HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?

Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Similar Messages

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

What's wrong with the built-in keyboard on my macbook? The caps button does not work rite, no matter what letter button i push they all come out capitals and the number keys when pushed display the special characters instead of the numbers!

the built-in keyboard on my macbook is not functioning right, the number keys when pushed display the special characters instead of the numbers,
the caps button doesn't work at all, the letter buttons display capitals when pushed whether the caps button is on or off, the shift keys are also out of whack!!
It seems it somehow got relocated to the "0" button because if you push and hold the zero button down the keyboard seems to operate normally, the number keys display numbers when pushed the letter keys display lower case when pushed but release the zero button and your back in the twilight zone!! Can anybody help me resolve this issue? one more thing im using an external usb keyboard right now and it seems to function properly if that helps any.

You would do better in the actual macbook pro forums (this is not).

How can I perform the LINEST function using the new version of Numbers? The old method of using "command enter" to complete the array function does not work. Please help ASAP!!!

LINEST function using Numbers for Mac

Thank you for your help. This page is somewhat helpful, but I still don't quite understand. I am using the Numbers program, and my assignment calls for me to use the LINEST function to return a set of 10 values.
When I googled how to do this, a lot of pages mentioned hitting "command+enter" to complete the array function, but they were using an older version of Numbers and it doesn't do anything when I try it in the new version. I tried using "Index" with LINEST, and i've managed to get about 5 values out of it.

The Find function does not work with one of my pdf files

I uninstalled whatever version of the reader that had been my computer at installed 11.0.06. Same problem. Seems like the Find function has a problem with just one of my many pdf files.
For the problem file, the PDF Producer was IIPDFLib2.x, version 1.5. Fast Web View: Yes.
Windows 8.1
Rebel1

I can not select any text, either individual letters or sequences of letters. If I left-click and drag while holding the left button down, I generate a rectangular selection. I can then Ctrl-C the selection and paste it in Word.
So it is a image, with a pdf filename ending rather than jpg or something similar. That probably also explains why the image quality is much worse than with genuine PDF files.
Thanks,
Rebel1

I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?

stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
Oh. Gosh. What's Windows got to do with anything? You're on Leopard, on a Mac.
It seems from other discussions my current OS on my laptop is the reason why it won't sync

I have a ipod 2nd gen it is full cannot delete,the sync button does not work,says use cd that came with ipod

ihave a ipod 2nd gen it is full cannot delete,the sync button does not work,says not used anymore,says use a cd that came with,,also cannot download itunes store,it says ios is out dated

If you can't copy your purchases by right clicking on it in the device list and choosing "transfer purchases", download the apps again for free: http://support.apple.com/kb/HT2519
Music can only be downloaded once.

Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

Why when viewing Hotmail the "Close Ad" does not work?? Unfortunately Tested OK with I.E.

Why when viewing Hotmails for example the inbox there is a "Close Ad" clickable feature that allows the inbox to go full screen.
If used the "Close Ad" does not work and there following error is recorded :
support.mozilla.com : server does not support RFC 5746, see CVE-2009-3555
I tried it with the Unfortunately Tested OK with I.E.

Bjorn,
Can you please tell me what versions of OC4J and JDK you're using, as well as what o/s?
Thanks,
-Lee

HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?

When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?

Does it work OK otherwise?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable and USB port and/or charging source
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS2972 I got a new computer. Apple TV states "to access your itunes on apple TV, turn on home sharing using.. I have done this. Still does not work

I got a new computer. Apple TV states "to access your itunes on apple TV, turn on home sharing using.. I have done this. Still does not work. Can anyone advise me on why - it was all working great before i switched computers

You mention doing all of the above, what would that be exactly?
The article linked above is for airplay, have you checked home sharing tips?
http://support.apple.com/kb/ts2972

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

Similar Messages

Maybe you are looking for