HT201343 AirPlay Mirroring. The ATV3 screen goes black.

When my mid MBP 2011 connects via AirPlay Mirroring. Mountain Lion. The screen goes black. It has worked before. Now it doesn't. I checked firewall, graphics switching and rebooting all devices.
Streaming via iTunes works fine. ATV3 can access my MBP's library.
thanks!

Problem solved... sorta!
It appears that Parallels 7 is not compatible with Airplay Desktop Mirroring in ML
If you remove this file com.parallels.desktop.launchdaemon.plist
inside
/Library/LaunchDaemons
then reboot.
ATV3 now works again with Airplay Mirroring.
However, it breaks Parallels. And you simply cannot put the com.parallels.desktop.launchdaemon.plist file back inside /Library/Daemons. You need to re-install Parrallels. Could be a permissions thing, but I tried to repaire and follow Parallels instructions on how to start and stop the service.
I Hope this helps save someone some time...

Similar Messages

I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

HT3964 my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually s

my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually started and I have the dashboard appear but then the screen freezes

Since you have Lion v10.7.4 installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How can I play an audio file without the whole screen going black?

When I play the mp3 file on IE it opens in a small screen so I can still see the web page.
On Firefox the whole screen is taken up with the sound file being played.
Can this be changed?

Is that file played in a tab in the current window or in a separate pop-up window?
Are you allowing pop-up to modify the window size (dom.disable_window_move_resize = false)?
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
You can try set the Boolean pref media.windows-media-foundation.enabled to false on the about:config page to disable the built-in HTML5 media player.
*http://kb.mozillazine.org/about:config

Every time I close my lid to my Macbook Pro, the computer screen goes black and restarts before I can use it again. Any idea how I can fix this?

It's been going on recently and even though I've tried to do an Software Update and click "sleep" before closing the lid, nothing seems to work...
Has anyone else had this problem and would have recommendations on how to fix it?
Thank you!

I think the behaviour of closing the lid has changed between "before Lion" and "since Lion" - which OS version do you have? There is a free utility called InsomniaX that help control this behaviour - see http://semaja2.net/archives/206 for more info.
Good luck and let us know how it turns out.
-Bob

Firefox 4 RC2 seems to have a problem correctly displaying. Small to large black boxes appear all over it, and change places when I move my mouse. Sometimes the whole screen goes black. Never had that problem before.

''locking as a duplicate - https://support.mozilla.com/en-US/questions/794271''
Here is my computer information.
Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i7 720QM @ 1.60GHz 43 °C
Clarksfield 45nm Technology
RAM
4.0GB Dual-Channel DDR3 @ 532MHz (7-7-7-20)
Motherboard
Alienware (CPU 1)
Graphics
Generic PnP Monitor (1440x900@60Hz)
ATI Mobility Radeon HD 5870
Hard Drives
244GB Seagate ST9250410AS (SATA) 34 °C
Optical Drives
HL-DT-ST DVD+-RW GA31N
Audio
ATI High Definition Audio Device
I have never had this problem with the current version of Firefox. I uninstalled the RC2, because I couldn't see what was going on half the time.

It does work, and fixes other weirdness like issues on facebook. '''However '''you need to restart Firefox for it to take effect as simply reloading a page after changing the setting made no effect.

TV Screen goes Black - Airplay and ATV3

Hey there,
I had been using airplay and had no issues at all. I have been trying to use it today and it won't work.
As soon as I turn AirPlay mirroring on my mac the tv screen goes black.
As a test I used airplay with my iphone and it worked.
Someone has posted a similar question but his solution did not work for me, I did restart both ATV and mac and still have the issue.
Could anybody help?

For me, Problem solved... sorta!
https://discussions.apple.com/message/19417133#19417133
It appears that Parallels 7 is not compatible with Airplay Desktop Mirroring in ML
If you remove this file com.parallels.desktop.launchdaemon.plist
inside
/Library/LaunchDaemons
then reboot.
ATV3 now works again with Airplay Mirroring.
However, it breaks Parallels. And you simply cannot put the com.parallels.desktop.launchdaemon.plist file back inside /Library/LaunchDaemons. You need to re-install Parrallels. Could be a permissions thing, but I tried to repaire and follow Parallels instructions on how to start and stop the service.
I Hope this helps... If you don't use parallels, then it still could be something in the /Library/LaunchDaemons or /Library/LaucnhAgents directories

During normal operation the screen goes black???

Hi! For the past few days, I'll be reviewing email(Mac) and/or looking at a web page (CNN or eBay) and all of a sudden the computer screen goes black. The mouse will not work, no keystrokes work either. I have to press the on/off switch on the computer, hold it until it shuts down and then restart the computer. I've reset Safari, emptied cache and that's about all I know to do. This problem is very annoying. Any help would be GREATLY appreciated!!! Thanks

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Screen goes black when hooking up to TV via mini-DVI to video adapter...

Hello,
Ever since I upgraded my PB12" to 10.5.x (now running 10.5.5, but this issue has been there since upgrading to 10.5.1), when I hook up the mini-DVI to video adapter (different adapter than for hooking up to an external display as the mini-DVI to video adapter has composite and sVideo out) to my TV, the PB screen goes black. It's set up to mirror the PB on the TV, and the PB continues to run, picture works on the TV, but I loose picture on the PB. Only way to get it back is to reboot the PB (with the mini-DVI to video adapter unplugged). So, basically, if I try and use the mini-DVI to video adapter, I loose picture on the PB. This never happened under 10.4.x — only since upgrading to 10.5.x.
Anyone have this issue? Know of a fix?
Thanks,
Kristin.

If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

PB screen goes black when TV is plugged in

I occasionally plug my PB G4 12" into the TV using the Video Adapter. This used to work fine - the desktop would span both TV and PB screen, just as it does when I have my external monitor plugged in.
But when I upgraded to Leopard this stopped working - when I plug the TV in, the PB screen goes black 90% of the time. And when I unplug the TV the PB screen stays black - I always have to shut the laptop down while the TV is plugged in and start it up once the TV is unplugged. But the PB still works fine when I plug an external monitor in.
Any ideas how to make this work again? Thanks.

Hi MrEleffe,
Welcome to the support community!
To fix any possible software issue that may be causing this to happen, please try to first back up all your data using the BlackBerry® Desktop Software and then perform a clean reload of your BlackBerry® Device Software. For further steps, please see the following KB articles.
For Windows®:
"How to back up BlackBerry smartphone data using BlackBerry Desktop Software for Windows" KB12487
"How to perform a clean reload of the BlackBerry Device Software for Windows" KB11320
For Mac:
"Back up and restore BlackBerry smartphone data on a Mac computer using BlackBerry Desktop Software" KB18776
"Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" KB19915
Please test to make sure the issue has been resolved before restoring your backup file.
If that doesn't help, then the issue may be hardware related. In that case I recommend contacting your mobile network provider again for other options.
Please let me know how you make out with that.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Laptop screen goes black when HDMI connected to TV

I have a Thinkpad Edge 431. I've set it up in Control Panel to duplicate both the laptop and the external monitor when connected by HDMI. It works fine.
When I connect it to my TV, the laptop screen black. The TV displays "No Signal" until the HDMI connection is made. When the laptop screen goes black, so does the TV screen. No sound or picture.
This was working fine until recently, and I can't figure out if I somehow changed settings to make this happen. It's clear that to me that the HDMI port on the laptop works, as does the cable.
The TV port works (I've switched the connection on the cable box to each HDMI port on the TV, to make sure they work).
I can't change anything in Control Panel when I connect the HDMI, because the screen is black.
I've updated the Lenovo system.
The other relevant piece of info: the Intel Graphics Card control panel says that Monitor/TV Settings are not supported (although until recently, I could easily display the computer on the TV).
Can anyone help with this? Thanks!

No video and audio signals to the tv connected

[SOLVED] Connecting extra Monitor, laptop screen goes black.

Whenever i connect a additional monitor through HDMI (my only output), the laptop screen goes black. If i do FN + external_monitor switch, then the laptop screen turns on but the external monitor turns off.
If you move the mouse you can feel that the desktop has been extended as i wanted, it is just that one of the screens keeps going black. The gnome display settings show both screens as active, the menu is so minimalistic that there is not much to do.
system
[cristobal@orion ~]$ uname -a
Linux orion 3.11.4-1-razer #1 SMP PREEMPT Tue Oct 8 12:31:50 CLST 2013 x86_64 GNU/Linux
As a side note, the custom kernel is almost identical to the original archlinux one, just that USB 3.0 module is disabled.
some packages
[cristobal@orion ~]$ pacman -Q nvidia-dkms bumblebee bbswitch-dkms nvidia-utils gnome-desktop
nvidia-dkms 325.15-2
bumblebee 3.2.1-3
bbswitch-dkms 0.7-1
nvidia-utils 325.15-1
gnome-desktop 1:3.10.0-1
Any ideas?
Last edited by labotsirc (2013-10-15 18:33:18)

The problem is now fixed,
For some weird reason, this time the gnome settings did work. Must have been some sort of rare bug that now i cannot reproduce.
Last edited by labotsirc (2013-10-15 18:32:53)

IPad Screen Goes Black, But Still SOUND?!?!

Hello all, As my Title, it says The IPad Screen Goes black. But when i try to scribble around I heard a noise of unlocking it. Even i tryed Home button and Power button for 10 Sec. HHHHHELPPPPP
Please Answer Quickly As Possible!

Hi there Bradvance! What is your suburb? I will try to find the nearest possible Apple Store. And have you tryed resetting it by doing this?
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
You are required to connect to your computer. Thanks!

HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?

Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

HT201343 AirPlay Mirroring. The ATV3 screen goes black.

Similar Messages

Maybe you are looking for