HT201362 hi, please guide me how to use the down load function! I really facing problem when selected software but can't smoothly up load?

Hi, we're any expert can teach me the best solution or software can easily down whatever good lecture or good movie can easily control and. Down loading. Very much thankful to you

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

Similar Messages

  • Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Seems no one care about us .no one replied till no@!!!!@ strange

  • Please guide me How to configure the swift integration packages

    Hi frinds,
    Please guide me How to configure the swift integration packages, in swift we have to use MT103 format
    sender side we have ERD system and Receiver side File system,
    wt adapters  we have to use in sender side and what kind of encrypt and decrypt formats support for swift in PI

    hi,
    the only reference we have is this OSS note and guides inside it
    1064419 SAP Integration Package for SWIFT: Info about installation
    Please have a look at it,
    Regards,
    Michal Krawczyk

  • Please guide me how to delete the OLD claimed trip details

    Hi SAP Gurus
    We have corrected the all the cliams by newly created an posted properly today , how ever they are struck now and since they are form old employees (2007-2008) , few are still active / terminated/ retiree staus cant delete them nor make it zero. But appear in our report as pending...
    Please guide me how to delete the old trips.. your support really appreciated..
    Thanks
    Shan

    Hi Shan,
    As per my knowledge, no table should be deleted. Check the below link for more info.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/73/6bf037f1d6b302e10000009b38f889/frameset.htm
    <<removed>>
    Thanks,
    Praisty
    Edited by: Matt on Jul 26, 2011 3:11 PM

  • A Guide on How to Use the Terminal?

    hey all, i've been looking for a guide on how to use the command prompt in Lion and haven't  been able to find anything. i'm brand new to the OS X and would appreciate any help. i'd like to learn the different commands first instead of the GUI.
    by the way, are there any guides on what to do in the first stage of setting up OS X on a mac mini?
    thanks

    I'd start here: Terminal 101.  Reading books on UNIX would be helpful too.

  • PLEASE TELL ME HOW TO USE THE I PHONE TO TAKE PICTURES

    PLEASE GIVE ME STEP-BY-STEP INSTRUCTIONS CONCERNING HOW TO USE THE I PHONE 4 TO TAKE PICTURES.

    Open the Camera app. There is a button at the bottom that looks like a camera. Tap that to take a picture. There is also a shortcut to the camera on the lock screen:
    Camera Shortcut on the Lock Screen
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

  • How To use the going back function in Safari (multitouch)? Going back on Websites ist only possible using the arrow Key on the left corner but not by using the sweep function like it is possible in macOS.

    How can i use the going back function in Safari like it is possible in MacOS? On the Mac i can chance back to previous Websites by sweeping with two Fingers. Unfortuntely is this Not possible on the ipad. I tried with one and to fingers but it doesn't work.
    The multitouch function is switched on but still Not working. What is wrong? Thx for help.

    To go back a web page in Safari touch the screen with one finger at the extreme left and swipe to the right.
    To go forward a web page in Safari touch the screen with one finger at the extreme right and swipe to the left.

  • Please guide me how to do the Outbound Porcess in ALE

    Hi Friends,
    Kindly guide me on ALE/IDOC's step by step how to work on Outbound Process.
    and the generated IDOC must be download & stored on the PC of the Sending System only in .txt file format.
    so that the XI will collect that particular file in .txt format & upload it for Inbound process.
    Thanks in Advance
    Ganesh

    IDoc Types:
    IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
    An IDoc is an instance of an IDoc Type and consists of three types of records.
    i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
    ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
    iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
    Message in IDoc Type:
    A Message represents a specific type of document transmitted between two partners.
    Outbound Process in IDocs:
    Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
    The Customer Model:
    A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
    Message control:
    Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the application logic.
    Change Pointers:
    The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
    Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
    IDoc Structure:
    A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
    Selection Program:
    Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection program’s design depends on the triggering mechanism used in the process.
    Filter Objects;
    Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
    Port Definition:
    A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
    RFC Destination:
    The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
    Partner Profile:
    A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDoc’s packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
    Service Programs and Configuration Tables:
    The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
    Process flow for Distributing Transactional Data:
    Transactional data is distributed using two techniques: with Message control and without message control.
    Process flow for Distributing Master Data:
    Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
    Triggering the Outbound Process via Stand-Alone Programs:
    Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
    The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
    Triggering the Outbound Process via Change Pointers:
    The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
    A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
    Processing in the Application Layer:
    The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
    Processing in the ALE Interface Layer:
    Processing in the ALE Layer consists of the following steps:
    • Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
    • IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
    • Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
    • Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
    • Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
    • Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
    • Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
    • Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc – Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch – ALE Service).
    • IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
    Processing in the Communication Layer:
    To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
    you can use the file port in the partner profile to store the data in the application server.once it saved in the application server it cna be downloaded to the pc.

  • Please tell me how to use the Simple bluetooth client server example.

    Hi i used the simple bluetooth client server example in labview 7.1. Iam getting an error saying your system does not support the network operation.  I have following doubts also.
    1. Should i pair the device before running the labview.
    2. Should i enable the file transfer wizard in the software given with the bluetooth adapter.
    Please help
    Thank you
    R.Prem kumar 
    09940446193

    Hi R.Prem,
    Could you please let me know what error code is associated with this error message? Also could you please provide a description of the setup you are currently using? Thanks!
    Best regards,
    Steven

  • How to use the variables of Function exit in the include program

    i have a problem of using the variables of a function exit in the include program..
    If i use those variables there will be an error indicating 'Field FEBVW_IN is unknown. It is neither in one of the specified tables nor defined by a DATA statement'. Please help... Below is the code of the function exit:
    FUNCTION EXIT_SAPLIEDP_202.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(IDOC_CONTROL_INDEX)
    *"     VALUE(IDOC_DATA_INDEX)
    *"     VALUE(FEBVW_IN) LIKE  FEBVW STRUCTURE  FEBVW
    *"     VALUE(FEBKO_IN) LIKE  FEBKO STRUCTURE  FEBKO
    *"     VALUE(FEBEP_IN) LIKE  FEBEP STRUCTURE  FEBEP
    *"     VALUE(FEBRE_IN) LIKE  FEBRE STRUCTURE  FEBRE
    *"     VALUE(FEBPI_IN) LIKE  FEBPI STRUCTURE  FEBPI
    *"  EXPORTING
    *"     VALUE(I_FIMSG) LIKE  FIMSG STRUCTURE  FIMSG
    *"     VALUE(FEBVW_OUT) LIKE  FEBVW STRUCTURE  FEBVW
    *"     VALUE(FEBKO_OUT) LIKE  FEBKO STRUCTURE  FEBKO
    *"     VALUE(FEBEP_OUT) LIKE  FEBEP STRUCTURE  FEBEP
    *"     VALUE(FEBRE_OUT) LIKE  FEBRE STRUCTURE  FEBRE
    *"     VALUE(FEBPI_OUT) LIKE  FEBPI STRUCTURE  FEBPI
    *"  TABLES
    *"      IDOC_CONTROL STRUCTURE  EDIDC
    *"      IDOC_DATA STRUCTURE  EDIDD
    *"      IDOC_AVIP STRUCTURE  AVIP OPTIONAL
    *"      IDOC_AVIR STRUCTURE  AVIR OPTIONAL
    *"      IDOC_AVIT STRUCTURE  AVIT OPTIONAL
    *"  CHANGING
    *"     REFERENCE(IDOC_AVIK) TYPE  AVIK OPTIONAL
    *"  EXCEPTIONS
    *"      PROC_ERROR
      INCLUDE ZXF08U10.
    Here is the code for the include program.
      INCLUDE ZXF08U10
    MOVE febvw_in TO febvw_out.

    Sometimes you will get this error message when checking include code in exits even though there is really no error - it happens because the include does not realise it is in the function due to the navigation index being out of date.
    Try activating the code - it may work even though the check said there were errors.
    You can also get this issue when trying to drill down on the field in the include to view its structure.
    Andrew

  • How to use the motion assistant functions?

    How do i control the velocity of the motor and the position of the motor using Motion Assistant?

    Hi Jeff -
    I'm noticing the same issue on a trial download. Error message stating I don't have permissions. Which is wierd because I have full admin access.
    I believe the download assistant tools is not requesting permission which installers typically do by prompting an js window input Admin password.
    Currently the installer is not installing to my mac's Applications folder instead asking me to save to a user/myName/
    I am on OSX 10.8.2 Please advise thanks.
    I realize that the download is not application installation, I'm on track thanks
    Best,
    Salina

  • How to use the first row function value for the rest of records

    Hi all,
    I am having a select statement like this. We are calling function enabled for each row. So it is taking
    time. As per our bussiness logic, we can use what the function 'enabled' will give for the first row to
    other rows also. so that we can avoid calling the function 'enabled' next row onwars.
    Before
    SELECT
    decode(enabled(col1, col2, col3),'TRUE','xxx', col4),
    decode(enabled(col1, col2, col3),'TRUE','xxx', col5),
    decode(enabled(col1, col2, col3),'TRUE','xxx', col6),
    decode(enabled(col1, col2, col3),'TRUE','xxx', col7),
    decode(enabled(col1, col2, col3),'TRUE','xxx', col8),
    from
    table1 t1, table2 t2 where t1.col1 = t2.col1
    After
    SELECT
    decode(enabled(col1, col2, col3),'TRUE','xxx', col4),
    decode('true/false','TRUE','xxx', col5), --Here 'true/false' is the first row value after calling the function 'enabled'
    decode('true/false','TRUE','xxx', col6),
    decode('true/false','TRUE','xxx', col7),
    decode('true/false','TRUE','xxx', col8),
    from
    table1 t1, table2 t2 where t1.col1 = t2.col1
    Any thoughts on this, how to implement this logic
    Thanks,
    Pal

    It's not clear where col1, col2, col3... etc. come from, so I've assumed they're in table1.
    with table1_X as (select enabled(col1, col2, col3) as enbl
                            ,col1, col2, col3, col4, col5, col6, col7, col8
                      from   table1)
    SELECT decode(t1.enbl,'TRUE','xxx', col4)
          ,decode(t1.enbl,'TRUE','xxx', col5)
          ,decode(t1.enbl,'TRUE','xxx', col6),
          ,decode(t1.enbl,'TRUE','xxx', col7),
          ,decode(t1.enbl,'TRUE','xxx', col8),
    from   table1_x t1 join table2 t2 on (t1.col1 = t2.col1)p.s. you'd be better leaving out the enabled function altogether and incorporating the logic of the function directly in the SQL, and then you would be avoiding any context switching which will clearly impact performance on any large amount of data.
    Edited by: BluShadow on 14-May-2013 08:26

  • Can anyone tell me how to use the loops and backing tracks with a single guitar input? I can't seem to figure out how to set this up

    I am trying to configure Mainstage to input my own guitar and add a backing track from the library or a loop but, I can figure out how to open or add the tracks I've downloaded. Any help would be great

    did you try the PlayBack preset/template?
    once you open the PlayBack plug-in you just load the tracks from the plug-in's menu.

  • Could some one please tell me how to enable the quick access function in iOS 5?

    It's the thing where you turn on you iPod, iPhone and next to "Slide to Unlock" There's a camera button does someone know how to enable it?

    Double tap the home button whilst on the lock screen

  • How to use the "Fade Wave" function in CS3?

    I have found old tutorials which reference a "Fade Wave" either filter or function under edit back in PS6, but I can't seem to find it in CS3.  Is there any way to enable this, or an add-on which includes it?

    Control-shift-f will fade the most recent filter. A lot of smoke tutorials involve fading the wave filter. Fade... is under the Edit menu, and is only selectable directly after a filter or fade-able action has occurred (such as painting with a brush or filling with pixels).

Maybe you are looking for