HT201363 I am having a problem when it comes to my apple ID.
I am confused with the Apple ID and the ICloud ID... which one should be used> everything was good until Icloud came about. I am also have problems with
my internet ever since I upgraded to IOS 8 and Iphone 6 came about. All of my streaming is very slow and games cannot upload.
I have denise@**** which is the 1st ID that I have. Then when Icloud came about I have dennydisco@****. But I am having a problem signing into dennydisco.Also with my Birthday not being correct
<Email Edited By Host>
The @icloud.com address is an alias of your @dfarve.com address (if that's the one that's listed in Settings>iCloud on your phone). You can use either one to sign in on iCloud.com from your computer, but your main iCloud ID is the @dfarve.com address.
If your birthday is not correct on your Apple ID, go to appleid.apple.com to manage the ID, sign in. If you are using two-step verification on the ID, select the Name, ID and Email Addresses section, then change the birth date on the bottom right. If you are using security questions instead of two-step verification, select the Password and Security Question and answer the two security question to access and change the birth date. If you are unable to change your birth date, contact the Apple account security team and ask for assistance: Apple ID: Contacting Apple for help with Apple ID account security.
Similar Messages
-
I am having the problem when trying to take a panorama picture.
It may only take the first frame or doesn't even start at all when I press the shutter button.
even though when i hold the phone straight up and down, so that camera is at the top on the back and the home button is on the bottom on the front.
This problem is irritating me....?To take panorama
- ensure that the panorama option is on
- press the shutter button once
- you will see a line with an arrow
- move around in a circle ( I keep the camera steady and turn myself around in a circle)
- as you do this you will see the arrow moving across the screen as it captures pictures
- at the end of the capture, you will be able to see your panorama picture
I hope that this helps, do report back. -
I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.
After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.
-
I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!
The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
-
I downloaded the 09 version without deleting the 08 (didn't know), and now I am having some problems : when I open a document, it opens with 09, and then when I try to re-open it with 08 it is not possible ! I have a message saying tha "the fichier index xml is absent" (my computer is in French. I want to work with pages 08 until I get familiar with the 09 version. What shall I do ? What does this happen?
Once you open the files in the new version you can't open them in the old version. Pick one version to use (have to be 9 now as you already have converted files)
-
Having a problem when scrolling through one clip: a different clip scrolls through point and time simultaneously. Can you please assist us?
First question: this is a Captivate forum, are you sure that you have a Captivate problem (with cpvc or an imported video)?
-
On my Ipad I seem to be having a problem when trying to play YouTube videos embedded on Facebook.
When I click the links, I get a message saying: "Flash Player upgrade required."
and under it, it says, "You need to download and install the lastes version of Adobe Flash Player to view this content"
and also a green button saying "Get Flash Player"
I get this if using chrome or safari .
I can go direct to YouTube it just works.The Facebook link to the video is accessing an Adobe Flash video. Unfortunately, no iOS devices can play flash.
-
Since the last software update for mountain lion, I am having a problem when trying to remove any screenshots to the trash. A box appears saying "Finder wants to make changes. Type your password to allow this"
I have checked Finder Preferences and cannot find any box that I can 'UNTICK' to resolve this. I sometimes take a lot of screenshots when I am researching something and now find I have to enter my password for every screenshot to be removed to trash.
Anyone got a solution please, ThanksHave you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
-
I am using Mac 10.4.11 and I am having a problem when my printer wont print what I tell it too. Please Help!
A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan -
Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.
-
Hello, I'm using a PAP2T and I'm having a problem when I...
Hello, I'm using a PAP2T and I'm having a problem when I dial into a menue, I can dial perfeclty but when I dial into a menu my phone will not send the digits pressed. In other words press 1 for so and 2 for so, I can press either and nothing happens. Recently I rebooted my PAP2T and since then I can't figure out what the problem is. Can anyone help. Thanks.
Maybe this has the fix for your problem:
http://forums.linksys.com/linksys/board/message?board.id=VoIP_Adapters&message.id=440&query.id=157098#M440
Anyway if it doesn’t, just try to search this forum with something like DTMF. -
i got my iphone sent from germany and now i am having reception problems, but it comes wiv a full warranty.can i be able to get a replacement one in the uk?
Well, you learn something everyday don't you
-
Anyone having this problem when using iPhoto and iMovie?
I've posted this question in the iMovie forum without much luck. I hope someone here may have some ideas.
I make iMovies that are largely composed of still photos. Recently I'm having trouble with the preview screen in iMovie. When I click on a photo in the media browser it will not show up in the Preview pane but the little scrubber runs across the bottom anyway. If I click "apply" the photo will import into the iMovie timeline and I can then see it in the preview pane...sometimes. Sometimes not. It is the erratic nature of this problem that is driving me buggy (pardon the pun).
Sometimes the picture will do exactly what it supposed to -- pop up in Preview and I can make adjustments. Other times, no. Sometimes it is pictures right next to one another -- one works the other doesn't.
Is anyone else having a problem like this. My thought now is that it may be related to the size of the library since the problem seems to be on large libraries whereas projects that I do with 100 pictures or so (in a seperate project library) don't give me any grief but my large travel libraries do.
Thanks.
iMac G5 Mac OS X (10.4.8) iLife '06Another possibility might be the color profile bug that was introduced with iPhoto 6.0.5 and, maybe, Quicktime 7.1.3. It's a long shot but if Terence's suggestion doesn't help you can try the following:
1 - download the "Embed sRGB Profile" Automator application from Toad's Cellar.
2 - unzip it and drop the files that are giving you problems onto it.
3 - import those newly embedded files into iPhoto and see if they work.
As I said it's a long shot but worth a try if other attempts fail.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
I'm having a problem I've shipped amyl $ 25 and now tell me Enter amyl reservists and has introduced wanted more meaningful than once and now tells me I timed help and thank you
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
I open emails with multiple images. The new version is having a problem opening a tab with more than maybe 6 or 7 images. Older versions sometimes had the same problem but the unopened images appeared on the page as a small blank box that you could try to reload. Not anymore. Now you have to reload the whole tab. Sometimes this works other times it doesn't.
You seem to be using a beta version. Maybe go back to a regular release and wait for V. 30 to become a regular release, and maybe whatever bug it is will be fixed.
Maybe you are looking for
-
Hi all : I save a HTML FILE ,, I want to print this file from labview ,, how can I do that thanks
-
After upgrading to Mountain Lion, Interface builder starts up with an error every boot.
I've got a late 2008 Macbook Unibody 13", and a few months back I upgraded from Snow Leopard to Mountain Lion. Ever since the upgrade, at every boot up Interface Builder starts up with an error. I've just ignored it mostly, but now I'm getting anno
-
I sync my address book with both my . me account and via itunes with my iphone, also it appears in my bento and my bento on my iphone. all worked well till bento 3 (not sure this caused it, but timing is same as problem) now it does not sync anymore
-
How to change the size of Bex Variable screen?.
Hi Experts, Can we able to change the size/font of the Bex query variable screen?. I have a requirement where lot of variables used but query variable screen is not showing up all the variables including the 'execute,cancel, check' menu buttons. Is t
-
IPlanet NSAPI -- problem with KeepAlive connections
Hi I have problems with following scenario: When client establish KeepAlive connection with iPlanet server it sends one important custom header only on first request. My goal is to implement filter that will add this header to all subsequent requests