HT201363 'hello i am having trouble with a new iPod apple id.

hello i don't rember my security questions and i don't rember them and the email it is being sent to is vary old and i don't rember that email but i have my phone# on the account and was wondering do it that way?

See Here.  Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here  >  Apple  Support  iTunes Store  Contact

Similar Messages

  • Hello, I'm having trouble with my ipod

    hello, I'm having trouble with my ipod

    Holding down the center/select button and the menu button will reboot your ipod. See if that helps. Also, I'd recommend something else- I had nothing but trouble with my ipod classic until I spent $20 to get Mac OS Mountain Lion. It did what you said and sometimes wouldnt play, or wouldnt power on...
    Try rebooting your ipod and let me know what happens and maybe in the future obtain Mountain Lion to aide your ipod in functionality.
    Good luck!

  • TS1363 hello there im having trouble with my iphone it says connect to itunes but it wont show up on devices this is after i dun an update because upto then my phone was fine cud u help ?

    hello there im having trouble with my iphone it says connect to itunes but it wont show up on devices this is after i dun an update because upto then my phone was fine cud u help ?

    Hello aucksy,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Have a nice day,
    Mario

  • I'm having trouble with syncing my iPod to my computer.

    I'm having trouble with syncing my iPod. It gets stuck on the last step saying, "Waiting for changes to be applied." It's been doing this for the last half hour. Is there anything I can do to correct this or is am just going to have to restore my iPod?

    You can sync/manually mange iphone with one and only one computer.  If you sync/manually mange to anther, then it will erase the current content and replace with content from the new computer.
    What "trouble" are you having?

  • Anyone having trouble with the new update for 2010 mac book air 10.8.2?

    Anyone having trouble with the new update for 2010 mac book air 10.8.2 ? My 2010 Macbook Air has crashed 15times since the 10.8.2 update. Have only once since owning it.

    Turned out the hardware was bad.  Apple exchanged it for a new Mac Air and the new trackpad works great.  Thank goodness it was a defect.  If the trackpads all worked like that I would have been bummed.

  • I'm having trouble with my new iPhone.it seems it likes to turn it self off for no reason at all.i would like to know is this a hardware or software problem or just a iPhone problem i don't know.

    I'm having trouble with my new iPhone.it seems it likes to turn it self off for no reason at all.i would like to know is this a hardware or software problem or just a iPhone problem i don't know.

    basic troubleshooting steps from the User Guide are restart, reset, restore from backup, restore as new.
    Have ANY of these been tried?

  • I`m having trouble with my new advanced system the mac os X 10.0.3

    Hello everybody...
    I need Help, I would appreciated anything anybody could do to help me...
    I`m trying to install the new software the mac os X 10.0.3 and having trouble transfering all my files form the mac os 9.2.2 classic to my new system...Do i have to erase my hard drive to do a clean install???? Could I transfer my files to my home`s computer, instead of buying a portable smartdisk hard drive of 100 Gb, and then so i could transfer my fiels back to my mac without no trouble ????
    I Hope anyone could answer to my post as soon as possible, Thanks

    Hi, John. If you weren't having trouble with Mac OS 10.0.3, it would be a major surprise. OS X 10.0.x and 10.1.x were unusable beta versions and never should have been released, in the view of most people who ever tried to run them. It would be a severe trial of your patience and a waste of your time to install 10.0.3 on your Mac.
    If you want to run OS X, buy OS X 10.2.x (Jaguar), 10.3.x (Panther) or the current version, 10.4 (Tiger). All are available at reasonable prices from AppleRescue. Tiger is also available from any Apple retailer. Carefully read the system requirements for whichever version you prefer, and be sure your computer meets them before buying. If your Powerbook only has a 10GB hard drive, install a larger one (at least 40GB is sensible, since the cost per gigabyte of smaller drives is now exorbitant compared with larger units) before bothering to install OS X.
    It would be most advisable to copy everything on your current hard drive to an external FireWire hard drive, then reformat and erase the internal drive before installing OS X on it. Doing so insures that your data is all safe and that your internal drive is in tip-top condition when the new OS is installed. After performing the installation, you can copy the contents of the external drive back onto the internal drive. The external drive will then be available as backup space for the entire contents of the internal drive, including OS X, all your applications, and all your data.
    While OS 9 is still installed on your hard drive, check to make sure your Powerbook's firmware is up to date. It will need to be brought up to date while running OS 9, before you install OS X 10.2 or higher. Here is the updater for your 500MHz Tibook:
    http://docs.info.apple.com/article.html?artnum=75132
    If the firmware has already been updated, running the updater again will tell you so and will do no harm.

  • Trouble with a new iPod video (and a question)

    My new iPod video is causing my computer to freeze when I connect it. I've tried uninstalling and reinstalling iTunes. After that, it seemed to be going OK, but it only downloaded about 500m (of a total of 50g) before iTunes froze again and stopped downloading (of course the "Do Not Disconnect" icon on the iPod stayed there, but I had no choice but to disconnect it!).
    All of my music is on an external Seagate hard drive coming in through one of my USB inputs. The iPod is on the other USB input. Could this be part of the problem? I don't think it's a drive letter issue since it did start downloading the last time before freezing.
    Also, I'm wondering if I can use my old firewire cable from my previous iPod to speed up the transfer process once I actually get the thing working.
    Any help would be much appreciated!

    See Here.  Apple ID: Contacting Apple for help with Apple ID account security
    Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact

  • Having Issues with my new iPod

    Good Morning Everyone!
    I'm new to this discussion site and to iPod. I recently purchased a 30gb iPod and have been importing my CDs into iTunes. I have been adding album artwork that I have found from google. Yesterday I noticed that at least half of my artwork is wrong-- for example, I will have artwork for Staind showing on the song info within iTunes, yet on my iPod for that very same song, artwork for the Barenaked Ladies shows up. This happens with at least half of my music. (Everything on iTunes is correct-- it's just wrong on the iPod.)
    I was listening to my iPod this morning on the way to work and something else happened-- I was listening to everything that I had tagged as 80s music when all of a sudden Outkast started to play. At first I thought, OK, I just put it in the wrong playlist accidentally. However, when I looked at the iPod screen, it said that it was supposed to be playing The Cars. That happened again with several more songs. Has this happened to anyone else? What can I do to correct this problem? I'm less concerned with the album artwork. If needed, I'll clear it all out... however, songs coming up wrong is driving me crazy!
    I appreciate your input.

    Have you ever tried the art importer that someone mentioned? I was thinking of trying that to see how that works.
    I swear, I was never this obsessive compulsive before I got my iPod!!
    I wanted to tell you that you are NOT alone! The same
    problem has happened to me with my 2gb iPod nano! The
    album aret doesn't match the song playing! Also when
    I am click the song to view the album art up close,
    it is often the wrong picture, even if the one on the
    front is correct. This is seriously mind-boggling
    because I haven'tdone anything to damage it! I have
    tryed everything; I've restored it reset it updated
    stuff... I think I have to send it back!

  • Hello, i'm having trouble with installing iTunes.

    There appears an error, saying - 'policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version="8.0.50727.6195".pub licKeyToken="1fc8b3b9a1e18e3b".processorArchitecture="x86"
    I\ve tries everything, but nothing helps(

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • Hello, i am having trouble with dreamweaver cs4 justify?

    i have some text in a table and when i put justify on p
    my text gets justify but gets some spaces in between words.
    what could be causing this?
    thanks for the help.
    picture of the text

    Cary is right, that's how it works.  You need to remember that this is not like a word processor or a printing process, it's the web and text justification can cause more weirdness cross browser than what it's worth  :-)

  • Hello, I'm having troubles with the magsafe or batteries I dont know

    i connected the magsafe and it didn't charge, i went to bed and in the morning it works perfectly... what happened?? my macbookpro only have two months since i buy it

    This happened me recently and my Macbook pro is just a few months old.  I brought the charging lead and my mbp into a store and they just replaced the lead.  It works perfect now

  • Having trouble with making new internet tabs and windows

    When I open a new tab or new window, some small blank black windows appear and disappear right away. I have tried running virus scans, uninstalling unnecessary programs and deleting memory but they still pop up. Also after the blank windows disappear, there is a "not responding" after the blank windows disappear, for about 10 seconds and then resumes normal

    Well first, the version of Firefox you are running is EXTREMELY old and insecure. Please update to Firefox 11 right away. [[Updating Firefox]] can help you with that.
    After doing that, if you are still having issues, Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

  • I am having trouble with my new Mac....Help please

    I just got a new Mac G4 from my neighbor, who happens to be older, so the computer is still in great condition. The only problem is, he doesn't remember the login password! So I can start the computer, but I can't actually login. And I've tried to put the Panther reboot disc in and the restart it, but it doesn't do anything. None of the discs will even try to load when I put them in to restart the computer. Its not like the HP computer I have, whereas if I put the reboot disc in it actually works.
    This is my first Mac computer and I'm not really familiar with them that much, so if some one could point me in the right direction, other than taking it to an actual retailer and having to pay them a bundle of money to fix it, I would greatly appreciate it.

    Cool handyandy42!
    I'm happy I could be helpful, with solving your problem!
    Also, I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits, of using that function, here is some information.
    When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
    In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
    This info, and more, can be viewed by clicking on
    ? Help & Terms of Use, located under your login name, on all "Discussions" pages.
    Specifically What are question answers?.
    ali b

  • Hi, i'm having trouble with syncing my iPod. (after the latest iTunes-update)

    It's a classic, but I have no idea what generation... but it was bought in early 08, and have 80gb. Anyway, it has been working fine all the time, but by the latest iTunes-update, it has stopped working. (mac) Every time I try to connect it with my computer, iTunes says that "this iPod appears to be destroyed, try to restore" (I'm having iTunes in Norwegian, so not sure if this is the direct translation, but hopefully you'll get the picture) - and I try to do this, again and again, but nothing seems to work. I have tried to turn off the computer, put iPod in disc-mode, let the battery run out, give it a two-week break, and now I'm out of guesses on what to do. But no matter what I do it allways appear to have zero songs on it after I am done syncing, and I allways get the "try to restore"-message when i connect it again.
    It's possible that it's just old age or something, but I really want to try everything first, as it seems to be all right otherways. It also works when I connect it with my friend's  PC, but since she has ****** taste of music () it's not an option. I have a MacBook, also from 2008.
    And just to clearify. I have an iPad2, and an old iPod nano (2006) and both works with my computer/iTunes.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for

  • MBP strange flickering blocks of multi-coloured lines on screen

    Hi over the past few weeks when awaking from sleep my MBP 13" (mid-2012) has had this problem <a href="http://s1204.photobucket.com/user/sjwhite26/media/IMG_0035.jpg.html" target="_blank"><img src="http://i1204.photobucket.com/albums/bb404/sjwhite26/

  • How to Get the sentitems count in exchange server 2010

    hi, I want to take all users sent items count in exchange 2010

  • Using Field/Column Date Value In Case Statement

    I have code that the first part works (the part that evaluates null). However, it appears the second part doesn't work. The error I get is: Data Value out of range Can you use the a table column value in a Case statement? What I'm trying to do is: wh

  • SQL Anywhere 11 databases are getting corrupt

    Hi We are having problems with databases that are getting corrupted. We have a server that runs a SQL Anywhere 11 database. (the consolidated database) Beside that, we have about 15 remote databases that run on the laptops of our mobile workforces. T

  • Change order of post entries in blog

    Hi All Just getting my feet wet with iweb 09, and so far it is a decent programme, but I have 1 major question.. in the blog section, how do I get the blog to post from earliest to most recent, so that the first post is on the top 1st entry and the m