HT201343 I cant beleive that my MacBook cant connect to my apple tv!!!! Unbeleivable really!!!
I was looking forward to connecting my MacBook to my AppleTV to watch shows on a bigger screen and... I just checked and it says that I can't connect it with this computer! You should really get that fixed.
MacBooks are able to connect to ATV. Hyberbolic over reactions rather than actually thinking are not going to get you very far. So if you would like to calm down and start acting like a reasonable adult maybe you would care to share some relevant details? Like have you connected them to the same network? Did you enable homesharing? What feature where you using when you got the error? Did you setup and activate the ATV?
Did you do anything of the things needed to setup your ATV, or did you just plug it in and as soon as you got an error freaking and post this?
Similar Messages
-
I cant connect to my apple id from my ipad
I cant connect to my apple id from my ipad and i can use my apple id from my cellphone
Folks with the failure to verify issue have been having to reestablish their network services. There are differing approaches to this as you can see in this thread. Different things have worked for different folks, but installing the 10.6.8 update combo is not one of them.
https://discussions.apple.com/thread/3175514?tstart=30 -
I cant connect to my apple store
I cant connect to my apple store this error is your computer canot to verify please contat support
Folks with the failure to verify issue have been having to reestablish their network services. There are differing approaches to this as you can see in this thread. Different things have worked for different folks, but installing the 10.6.8 update combo is not one of them.
https://discussions.apple.com/thread/3175514?tstart=30 -
How to get my macbook to connect to the Apple TV?
How to get my macbook to connect to the Apple TV in a strange apartment? I am housesitting for someone for a few months. They mentioned that i would be able to use their Apple TV to play stuff from my macbook. I am using their basic wifi in the apt, which works fine on my macbook and iphone, but see no Apple TV icon appearing on macbook screen, nor any connection happening. (nor is there anything connection w my iPhone). What gives? How can I establish a connection?
See
http://support.apple.com/kb/ts4215 -
How can I use my Ipad in a hotel that only has ethernet connections? The Apple store clerk told me that travel express won't work in my hotel unless I also have a computer.
The issue with the Airport Express (or any of the Apple routers) is that you need the Airport Utility to configure it. Airport Utility works on OSX and Windows, but not on the iPad (or iPhone or iPod Touch.) It will work, if you can preconfigure the Airport correctly ahead of time, but you'd be stuck if you did need to reconfigure while at the hotel.
You can use most any other router that is configured with a web page, which means you have a chance of configuring with Safari on the iPad. If you want something somewhat portable, I use a "travel router" made by D-Link. The current model is the DAP-1350. Other companies make similar travel routers, but I have no experience with the others. -
My Linksys WRT54GS says that I am not connected to the internet, but I really am.
The Linksys EasyLink Advisor is telling me that there is a problem and the internet connection is not working.
However, my computer and every other computer and laptop connected to this router can get on the internet perfectly fine without any problems.
Why is it saying my connection is not working when it really is? How did I get rid of this message?Probably you need to uninstall the software to eliminate that problem.
-
Cant connect itunes tu apple tv
I cant connect apple tv with Itunes, dosent appear in the device list
Welcome to the Apple Community.
I'm a little confused as to what the problem is, are you saying your MacBook doesn't work with the Apple TV, but the MacBook Pro does.
Have you tried pairing the library on the MacBook or are you just expecting the MacBook to see the Apple TV because the MacBook Pro does. -
I cant connect to the apple website, itunes or the app store?
Hi there I had this issue on my macs and found a fix by changing the DNS server (Im not a techie so followed some online advice). I now have what appears to be the same problem on my ipad. All other websites work fine. Just anything to do with apple wont open, including itunes and app store. Ive reset the network settings but still no joy. Any ideas? Software is up to date and website, itunes etc work fine on my Macs on the same wifi....
Any help much appreciated.
RichardHow are you creating your wi-fi network? Are you sharing a connection from a Mac over the AirPort card? Or are you connecting to a router?
Ideally your router is configured to supply DNS service. But with your Mac you can override that in your network settings. You can also override that in the iPad Wi-Fi settings. But based on how you are creating your network would dictate the best approach. If you are sharing the Mac's connection over AirPort, then the iPad is using whatever DNS service that the Mac is using. If your network is coming from a router, then the iPad's service is whatever the router is providing. You can try overriding the router by going to Settings/Wi-Fi and tapping the arrow to the right of your network. Then tap DNS and enter the DNS service's address you wish to use. -
I cant connect to my apple tv with my mac the icon isnt appearing
the apple tv no longer is appearing on my mac or phone and im trying to play a movie of my mac?
Hey compo709,
Thanks for the question. If I understand correctly, you want to watch a video to the Apple TV. I would recommend that you read this article, it may be able to help the issue.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
My iPhone 6 won't cant connect to the Apple Store help
My iPhone 6 comes up with the message can not connect to the Apple Store? help what do I do to fix this?
Start with a restart of the phone.
If a restart dosen't help, try to reset the settings (Settings > General > Reset > Reset All Settings)
If the reset of the settings doesn't help, then do a full reset of the device (Settings > General > Reset > Reset All Content & Settings) IMPORTANT: MAKE A BACKUP OF YOUR DATA FIRST -
I keep getting a message that my ipad2 cannot connect to the apple store.
I get onto the apple Store site and can see everything, but when I try to get a new app or update an existing app, I can't get a download, and get an error message instead. Anybody know why?
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
I can connect my Mac book Pro, running 10.8.3 to my apple TV. However, it is very laggy and does not stream well at all. Does anyone have any suggestions?
close programs on the mac you are not using
get a faster internet router to be sure it's not the bottleneck
are two options -
Macbook Early 2007 with 10.6.8 cant connect to 5Ghz WiFi
Hello there,
I have macbook early 2007 and already installed 10.6.8, today i found out that my macbook cannot connect to 5Ghz WiFi network, when i check the system profiler it shows that my aircard only support channel 1-13 which is 2.4ghz only, aircard region is APAC and Country Code: ID. is there any possibility to set my aircard to use the 802.11a since it is supported (aircard shows 802.11a/b/g/n)
My AP is Ubiquiti Rocket M5 which supports only 802.11a/n.
Interfaces:
en1:
Card Type: AirPort Extreme
Firmware Version: Atheros 5416: 2.1.14.6
Locale: APAC
Country Code: ID
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
Status: Connected
ThankyouWhilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other -
My sister's macbook cant connect to wifi. It said that "no airport card installed". What should we do?
Help us to solve this problem.Depends on whether or not the machine is under warranty or not. If it is, just take it to an applestore and let them worry about it. If not, your airport card may have failed and may need to be replaced. It could also be that the card needs to be reseated, which is what I would check first. Look for a guide at ifixit.com.
-
While restoring password on my MacBook, cant connect wifi
I tried to restore my MacBook account password. It put me to the restoring menu and asked to enter my Apple ID and password. The problem is when I am in that menu MacBook cant connect wifi. I tried to connect it during the loading (holding ctrl), but in this way it disconnects and puts me to that menu again, so I cant enter any menu to connect wifi, it only asks me to choose the language and than continues with this password resroring menu. What I have to do?
OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Maybe you are looking for
-
i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al
-
Guys, We did some testing on a non-partitioned tables with LOB and it all worked.. Here is the case Check for lob segments to be shrinked SQL> select table_name, segment_name from dba_lobs where owner='STR'; TABLE_NAME SEGMENT_NA
-
TS3276 When i receive a message in Mail it does not appear in my inbox
When i revieve a message in mail it does not appear in my in box until i click away from the in box by going into sent mail and then returning to the in box, this has only started happening since i have moved onto Maveric OS, any ideas anyone?
-
Xws-security returns always HTTP 200
Hi, I am using libraries of JWSDP 2.0, jaxws and xws-security. My web service was generated from a WSDL schema and works so far fine. I need to secure the transportation with a xml signature. For that I am using the xws libraries. My problem is that
-
i have an iPod touch 2nd gen, and whenever I attempt a restore through iTunes, it gets to the progress bar with "Restoring iPod Software", but it hangs at almost around 99%. It does this every time, whether I try it in Recovery or DFU mode. Obviously