HT201363 I forgot my passord code for my phone and I am current lock out, plus I have disabled my iphone

I type in the incorrect passwrod for my iphone and now I am currently lock out. My phone is now disabled. What is the next step to take

Follow these steps:
http://support.apple.com/kb/ht1212

Similar Messages

  • I forgot my pass code for my iPad and cannot open.

    I forgot my passcode for my Ipad and cannot unlock. The Ipad tells me to connect to Itunes but cannot do anything until i put in the passcode. What can I do to unlock Ipad?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • HT201363 I forgot my security questions for apple id and i dont remember my email, what do i do ?z

    I Bought an itunes card and pu it on my friends apple id account and we dont know the answers to our securty questions. We also dont remember our email adress so what xan we do to reset the apple id security question?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • TS2446 My child wants her own Apple ID for her new phone and mac book. Not sure of steps to disable and creat new account while transferring photos etc. thoughts ?

    My child wants her own Apple ID for her phone and mac book. Not sure of steps to disable and create new account while transferring photos etc. thoughts ?

    Welcome to the Apple Community.
    Unfortunately, if Apple simply allowed people to log into different accounts and download content, everyone would be using everyone could share everyone else's content and bypass the need to purchase anything. To protect against this, they limit you to logging into a new account to once every 90 days.
    If two or more of you, have different accounts and use only one computer, you should each have your own user account on the computer, to avoid the need to log in and out of iTunes.

  • I forgot my security code for nokia 5800 Xpress Mu...

    Dear all,
               hope you all will be fine doing good, my problem is that i forgot my security code for 5800 XM  is there any way i can restore my security code to default i.e "12345"
    best regards
    Usman Ali
    Solved!
    Go to Solution.

    a factory reset in this case would not work becoz u still need the security code to get the reset done...if u dont know what the security code is then u wont be able to proceed with the reset
    u will have to take the phone to a nokia care point for assistance from a technician - locations are found by clicking the "contact us" link
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • HT201303 I forgot my security code for my payment method.  How do I change it?

    I forgot my security code for my payment method.  How do I change it?

    Check the AppleCare number for your country here:
    http://support.apple.com/kb/HE57
    Call them up, and let them know you would like to be transferred to the Account Security Team.

  • I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

    i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

  • T-code for cancelled Invoice and cancelled Excise Invoice

    Dear Guru,
    kindly let me know the T-code for cancelled Invoice and cancelled Excise Invoice.
    Wishes,
    Abhishek

    Hi Abhishek,
    I am not aware of any T-code through which you can see the cancelled invoice. I think either you have to go for development (SQVI)
    or
    Extract the list of your all billing document like billing document created from 01.01.2010 to 22.04.2010
    Now go to SE16 --> Table VBFA --> Give your billing document number in field "Preceding Doc." --> and in the field "Subs.doc.categ." --> choose entry "N     Invoice cancellation" --> system will show you all the entries for which cancellation billing document has been created.
    or
    Go to SE16 --> Table VBRK --> enter your billing document list --> In the field "Posting status" --> Choose  option "E      Billing Document Canceled"
    Hope it helps,
    Regards,
    MT

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

    Is there example code for using Ni488 and PCI-GPIB card in non controller mode?

    cymrieg,
    Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
    One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
    Hope this helps, but let me know if you need more information.
    Scott B.
    GPIB Software
    National Instruments

  • Hi basically when i try download a app its saying sign in required ask for sercurity code for bank card and i put the correct details in and still saying its invalid? Can anyone help

    Hi basically when i try download a app its saying sign in required ask for sercurity code for bank card and i put the correct details in and still saying its invalid? Can anyone help

    Refusal of a card is based on information provided matching what is on file from your credit card provider. If it is refused, it generally means something is not matching. That can inclue the name, the address or other information. It has to be exact to match. If you check your credit card bill to make sure you are spelling the name correctly, the address is listed correctly, and yes, ST is different than Street, and it still does not work, contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

  • How to write code for page up and page down buttons on alv screen?

    Hi,
    Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n)  these are enabled and working properly, but we can't debug this with /h
    How to write code for page up and page down buttons on alv screen?

    Poonam,
    On doing the screen debugging it took me over to    Include LSTXWFCC ,kindly check the below code.
    module cc_display.
      fcode = sy-ucomm(4).
      case sy-ucomm(4).
        when 'P--'.
          perform cc_firstpage.
        when 'P-'.
          perform cc_prevpage.
        when 'P+'.
          perform cc_nextpage.
        when 'P++'.
          perform cc_lastpage.
        when 'EX--'.
          perform cc_firstcopy.
        when 'EX-'.
          perform cc_prevcopy.
        when 'EX+'.
          perform cc_nextcopy.
        when 'EX++'.
          perform cc_lastcopy.
    I guess it can give you some lead.
    K.Kiran.

  • Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App

    I Have purchased the Firefox OS phone but i am Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App

    Unfortunately, we do not provide support for apps. You should contact the developer of the app for more information. From what I can see, you are not getting anything from all apps. A simple thing you can to do is to reboot the phone.
    To reboot your phone:
    #Take the back cover of the phone off.
    #Take the battery out.
    #Take the SIM card and microSD card out (if applicable).
    #Wait 10 seconds.
    #Put the SIM card and microSD card back in (if applicable).
    #Put the battery back in.
    #Put the back cover back on.
    #Turn the device on.
    #Check if the issue you were having is still present.
    Please report back to us if this solved your problem!
    Thank you

  • I downloaded the whatsapp for my phone and i can't find this code i have to put in. Help!

    i downloaded the whatsapp for my phone and i can't find this code i have to put in. Help!

    My phone had the same problem with yours before.
    Here is my solution.
    Install a software that setup an android system to your computer
    Inside the "an android system", install Whatsapp
    run Whatsapp, input your phone number to get the code
    At this time, your phone suppose to receive your code.

  • HT1725 I had an itunes redemption code for a movies and got the following message: "code redemption temporarily unavailable. Try again later." several times.  How do I get my movie?

    I had an itunes redemption code for a movie and got the following message, "code redemption temporarily unavailable. try again later."  How do I get my movie?

    Hi r.viel,
    I'm sorry to hear you are having issues with your redemption code.
    The following article should help you with this:
    iTunes Store: Invalid, inactive, or illegible codes
    If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
    Contacting iTunes Store Support
    Go to the iTunes support page and select your iTunes country.
    From the iTunes support page, choose Contact Support on the lower-left side of the page.
    Follow the instructions to get iTunes Store support assistance.
    I hope this information helps ....
    Have a great day!
    - Judy

Maybe you are looking for

  • ADF RC on Tomcat

    Has anyone gotten ADF RC to work on Tomcat (or JBoss or Glassfish). I know an updated ADF RC installer is not out, but I wanted to know if someone got something working. Here are the following links I have found... [unanswered question on a blog|http

  • Why JSP not move to jhtml direction?

    I have both knowledge of JSP and JHTML (from ATG). I like jhtml much more. The jhtml architecture is far superior than jsp. I just list following features: * better component naming, using directory and properties, instead of jsp. * excellent Form ha

  • Looking for a BAPI that does the same as /$SYNC

    Dear Experts, Could someone tell me which BAPI resets all buffers, I need one just like running /$SYNC. Thanks in advance. PS: I use a system for test purpose, not a real one in a company.

  • I want to delete all my apps

    Hi I have itunes on a mac and the kids have 408 apps on my computer. Of which things like 4 different types/copies of a battery status are clearly not needed. I want to blitz them all and just delete the lot. However, they both have purchased items t

  • Handling IKM in ODI

    Hi I have a requirement where i have to execute 9 interfaces to load to 9 tables. Either all the tables should be loaded or none should be loaded. For this I am using IKM SQL Control Append and have modified the commit value to 'No' both in the IKM a