diskutil cs list; mount" and "diskutil info disk2." Then I entered the command "sudo got show disk1."   I am sure I have made the problem worse. Can you give me some help? Thank you. blelambert
Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         250.1 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
                                 Logical Volume on disk0s2
                                 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
                                 Unlocked Encrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 TB     disk2
   1:         Microsoft Reserved                         134.2 MB   disk2s1
~ belambert$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
    =========================================================
    Name:         Macintosh HD
Status:       Online
    Size:         250140434432 B (250.1 GB)
    Free Space:   8921088 B (8.9 MB)
    |
    +-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     250140434432 B (250.1 GB)
    |
    +-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Complete
        Conversion Direction:    -none-
        Has Encrypted Extents:   Yes
        Fully Secure:            Yes
        Passphrase Required:     Yes
        |
        +-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
            Disk:                  disk1
            Status:                Online
            Size (Total):          249779191808 B (249.8 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (unlock and decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
~ belambert$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
~ belambert$ diskutil info disk2
   Device Identifier:        disk2
   Device Node:              /dev/disk2
   Part of Whole:            disk2
   Device / Media Name:      WD My Book 111A Media
File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
belambert ttys000                   Wed Mar 11 17:34 - 17:39 (00:05)
belambert ttys000                   Wed Mar 11 17:33 - 17:34 (00:00)
wtmp begins Sun Mar 8 14:40
~ belambert$ ~ belambert$ diskutil list
-bash: :~: command not found
~ belambert$ /dev/disk0
-bash: /dev/disk0: Permission denied
:~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
~ belambert$    0:      GUID_partition_scheme                        *251.0 GB   disk0
-bash: 0:: command not found
:~ belambert$    1:                        EFI EFI                     209.7 MB   disk0s1
-bash: 1:: command not found
~ belambert$    2:          Apple_CoreStorage                         250.1 GB   disk0s2
-bash: 2:: command not found
~ belambert$    3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
-bash: /dev/disk1: Permission denied
~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
~ belambert$    0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
-bash: 0:: command not found
~ belambert$                                  Logical Volume on disk0s2
-bash: Logical: command not found
~ belambert$                                  7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
-bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
~ belambert$                                  Unlocked Encrypted
-bash: Unlocked: command not found
:~ belambert$ /dev/disk2
-bash: /dev/disk2: Permission denied
~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
:~ belambert$    0:      GUID_partition_scheme                        *2.0 TB     disk2
-bash: 0:: command not found
~ belambert$    1:         Microsoft Reserved                         134.2 MB   disk2s1
-bash: 1:: command not found
~ belambert$ ~ belambert$ diskutil cs list
-bash: ~: command not found
~ belambert$ CoreStorage logical volume groups (1 found)
-bash: syntax error near unexpected token `('
~ belambert$ |
-bash: syntax error near unexpected token `|'
~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
-bash: +--: command not found
~ belambert$     =========================================================
-bash: =========================================================: command not found
~ belambert$     Name:         Macintosh HD
-bash: Name:: command not found
~ belambert$
-bash: 3:: command not found
~ belambert$ /dev/disk1
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
:~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)

racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

My Macbook pro is rejecting my Iphone 5 charger. When ever I plug it in it says that the usb is taking to much power, yet when i plug in a different Iphone 5 charger it works fine. I'm just wondering why this is happening and how to fix it?

My Macbook pro is rejecting my Iphone 5 charger. When ever I plug it in it says that the usb is taking to much power, yet when i plug in a different Iphone 5 charger it works fine. I'm just wondering why this is happening and how to fix it?

My Macbook pro is rejecting my Iphone 5 charger
Do you actually mean the white cable with a lightning plug on one end and a USB on other
If so that is not the charger ,that is the cable
The charger is the device that plugs into the mains socket
If so
cable may be faulty if less than 12 months old take it to Apple Store genius bar for checking

I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad?

MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

The firmware update corrects an error that may occur, however the techs would have checked the condition of the battery prior to installing a new one. If the battery was questionable, the firmware update was really not too important.
You can check the battery condition by going to the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about Cycle Count, Condition, Capacity: Condition anything but Normal needs to be checked and may need to be replaced.
The cycle count of 1,000 charge cycles is the typical life of a Lithium-Ion battery, the point at which the capacity drops to 80% of the as built capacity.

HT201335 on macbook pro os x v10.8.3 why does AirPlay Mirroring for ATV shut off by itself? Can the time be adjusted?

Similar Messages

Maybe you are looking for