HT201359 I want to change my location
Dears
I am trying to change my location but I have 26 cent and I have to use them in this matter how can I use them
By the way I allowed you to use it or clear the amount to zero , in order I can change store location to United Arab of Emirates
Your help is highly appreciated
Regards
Fahad
You can try contacting iTunes support via this page and ask if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
Similar Messages
-
Hi, I have moved to India from france and I am trying to update my payment options to the Indian visa card but it seems that no matter what I do I cant do it. I dont want to create a new ID..Plz Help!!!Just want to change my location and my payment details!! thanks in advance!!
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
I want to change screenshot location from my Solid State hard drive with OSX on it, to my 2nd storage hard drive, how do I do this?
I am aware of "defaults write com.apple.screencapture *location*" but I want to change the location to my 2nd drive which doesn't have OSX on it... everytime I've tried to insert MacintoshHD2 in there it just doesn't work... any tips?I'm having the same problem. I've entered the following path in terminal:
"defaults write.com.apple.screencapture location /Volumes/Macintosh HD 2/[my username]/Downloads"
But it's not working. It keeps going to the SSD Downloads folder.
What am I doing wrong? -
I want to change the location of my MacBook Pro. I live in Mexico but I want to have it located in the US so I can access certain sites.
I have no idea if it's legal or not, but you could use a proxy software to "spoof" your location.
-
HT201359 I want to change the password
I want to change the password
you can change the password of <sid>adm user without any issues
just check the SAP services through services.msc and check with what user it is maintained.It must be with SAPserviceSID,if it is with <sid>adm then you will need to change the password here
else there must be no impact
Rohit -
I can't figure out how to change this. I have an older PC laptop that barely has enough space to operate with itunes on it. I have most everything on an external hard drive and would like to move the photo stream folder there.
Do you mean on your Time Machine backup drive? Or are you actually accessing the backup? In either case you shouldn't be doing that. If you haven't space on your HDD to store the iTunes Library, then at least put it on another external drive.
Since you did not provide any information about what's actually "on my time machine," here's what you would do. The entire iTunes folder should be stored in the /Home/Music/ folder. Within that folder you would have three folders: imm Media, iTunes, and iTunes Playlists. -
Changing the location of archive log from flash recovery area PLZ HELP!!!
Hi All,
My archive log is being stored in flash memory area which got full and the production server went down.
alert log file details.....
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1I removed the files and started the database,
Can someone kindly tell me as to how to avoid this problem in future by keeping archive log destination in flash recovery area.
I want to change the location of archive log files, can someone please guide me as to hiow to do that
I changed the size of flash recovery area for the time being, but i am afraid it will be full again!!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.regards,
Edited by: user10243788 on Apr 25, 2010 6:12 AMuser10243788 wrote:
Hi All,
My archive log is being stored in flash memory area which got full and the production server went down.
alert log file details.....
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 43432960 bytes disk space from 2147483648 limit
*** 2010-04-25 14:22:49.777 62692 kcrr.c
ARCH: Error 19809 Creating archive log file to
'/oracle/product/10.2.0/flash_rec
overy_area/EDWREP/archivelog/2010_04_25/o1_mf_1_232_%u_.arc'
*** 2010-04-25 14:22:49.777 60970 kcrr.c
kcrrfail: dest:10 err:19809 force:0 blast:1I removed the files and started the database,
Can someone kindly tell me as to how to avoid this problem in future by keeping archive log destination in flash recovery area.
I want to change the location of archive log files, can someone please guide me as to hiow to do that
I changed the size of flash recovery area for the time being, but i am afraid it will be full again!!
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.44 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.
SQL> alter system set DB_RECOVERY_FILE_DEST_SIZE = 4G ;
System altered.
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 49.72 0 57
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
6 rows selected.regards,
Edited by: user10243788 on Apr 25, 2010 6:12 AMPointing the archive log dest (and/or the FRA) to a new location, or enlarging them, will do no good if you are not performing regular housekeeping on the archivelogs. You will just keep knocking down the same problem over and over.
If you simply delete the archivelogs at the OS level, the database will never know about it and it will continue to think the destination is full, based on records kept in the control file.
For regular housekeeping, you need to be doing something similar to this in rman:
run {
backup archivelog all not backed up 1 times tag='bkup_vlnxora1_arch';
delete noprompt archivelog all backed up 1 times to device type disk;
run {
delete noprompt obsolete;
crosscheck archivelog all;
delete noprompt expired archivelog all; -
How to change the location value after it is registered
hello,
I want to change the location (A) to a new schema. From what I am understanding, I need to unregister the old locatin(A) in repository browser, and then re-register it in control center, and change the schema name to my new target.
Now, I have unregisted A in the repository browser. When I come back to control center, and click the register, everything is grey out which means I cannot change the value (but i need to change the value for service name and schema), except the password value. and on the top, it says 'this location has not been registered. please complete the location parameters'.But I know on the old version, like owb 9.0.5, the grey out means this location is registered. So I am really comfused now. The location is unregisted, why cant I change the value of this location?
any suggestion will be appreciated.Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.
-
Not working. Change database location trough VB 6
Hi,
I just finished two reports in Crystal 10 using an Access Database (database location and query are hardcoded in the reports.
I made a small vb 6 application to launch the reports. Now I need to change database location for the reports trough VB 6. I have the following code, but it is not working. The reports do not show any data and I do not get any error. I think the problem is with the hardcoded query. The report is designed on this query and the field reference on the reports are like Command.Field1
I just want tho change database location in VB, but I want the report take the query that is in it.
I have the following code. How can I make them work.? Is there a better way to do it?
Dim Report As New CR2 'set up the report
Dim conn3 As New ADODB.Connection 'ADO connection
Dim rs As New ADODB.Recordset 'rs connection
Function F_ViewReport()
'On Error GoTo End_FormLoad
Dim sSQL2 As String
gsRootJob = "4850"
Dim sSQL2 As String
gsRootJob = "4850"
"SELECT Material.Job, Material.Indicator, PO_Detail.Order, Source.Act_Qty, Vendor.Name, PO_Header.PO, PO_Detail.Due_Date FROM (((Material LEFT JOIN Source ON Material.Material_Req = Source.Material_Req) LEFT JOIN PO_Detail ON Source.PO_Detail = PO_Detail.PO_Detail) LEFT JOIN PO_Header ON PO_Detail.PO = PO_Header.PO) LEFT JOIN Vendor ON PO_Header.Vendor = Vendor.Vendor WHERE (((Material.Job) Like '" & gsRootJob & "*')) ORDER BY Material.Job, PO_Header.PO, PO_Detail.Line;"
Report.DiscardSavedData
Set conn3 = New ADODB.Connection
conn3.Open "provider=Microsoft.jet.OLEDB.4.0; Data Source=" & App.Path & "\Data tables.mdb"
Set rs = New ADODB.Recordset
rs.Open sSQL2, conn3, adOpenKeyset, adLockReadOnly
Report.Database.SetDataSource rs, , 1
CRViewer2.ReportSource = Report
CRViewer2.DisplayTabs = False
CRViewer2.ViewReport
CRViewer2.Zoom 1
Screen.MousePointer = vbHourglass
Please help!
ccHi Cris,
It seems that you are having issue with SDK's.
Post your question in SDK forum.
[SAP Crystal Reports, version for Visual Studio;
You can download samples from here:
[https://www.sdn.sap.com/irj/boc/samples]
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Regards,
Shweta -
Not able to change file locations
I have a few video's I need to put online.
So I made a flash-file that will load a file externaly (http://.../locus.f4v). When I publish that flash file it renders a locus.swf, locus.index and a SkinOverAllNoFullNoCaption.swf (skin).
When I upload everything works fine. But to easily manage all of my video's I can't have them lying arround and would like them in a folder. So I create a folder locusvideos. I change all the links in the html-file to locusvideos/... .swf but it just shows an empty page.
so where are all the files at?
locus.html (is in the most top folder)
/locusvideos/locus.swf
/locusvideos/SkinOverAllNoFullNoCaption.swf
and the video-file is still on the same place
Is there something I'm missing?
kind regards,
Jeroenyes, but everything worksfine untill I want to change the locations of the files eventhough I update the location in the html document.
I'm looking for someone who perhaps can explain how everything links/works together en can help me how to relocate the files without problems. -
How do you CHANGE the location (away from Drive C) where Firefox stores temporary files?
I know where Firefox stores temporary files. I want to CHANGE this location away from Drive C to decrease writes to an SSD. Thank you.
Thank you.
This function may be one of the few things that IE does better than Firefox. IE lets you change the temporary file location in Tools - Internet options - Settings. Firefox developers should make this task easier and put the instructions in the Help file where they can be easily found.
Since I use an SSD for Drive C, I have learned that any file(s) that are frequently written to should be moved elsewhere to a conventional HDD. -
How to change the location of footnotes?
I want to change the locations my footnotes.
Instead of a footnote beneath the box, I want to place it in a different textbox.
Most easily is to make a textbox on a masterpage and link it with the footnote 'placer'.
I have attached a sample of I want to display my footnotes. Just beneath the page - separately -
Thank you very much for reading my question. I hope somebody knows the answer.Thank you for your reply.
Q: "What would you do if there are two or more notes in a column?"
A: Add one or two more line in the textbox on the master page, plus noting more sources next to each other. Which makes it possible to note approximately 12 sources.
But really? No way to I can get InDesign's footnotes outside the story's frame? Noway?!
Really sure about that? I use Adobe CC and I cannot believe that it isn't possible. Serious? I thought you can make every kind of lay-out with InDesign. -
How can I change the location of files? (buffers, history)
I want to change the location of my history and buffers from my SSD to a flashdisk. [Reason: to overcome wear and rear on my SSD.] How can I do this?
Open question: What other file locations (paths) should I change?You can disable the disk cache by using "Clear history when Firefox closes" to clear the Cache.<br />
You can verify that on the about:cache page (disk cache entry is missing).
The history and the bookmarks are stored in the same file and can't be separated.<br />
You would have to move the entire Firefox profile folder to that other drive or use Private Browsing mode.<br />
It is probably a good idea to make regularly backups of valuable profile data in case of drive failure.<br />
Flash drives also do not last forever and are also usually slower.
See also:
*http://kb.mozillazine.org/browser.cache.disk.parent_directory -
Change library location before installation (in MSI-File with Orca?)
Dear Forum-Users,
I want to change the file-location from the itunes-library BEFORE the installation. The standard-path is under "my documents" and "my documents" is relocated to our network share. I want to change the location to C:/iTunes/. My idea was to open the MSI-file with "orca" an change the location-settings but I cannot find this entry.
any ideas?
BRI don't know of any way to do it.
My advice is to go ahead and install itunes, and the first time you run it, do a shift-start. Press *AND HOLD* the shift key while starting itunes. Keep pressing until you get a prompt to create a library. Create the library in C:\iTunes.
You only have to do this shift-start once. iTunes keeps using the last library it opened, until you do another shift-start. -
Want to change the default save location- users have networked home dirs
I am doing some work for a school which is still using iMovie HD because it allows them to save their movie projects wherever they want. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. Currently all users/students have network home folders, so their home directory, documents, etc all pull across the network. All students are limited to 1GB of space, and the system is an older G4 Server- 2GHz with 1GB of RAM and 2x 500GB hard drives. Since the students can make some large projects transferring that data back and forth can kill the server. Currently they are staying with iMovie HD so they can save it to the local hard drive, and when the student comes back in for class they sit at the same machine- thus giving them access to their stored movie files.
This summer they plan to upgrade both Xserves, but again internal storage in the Xserve is a joke and in my opinion not planned out properly. Which might require them to use one of the Apple Promise RAID units- major financial burden on a school.
I wanted to see if there was a way to change the default save location for iMovie 08 or 09 to the local storage rather then the "Home" folder for each user.
Thanks so much!hackths wrote:
.. The issue is that iMovie 08 and 09 do not allow you to change the location in which they save their movies. ..
wrong info.
iM08/09 has a different file concept than iMHD6.
Both versions allow to store Events (=huge files) 'anywhere' to usb or firewire connected, hfs(+) formatted harddrives. the Project files (=small files) can be de-located from 'internal' drive with vers09, for 08 you have to use a socalled symLink to de-locate Project files.
Maybe you are looking for
-
Pixelated, interlaced pics after burning dvd
my first dvd I burned from the project I am working on was fine but needed a couple changes such as sound and buttons. When I burned the final DVD I am having problems with the last slide show. The last 10 pictures are coming out interlaced. Not sure
-
How to Create a View of a Query and assign it into my web template?
Hi All, I need to create 3 views for my query and show that on my web template. I have never done this before. Can you please let me know step-by step procedure to create views for a query and how to show it on my WAD report? Thanks, Satyam
-
Displaying Purchase Order Quantity
Hello, I have problem when trying to display Disp_Quan (as Quantity) from Bapi_Po_Getitems as table column on web dynpro. (I am sure data is there because I am able to popup message displaying the qty.) Thank you very much. tbluong.
-
How to open D7000 RAW file in elements 9
how to open D7000 Raw file in elements 9
-
Can't edit an excel file and can't save it in excel 2010, but the same file works fine in 2007.
I am trying to save an excel file in 2010 version but I am getting the following error: Errors were detect while saving <File Name>.Microsoft excel may be able to save the file by removing or repairing some features. To make repairs in the file, Clic