HT201343 Why doesn't my volume airplay to tv along with picture?

I'm watching March Madness basektball at NCAA.com and the volume won't airplay over to the TV. Other websites do it just fine.
Any suggestions to remedy the problem?

I'm having the same issues. I am using the iPhone 3 version 4.3.3 and I am trying to play movies on my TV that I purchased from iTunes using the Apple composite cable attached to my iPhone. There is sound but no video. You can see the movie playing on the iPhone but the movie does not play on the tv. However, if I go into music videos under my iPod icon on the iPhone, those do play on the TV with sound and picture.
When you download a movie from iTunes and save it to your iPhone, does it not already save it in videos? I have them under my iPod icon on my iPhone and then I click videos to view. Music videos, TV shows and movies are all in the videos tab under the iPod icon.

Similar Messages

Why doesn't Apple Retail Store sell MacBook pros with SSD?

I have read that it is because they only sell MacBook Pros with the most reliable technology and because SSD still needs to be proven.
So many rumors Out there make the purchase decision really tough.
And, why doesn't apple offer a 7,200 rpm drive for the 13" mbp? According to the forum, the 13" can take it???
Message was edited by: Erica M31

I have read that it is because they only sell MacBook Pros with the most reliable technology and because SSD still needs to be proven.
So many rumors Out there make the purchase decision really tough.
If you are interested in SSD reliability, that is not a very simple question to answer, given that there are many factors involved in the idea of "reliability" and if you start to do some research in the area, the idea of "reliability" will likely extend to questions about performance and cost. These questions can then get rather technical, and would likely extend to "performance under specific conditions of use" and "cost versus perceived and actual benefit".
Apple currently lacks TRIM support for SSDs, but various SSDs vendors have addressed this issue in one way or another. This is typically through a proprietary implementation of the SSD controller, and, in general, how it handles garbage collection to offset the lack of TRIM support.
Although rumors may lend to the difficulty in making a decision about whether to wait for a certain technology or not, "off the cuff" user experiences also flood the posts. ABC is super fast, XYZ is faster. It is great to hear about user experience, but sometimes it is useful to go beyond these. Benchmark tests can actually size some of this up into quantitative values, but then often times benchmarks, by their inherent nature, are addressing a very specific set of circumstances. So, what their results might show don't necessarily always carry over to a use case with different parameters.
The market for SSDs is relatively new and currently there is no market standard for many of the sub-technologies that go into making one. In this sense it is a little like the "Beta and VHS" battle of old, but less delineated since even within the distinction between TRIM vs No-TRIM support, their is no shortage of proprietary endeavor to produce an SSD that does not require TRIM. And then while all of that is going on, the SSD market - aside from the TRIM / No-TRIM issue is still evolving at quite a rapid pace.
And just to wrap the whole thing up into the larger context, HDDs have obviously been around for some time now, but there is still no shortage of debate on which is the "best". Although, I will say that given their relative market maturity, HHD debates do tend to have less of the current "hoopla" and fanfare and that many SSD vendors may actually be counting on to catch your attention.

Why has my autocorrect volume become so loud, even with volume setting very low? Anyway to adjust?

Autocorrect volume is too loud; even with volume turned down,

Hi,
One thing can help is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why doesn't the volume control settings allow a greater range (on the low end)?

Maybe my ears are really sensitive, but for every iphone I've had, the lowest volume is not low enough. My phone is often louder than I want in my headphones even at the lowest setting. I find myself trying to lower the volume but ending up in silence. After putting it back up to the lowest setting, I end up clicking down again a few minutes later because it's too loud for my surroundings and situation. It's a huge volume jump from the lowest setting to completely off, and alot of times the lowest setting is too loud (even with normal buds or headphones).
The volume limiter setting only limits the upper end, but doesn't change the lower end (just makes the 16 set increments smaller in that reduced range). I know there is also an option to turn down the volume of individual songs in iTunes options, but this problem applies to all aspects of the iphone beyond just my music library (Music apps, Videos, etc.).
Why hasn't apple expanded the lower volume limits? There has to be a way, or is this not possible? Can anybody think of a way to fix this problem?

Meg St._Clair wrote:
Look for headsets with a volume control.
I did exactly this for awhile. I used to have Skullcandy Asyms with the inline volume attenuator (wheel). They've since discontinued them, and my 5 pairs are having wire connectivity issues. All their current models have iphone like volume mechanisms. The problem is most headphones with volume controls tap into the phones own volume control (so the set 16 volume increments). I also looked into using a dongle attenuator, but having the dongle hanging off the phone is just awkward and not easily adjustable.
I don't know why there can't be some form of internal attenuator option, or some other way of extending the lower range of volume.
Does anyone else have this problem of the iPhone being too loud in semi-quiet environments?

Why doesn't the desktop 'snap to grid' work with Snow Leopard?

I've recently upgraded my OS to Snow Leopard and I do a lot of work with photo folders which I keep organized on my desktop. Since upgrading the 'snap to grid' function in the view options of the desktop preferences has stopped working. For some reason the folders and files on the desktop keep snapping off the screen or on top of each other so that I cannot find them easily. I've had to turn off the 'snap to grid' and the desktop no longer looks organized and is not easy to navigate. Why is this happening? AND, how do I fix it? It seems to me the snap to grid shouldn't have gone out the window with an upgraded OS. I'm very organized and borderline OCD so this is FRUSTRATING me to no end!!!
Anyone have any ideas?

It's working for me in 10.6. Try moving this file in your Home Folder/Library to the trash -- don't empty it yet.
/Users/yourusername/Library/Preferences/com.apple.desktop.plist
When finished go back to the Desktop>View Options and select Snap to grid.
If that doesn't do it, open Terminal in utilities and copy/paste this command, then hit return. Don't attempt to type it in by hand. If you make a typo or get the spaces wrong, there could be a disaster. When finished go back to the Desktop>View Options and select Snap to grid.
rm ~/Desktop/.DS_Store

Why doesn't FF make the latest Update compatible with a Power PC G4?

I've got a Power PC G4 Mac, which apparently doesn't meet the System Requirements for the latest Update of Firefox: why not? In this Economy, I'm sure there are a lot of people like me still running Power PC's, yet now I can't even "suggest" to FF that they include us in the Update, because I "don't have the latest version"! I run my whole Office from my Mac, so it's still pretty darn good. What's with the disrespect?

Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
*http://www.mozilla.org/firefox/10.0/system-requirements/
For an unofficial Firefox 10 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes100
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ
Firefox 3.6.26 has been released, so you can update to that version.<br />
Latest Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Why doesn't the Apple support communities homepage work with an iPad?

You can't scroll. Why would apple create a site that doesn't work as intended using one of their own products?

That was fast and it works! I never knew you could do this. Learn something every day! Thanks ! Does this always work for scrolling in situations like this or does the page need to encoded in some way?

If I move a picture from one project to another in aperture why doesn't the jpeg change folders if all my pictures are referenced?

I started importing all my pictures into Aperture and have been debating whether to use a managed or referenced library. I'm leaning toward referenced, but before import everything that way, I do a couple of "test drives".
In Aperture, I moved a photo from one project to another expecting that the jpeg in finder would move from the original folder to the new one, but it didn't. Anyone know why? Is there a way to make this happen? Is it bad that I want this to happen? Should I just use a managed library. I like having control of the actual files (thus wanting to go with a referenced library).
Any thoughts?
Mark

In Aperture, I moved a photo from one project to another expecting that the jpeg in finder would move from the original folder to the new one, but it didn't.
Mark, Aperture does not store the originals organized by project, but by the date of the Import Session. So moving an image to a different project will not change, were the original file is stored.
This has a big advantage for backing up the originals. If they never move or change, you do not have to backup the originals other than directly after importing, if your library is referenced. And even incremental backups of a managed library are quicker.
Is there a way to make this happen?
You can always use the command "File > Relocate" to move the original files anywhere you want.
Is it bad that I want this to happen? Should I just use a managed library. I like having control of the actual files (thus wanting to go with a referenced library).
If it is bad, will depend on why you want to have control of your originals. If you just want to know where they are, it is o.k., or if you don't have enough space on the drive with the library and need to split the library across several drives. But it would be bad to move, edit, or access the referenced originals in any way. Let Aperture do the handling, or you will be risking broken references.
Aperture has several buil-in ways to show you the original: The "M" key will switch the Browser to the original, "File > Export > Original" will give you an exact copy of the original, or you can relocate the file to another folder. I simply open the aperture Library in iPhoto, when I want to view my managed originals. iPhoto has a command "File > Reveal in Finder > Original" that will show you also the managed originals in the "Masters" folder inside the Aperture/iPhoto Library package.
You may want to have a look at Terence Devlin's User Tip: How do I access my Photos in Aperture?
Regards
Léonie

Why doesn't the MBPr support 2560x1440 over HDMI with OSX when Windows7 (bootcamp) supports it just fine?

I purchased a 2013 MBPr 15" (the first Mac I've ever owned btw) and so far have enjoyed the experience. I purchased a large 27" high resolution 2560x1440 non-Apple display which I planned on using HDMI output for, since HDMI has no problem supporting this resolution. After receiving this display yesterday I came to the sad realization that OSX does not support 2560x1440 over HDMI. However, under further investigation I found that Windows7 in Bootcamp on the same machine will beautifully display the full 2560x1440 over HDMI.
This means that OSX is the problem, and not the MBPr since Windows7 displayed the full resolution with no issue. If the hardware can support it, why would Apple disable it in the software? Is this just their way of forcing people to use DisplayPort? Or is there hope for them fixing this in future versions?

OK. No reason to be playing games here. Just surprised that this issue hasn't been brought up here on the community boards as well. Here's the simple solution
Steve
========================================
Re: Why can't my Belkin Thunderbolt Express Dock operate my desktop speakers?
Options
07-17-2014 07:09 PM
After reaching a Level III technician in Belkin customer support today and having spent approximately 4-5 person hours on this issue, we figured out that the Sound/Output preferences in the Apple System Preferences should not be set to "Internal Speakers" but rather set to "USB PnP Sound Device".
Worked like a charm. Simple, elegant solution to a real problem, one likely to be encountered by 90% of the people who buy a Belkin Thunderbid Express Dock off the shelves of any Apple Store to use with a current generation Apple laptop or desktop computer.
But the Level III Belkin technician admmtted that this critical little piece of simple, straightforward information should have been readily available to their Level 1 techies who began helping me 5 person hours ago. Would even have saved Balkin loads of customer service support time.
And so the saga ends
Belkin owes me for helping them learn this precious lesson.
Steve

Why doesn't my fifth generation ipod nano work with my Toyota Yaris?

Hello – The charging feature on my new fifth generation ipod nano doesn’t work with the factory glove compartment adapter that came with my 2008 Toyota Yaris. It plays music, etc but does not charge the ipod when connected.
My third generation nano charged perfectly with my yaris until it was run over and crushed recently. My nano gen 5 replacement doesn’t work the same with my Yaris. Can anyone help?
Steve
[email protected]

I cannot say for sure, I don't know anything about the toyota yaris. However, if that system was built to work with older firewire based iPods, then it will not charge new USB based units. There are converters out there you can get do deal with this.
http://www.scosche.com/products/productID/1667
i

Why doesn't two-finger scrolling work for me with Yosemite?

MacBook Pro from 2010, upgraded to Yosemite and now none of my two-finger scrolling works with the Trackpad. Doesn't work on any application - Chrome, Safari, Word, anything. It's super annoying. Tried messing around with Trackpad options in system preferences, didn't help.

Hi thekidcanada,
Welcome to the Apple Support Communities!
I understand that this type of situation can be very frustrating. One troubleshooting step I would recommend would be to reset the PRAM on your computer. I know the article is written for Mavericks but the steps will be the same for Yosemite.
OS X Mavericks: Reset your computer’s PRAM
Cheers,
Joe

Why doesn't FF available for my Asus tablet with Android 4?

I have an Asus transformer 101 tablet with Android 4
I wanted to install Firefox but got a message the Firefox is not compatible with my device.
Why is it?

I believe tablet support is not yet completed. Please see this thread about using a test/development version now if you don't want to wait for the official release:
[https://support.mozilla.org/en-US/questions/930834 Why is firefox not supported on android tablets yet. If it is still under testing, why not allow users to test it on their tablets and give feedbacks]

Why doesn't my i phone 5 operate properly with the bluetooth in my 2013 auto?

Does anyone know why I cannot get my iphone 5 to mesh successfully with the bluetooth system in my new 2013 Honda Accord? It sometimes cuts out or can't hear the person I'm calling and even causes the sound in the radio to cutout?

That option comes after updating to iOS 5 or later via iTunes.
Install iTunes 10.7 on your computer and update your iPhone via iTunes.

Why doesn't anyone confess iOS6 has a problem with bluetooth??

I've posted twice now asking why there seems to be a problem with my iPhone 4s iOS6 pairing with Beats wireless headphones. No answers at all.
Is there a problem with saying "since upgrade to iOS6, apple bluetooth has had a problem"??
I read endless accounts of apple owners having problems with this and I have just bought a very expensive set of headphones which are supposted to work if I quote apple, but they simply don't. This is very poor show. With maps and now this, I question if iPhones are now worth the money??

Stupidly, I finally upgraded iPad to iOS6 last week after putting it off for ages. Almost immediately, I started having problems with the Bluetooth connectivity between my Kensington keyboard (designed for iPad) and the device. I didn't realise what it was and thought the keyboard itself had died. It stopped working altogether when I told the iPad to forget the keyboard so that I could try re-pairing.
So I bought a new one! And now I discover that the problem is almost certainly the iOS upgrade.
That's pretty inconvenient as I type almost everything on my iPad and don't have a laptop. The keyboard won't pair with my iPhone either - also upgraded to iOS6 last week.
Apple, please get your act together and sort out a fix for this. It's costing people time and money. And it'll certainly drive me to Android next time.

Why doesn't my ipad2 or iPhone 4 work with my av composite cable?

I bought an apple av composite cable and I plugged it in to my tv and iPad 2 and iPhone 4 and it did not show anything on the tv. I plugged my iPad on one of my TVs and i only heard sound. on other tv I didn't see or hear anything. Don't know what the problem is.

I'm having the same issues. I am using the iPhone 3 version 4.3.3 and I am trying to play movies on my TV that I purchased from iTunes using the Apple composite cable attached to my iPhone. There is sound but no video. You can see the movie playing on the iPhone but the movie does not play on the tv. However, if I go into music videos under my iPod icon on the iPhone, those do play on the TV with sound and picture.
When you download a movie from iTunes and save it to your iPhone, does it not already save it in videos? I have them under my iPod icon on my iPhone and then I click videos to view. Music videos, TV shows and movies are all in the videos tab under the iPod icon.

HT201343 Why doesn't my volume airplay to tv along with picture?

Similar Messages

Maybe you are looking for